Login       My Wishlist
  My Cart
$0.00 / 0 items
 
In The National Interest
Politics and Policy in the Interest of the Nation
 
International Access
Global Shipping Options Available
Home About Us News Our Blog Our Catalog My Cart My Account Track Shippment Contact Us
  Our Catalog

Chemglass - Super Savings! Save up to 40%


Super Savings! Up to 40% off on Chemglass products at In The National Interest. Hurry! Limited time offers. Offers valid only while supplies last.



Chemglass CG-1213-14 Glass Style A Reflux Condenser, 100mm Jacket Length, 205mm Height, 14/20 Joint
Chemglass CG-1213-14 Glass Style A Reflux Condenser, 100mm Jacket Length, 205mm Height, 14/20 Joint
In Stock
$128.88

mpn: CG-1213-14,

Coil style reflux condenser with tightly wrapped coil providing maximum cooling. Excellent for use with high vapor pressure solvents. Condenser has a top outer standard taper joint and lower inner drip tip joint. Hose connections have an O.D. Of 10mm...


Chemglass CG-1506-20 Glass 500mL Heavy Wall Single Neck Round Bottom Flask, with 24/40 Standard Taper Outer Joint
Chemglass CG-1506-20 Glass 500mL Heavy Wall Single Neck Round Bottom Flask, with 24/40 Standard Taper Outer Joint
In Stock
$32.99

mpn: CG-1506-20,

Round bottom, heavy wall single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Flasks with joint sizes other than those listed are available.Heavy wall. ...


Chemglass CG-1506-11 Glass 150mL Heavy Wall Single Neck Round Bottom Flask, with 24/40 Standard Taper Outer Joint
Chemglass CG-1506-11 Glass 150mL Heavy Wall Single Neck Round Bottom Flask, with 24/40 Standard Taper Outer Joint
In Stock
$31.30
$29.29
You Save: 6%

mpn: CG-1506-11,

Round bottom, heavy wall single short neck flask with a standard taper outer joint.Heavy wall single neck round bottom flask. Come with 24/40 standard taper outer joint. 150mL capacity. ...


Chemglass CG-1218-01 Glass Liebig Condenser, 200mm Jacket Length, 320mm Height, 24/40 Joint
Chemglass CG-1218-01 Glass Liebig Condenser, 200mm Jacket Length, 320mm Height, 24/40 Joint
In Stock
$97.50
$67.48
You Save: 31%

mpn: CG-1218-01,

Condenser has a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. Of 10mm at the middle serration.24/40 joint. 200Mm jacket length. 320Mm height. ...


Chemglass CG-1506-17 Glass 250mL Heavy Wall Single Neck Round Bottom Flask, with 24/40 Standard Taper Outer Joint
Chemglass CG-1506-17 Glass 250mL Heavy Wall Single Neck Round Bottom Flask, with 24/40 Standard Taper Outer Joint
In Stock
$27.49

mpn: CG-1506-17,

Round bottom, heavy wall single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Flasks with joint sizes other than those listed are available.Heavy wall. ...


Chemglass CG-1216-01 Glass Reflux Coil Condenser, 200mm Jacket Length, 315mm Overall Length, 24/40 Joint
Chemglass CG-1216-01 Glass Reflux Coil Condenser, 200mm Jacket Length, 315mm Overall Length, 24/40 Joint
In Stock
$111.09
$105.54
You Save: 5%

mpn: CG-1216-01,

The Chemglass CG-1216-01 borosilicate glass reflux coil condenser is used for distillation applications and has a coil-formed inner tube to circulate coolant and increase the surface area for cooling the condensed liquid for high-speed condensing. Th...


Chemglass CG-1206-01 Glass Allihn Condenser, 200mm Jacket Length, 330mm Height, 24/40 Joint
Chemglass CG-1206-01 Glass Allihn Condenser, 200mm Jacket Length, 330mm Height, 24/40 Joint
In Stock
$99.10
$69.37
You Save: 30%

mpn: CG-1206-01,

Allihn style reflux condenser with a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. of 10mm at the middle serration.200Mm jacket length. 24/40 joint. 330Mm height. ...


Chemglass CG-1218-A-20 Glass Small Scale Liebig Condenser, 110mm Jacket Length, 185mm Overall Length, 14/20 Top Outer Joint, 14/20 Lower Inner
Chemglass CG-1218-A-20 Glass Small Scale Liebig Condenser, 110mm Jacket Length, 185mm Overall Length, 14/20 Top Outer Joint, 14/20 Lower Inner
In Stock
$61.75
$46.90
You Save: 24%

mpn: CG-1218-A-20,

Small scale liebig condenser with a standard taper outer joint at the top and a lower inner drip tip joint. Hose connections have an O.D. Of 10mm at the middle serration.14/20 lower inner. 110Mm jacket length. 185Mm height. ...


Chemglass CG-1500-27 Series CG-1500 Flat Bottom Flask for Extraction Apparatus, Single Neck, 24/40 Outer Lower Joint, 300 mL Capacity
Chemglass CG-1500-27 Series CG-1500 Flat Bottom Flask for Extraction Apparatus, Single Neck, 24/40 Outer Lower Joint, 300 mL Capacity
In Stock
$41.21
$28.35
You Save: 31%

mpn: CG-1500-27,

Soxhlet type extraction apparatus used for continuous extraction of solids with a suitable solvent. Extractor uses paper or CG-1372 glass thimbles. Condenser has an enlarged uptake tube to improve condensing capacity. Complete apparatus consists of a...


Chemglass CG-1520-14 Glass 1000mL Round Heavy Wall 2 Neck Bottom Boiling Flask with 24/40 Standard Taper Outer Joint and 20 Degree Angle
Chemglass CG-1520-14 Glass 1000mL Round Heavy Wall 2 Neck Bottom Boiling Flask with 24/40 Standard Taper Outer Joint and 20 Degree Angle
In Stock
$92.00
$54.99
You Save: 40%

mpn: CG-1520-14,

Round bottom, heavy wall two neck flask with standard taper outer joints on both the center neck and angled side neck. Flasks with 10/30 side neck are for use with cg-3506 thermometers. The 29/26 center neck flasks have a groove tooled just below the...


Chemglass CG-1032-01 Kjeldahl Distilling Trap Adapter with 24/40 Joint
Chemglass CG-1032-01 Kjeldahl Distilling Trap Adapter with 24/40 Joint
In Stock
$53.75
$53.46

mpn: CG-1032-01,

Adapter is placed above flask to prevent Carry-Over of reactions which have a tendency to foam. With top standard taper outer and lower inner joints, both being the same size.Distilling trap. Kjeldahl. 24/40 joint size. ...


Chemglass CG-1720-04 Powder Funnel for Introduction of Solids or Liquids, 60° Side Angle, 24/40 Standard Taper Inner Joint, 150mm Top Diameter
Chemglass CG-1720-04 Powder Funnel for Introduction of Solids or Liquids, 60° Side Angle, 24/40 Standard Taper Inner Joint, 150mm Top Diameter
In Stock
$46.32

mpn: CG-1720-04,

Useful for the introduction of solids or liquids into reactions under atmospheric conditions. Funnels have 60° side angle and a standard taper inner joint.With 24/40 inner joint. 150Mm diameter. Sold as each. ...


Chemglass CG-1520-18 Glass 2000mL Round Heavy Wall 2 Neck Bottom Boiling Flask with 24/40 Standard Taper Outer Joint and 20 Degree Angle
Chemglass CG-1520-18 Glass 2000mL Round Heavy Wall 2 Neck Bottom Boiling Flask with 24/40 Standard Taper Outer Joint and 20 Degree Angle
In Stock
$159.70
$111.19
You Save: 30%

mpn: CG-1520-18,

Round bottom, heavy wall two neck flask with standard taper outer joints on both the center neck and angled side neck. Flasks with 10/30 side neck are for use with cg-3506 thermometers. The 29/26 center neck flasks have a groove tooled just below the...


Chemglass CG-1506-29 Glass 5000mL Heavy Wall Single Neck Round Bottom Flask, with 24/40 Standard Taper Outer Joint
Chemglass CG-1506-29 Glass 5000mL Heavy Wall Single Neck Round Bottom Flask, with 24/40 Standard Taper Outer Joint
In Stock
$156.65
$109.66
You Save: 30%

mpn: CG-1506-29,

Round bottom, heavy wall single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Flasks with joint sizes other than those listed are available.Heavy wall. ...


Chemglass CG-1213-L-21 Glass Reflux Coil Condenser, 175mm Coil Length, 350mm Height, 24/40 Joint
Chemglass CG-1213-L-21 Glass Reflux Coil Condenser, 175mm Coil Length, 350mm Height, 24/40 Joint
In Stock
$253.25
$227.93
You Save: 10%

mpn: CG-1213-L-21,

Similar to CG-1213, but having a larger diameter jacket and coil, thereby providing maximum cooling capacity, while being shorter in length. Jacket has an O.D. of 41mm while the coil O.D. is 8mm. Excellent for use with high vapor pressure solvents. C...


Vented Cap, GL-25, Blue, Autoclavable Polypropylene, Pack/5
Vented Cap, GL-25, Blue, Autoclavable Polypropylene, Pack/5
In Stock
$116.65

mpn: CLS-1484-25,

Polypropylene GL25 vented bottle caps, blue, for glass media bottles. Features a 0.22um (PTFE) hydrophobic membrane to allow gas exchange while preventing contamination. They have a liner-less plug seal design for efficient sealing. These vented caps...


Vented Cap, GL-32, Blue, Autoclavable Polypropylene, Pack/5
Vented Cap, GL-32, Blue, Autoclavable Polypropylene, Pack/5
In Stock
$117.35

mpn: CLS-1484-32,

Polypropylene GL32 vented bottle caps, blue, for glass media bottles. Features a 0.22um (PTFE) hydrophobic membrane to allow gas exchange while preventing contamination. They have a liner-less plug seal design for efficient sealing. These vented caps...


Chemglass CG-1214-05 Glass Graham Condenser, 10mm OD, 300mm Jacket Length
Chemglass CG-1214-05 Glass Graham Condenser, 10mm OD, 300mm Jacket Length
In Stock
$100.17

mpn: CG-1214-05,

Condenser has a top standard taper outer and lower inner drip tip joint. Hose connections have an O.D. Of 10mm at the middle serration.24/40 joint. 300Mm jacket length. 430Mm height. ...


Chemglass CV-1350-0011 Series CV-1350 96-Well Microplate Sealing System with 1.0 mL Glass Inserts and PTFE/Silicone Cap Mat
Chemglass CV-1350-0011 Series CV-1350 96-Well Microplate Sealing System with 1.0 mL Glass Inserts and PTFE/Silicone Cap Mat
In Stock
$55.63

mpn: CV-1350-0011,

Chemglass CV-1350-0011 Series cv-1350 96-well Micro plate sealing system with 1.0 ml glass inserts and PTFE/silicone cap mat96-Well. With 1.0Ml glass inserts and ptfe/silicone cap mat. Sold as each. ...


Chemglass CG-1016-10 Glass Bushing Adapter with 29/42 Lower Inner Joint and 24/40 Standard Taper Outer Joint
Chemglass CG-1016-10 Glass Bushing Adapter with 29/42 Lower Inner Joint and 24/40 Standard Taper Outer Joint
In Stock
$30.90
$30.44
You Save: 1%

mpn: CG-1016-10,

Bushing style adapter having a lower standard taper inner joint and outer joint ground in the bore of the adapter. Adapters having a 10/18 or 10/30 outer member in the bore are used to insert thermometers into apparatus.Bushing. 29/42 lower inner. 24...



Viewing Page 1 of 2

Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service
© 2018 - inthenationalinterest.com. All Rights Reserved.