Login       My Wishlist
  My Cart
$0.00 / 0 items
 
In The National Interest
Politics and Policy in the Interest of the Nation
 
International Access
Global Shipping Options Available
Home About Us News Our Blog Our Catalog My Cart My Account Track Shippment Contact Us
  Our Catalog

Ruland - Huge Savings! Save up to 18%


Huge Savings! Up to 18% off on Ruland products at In The National Interest. Hurry! Limited time offers. Offers valid only while supplies last.



Ruland SP-46-A Two-Piece Clamping Shaft Collar, Aluminum, 2.875'' Bore, 4 1/4'' OD, 7/8'' Width
Ruland SP-46-A Two-Piece Clamping Shaft Collar, Aluminum, 2.875" Bore, 4 1/4" OD, 7/8" Width
In Stock
$54.73

mpn: SP-46-A, ean: 0634529021552,

This Ruland two-piece clamping shaft collar is made of aluminum. It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars. The two-piece des...


Ruland QCL-32-A Anodized Aluminum Quick Clamping Shaft Collar, One Piece, 0.748'' Width, 3.937'' OD, 2.0000'' Bore
Ruland QCL-32-A Anodized Aluminum Quick Clamping Shaft Collar, One Piece, 0.748" Width, 3.937" OD, 2.0000" Bore
In Stock
$73.00

mpn: QCL-32-A, ean: 0634529135563,

Shaft collars are commonly used as guides, spacers, mechanical stops, and for component alignment on a shaft. They are one of the most common power transmission components and are found on equipment in most industries.Quick clamping shaft collars are...


Shaft Collar, Clamp, 2Pc, 1 In, Alum
Shaft Collar, Clamp, 2Pc, 1 In, Alum
In Stock
$20.51
$16.86
You Save: 18%

mpn: SP-16-A,

Carefully made by Ruland in Marlborough, MA, these shaft collars are single point faced to ensure bore to face perpendicularity for proper fit and alignment of components. Proprietary processes ensure a good fit, excellent holding power, and a fine b...


Ruland SP-8-A Two-Piece Clamping Shaft Collar, Aluminum, .500'' Bore, 1 1/8'' OD, 13/32'' Width (Pack of 2)
Ruland SP-8-A Two-Piece Clamping Shaft Collar, Aluminum, .500" Bore, 1 1/8" OD, 13/32" Width (Pack of 2)
In Stock
$21.62
$18.10
You Save: 16%

mpn: SP-8-A, ean: 0634529021897,

This Ruland two-piece clamping shaft collar is made of aluminum. It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars. The two-piece des...


Ruland JD21/33-92Y Jaw Coupling Spider, Yellow , Bore, 1-5/16'' or 33.3mm OD
Ruland JD21/33-92Y Jaw Coupling Spider, Yellow , Bore, 1-5/16" or 33.3mm OD
In Stock
$10.41

mpn: JD21/33-92Y, ean: 0634529068960,

Carefully made by Ruland in Marlborough, MA, curved jaw couplings are comprised of two hubs pressed fit with an elastomer "spider" with the same OD. Curved jaw couplings are zero-backlash by design and are well-suited to servo applications where accu...


Ruland SP-10-A Two-Piece Clamping Shaft Collar, Aluminum, .625'' Bore, 1 5/16'' OD, 7/16'' Width (Pack of 2)
Ruland SP-10-A Two-Piece Clamping Shaft Collar, Aluminum, .625" Bore, 1 5/16" OD, 7/16" Width (Pack of 2)
In Stock
$22.74
$22.32
You Save: 2%

mpn: SP-10-A, ean: 0634529020388,

This Ruland two-piece clamping shaft collar is made of aluminum. It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars. The two-piece des...


Ruland ENSP20-10MM-A 2024 Aluminum Shaft Collar, Thin Line, Two Piece, 5.5 mm Width, 20 mm OD, 10 mm Bore
Ruland ENSP20-10MM-A 2024 Aluminum Shaft Collar, Thin Line, Two Piece, 5.5 mm Width, 20 mm OD, 10 mm Bore
In Stock
$13.85

mpn: ENSP20-10MM-A, ean: 0634529138816,

Shaft collars are commonly used as guides, spacers, mechanical stops, and for component alignment on a shaft. They are one of the most common power transmission components and are found on equipment in most industries. Thin line shaft collars are des...


Ruland SC-5-SS Set Screw Shaft Collar, Stainless Steel, .313'' Bore, 5/8'' OD, 11/32'' Width (Pack of 4)
Ruland SC-5-SS Set Screw Shaft Collar, Stainless Steel, .313" Bore, 5/8" OD, 11/32" Width (Pack of 4)
In Stock
$19.96

mpn: SC-5-SS, ean: 0634529019627,

This Ruland setscrew shaft collar is made of stainless steel 303. It is a setscrew-type shaft collar for applications supporting low axial loads and simple positioning. Setscrew collars have improved holding power when the shaft material is softer th...


Ruland SP-18-F Two-Piece Clamping Shaft Collar, Black Oxide Steel, 1.125'' Bore, 1 7/8'' OD, 1/2'' Width (Pack of 2)
Ruland SP-18-F Two-Piece Clamping Shaft Collar, Black Oxide Steel, 1.125" Bore, 1 7/8" OD, 1/2" Width (Pack of 2)
In Stock
$18.96

mpn: SP-18-F, ean: 0634529020630,

This Ruland two-piece clamping shaft collar is made of black oxide steel. It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars. The two-...


Ruland SPX-6-6-F Two-Piece Clamping Rigid Coupling, Black Oxide Steel, 3/8'' Bore A Diameter, 3/8'' Bore B Diameter, 7/8'' OD, 1-3/8'' Length
Ruland SPX-6-6-F Two-Piece Clamping Rigid Coupling, Black Oxide Steel, 3/8" Bore A Diameter, 3/8" Bore B Diameter, 7/8" OD, 1-3/8" Length
In Stock
$36.26

mpn: SPX-6-6-F, ean: 0634529026434,

Shaft Couplings - Rigid Clamp Style - One piece is available in stainless steel, carbon steel or aluminum. Two piece is available in steel. Available with or without a keyway. Clamp screws are forged and treated with an antivibration coating to keep ...


Ruland CL-10-A One-Piece Clamping Shaft Collar, Aluminum, .625'' Bore, 1 5/16'' OD, 7/16'' Width (Pack of 4)
Ruland CL-10-A One-Piece Clamping Shaft Collar, Aluminum, .625" Bore, 1 5/16" OD, 7/16" Width (Pack of 4)
In Stock
$24.20

mpn: CL-10-A, ean: 0634529000014,

This Ruland one-piece clamping shaft collar is made of aluminum. It is a one-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collars. It is easier to remove and repositi...


Ruland SC-10-F Set Screw Shaft Collar, Black Oxide Steel, .625'' Bore, 1 1/8'' OD, 1/2'' Width (Pack of 4)
Ruland SC-10-F Set Screw Shaft Collar, Black Oxide Steel, .625" Bore, 1 1/8" OD, 1/2" Width (Pack of 4)
In Stock
$12.00
$11.60
You Save: 3%

mpn: SC-10-F, ean: 0634529018736,

This Ruland setscrew shaft collar is made of black oxide steel. It is a setscrew-type shaft collar for applications supporting low axial loads and simple positioning. Setscrew collars have improved holding power when the shaft material is softer than...


Ruland ENSP45-16-A 2024 Aluminum Shaft Collar, Thin Line, Two Piece, 0.394'' Width, 1.772'' OD, 1.0000'' Bore
Ruland ENSP45-16-A 2024 Aluminum Shaft Collar, Thin Line, Two Piece, 0.394" Width, 1.772" OD, 1.0000" Bore
In Stock
$14.80
$14.12
You Save: 5%

mpn: ENSP45-16-A, ean: 0634529139639,

Shaft collars are commonly used as guides, spacers, mechanical stops, and for component alignment on a shaft. They are one of the most common power transmission components and are found on equipment in most industries. Thin line shaft collars are des...


Ruland QCL-28-A Anodized Aluminum Quick Clamping Shaft Collar, One Piece, 0.748'' Width, 3.937'' OD, 1.7500'' Bore
Ruland QCL-28-A Anodized Aluminum Quick Clamping Shaft Collar, One Piece, 0.748" Width, 3.937" OD, 1.7500" Bore
In Stock
$63.87

mpn: QCL-28-A, ean: 0634529135549,

Shaft collars are commonly used as guides, spacers, mechanical stops, and for component alignment on a shaft. They are one of the most common power transmission components and are found on equipment in most industries.Quick clamping shaft collars are...


Ruland MSC-4-SS Set Screw Shaft Collar, Stainless Steel, Metric, 4mm Bore, 8mm OD, 5mm Width (Pack of 4)
Ruland MSC-4-SS Set Screw Shaft Collar, Stainless Steel, Metric, 4mm Bore, 8mm OD, 5mm Width (Pack of 4)
In Stock
$21.24

mpn: MSC-4-SS, ean: 0634529015094,

This Ruland setscrew shaft collar is made of stainless steel 303. It is a setscrew-type shaft collar for applications supporting low axial loads and simple positioning. Setscrew collars have improved holding power when the shaft material is softer th...


Ruland MSC-5-SS Set Screw Shaft Collar, Stainless Steel, Metric, 5mm Bore, 10mm OD, 6mm Width (Pack of 4)
Ruland MSC-5-SS Set Screw Shaft Collar, Stainless Steel, Metric, 5mm Bore, 10mm OD, 6mm Width (Pack of 4)
In Stock
$19.68
$19.56

mpn: MSC-5-SS, ean: 0634529015155,

This Ruland setscrew shaft collar is made of stainless steel 303. It is a setscrew-type shaft collar for applications supporting low axial loads and simple positioning. Setscrew collars have improved holding power when the shaft material is softer th...


Ruland SP-9-F Two-Piece Clamping Shaft Collar, Black Oxide Steel, .563'' Bore, 1 1/4'' OD, 7/16'' Width (Pack of 2)
Ruland SP-9-F Two-Piece Clamping Shaft Collar, Black Oxide Steel, .563" Bore, 1 1/4" OD, 7/16" Width (Pack of 2)
In Stock
$15.20

mpn: SP-9-F, ean: 0634529021934,

This Ruland two-piece clamping shaft collar is made of black oxide steel. It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars. The two-...


Ruland SC-12-A Set Screw Shaft Collar, Aluminum, .750'' Bore, 1 1/4'' OD, 9/16'' Width (Pack of 4)
Ruland SC-12-A Set Screw Shaft Collar, Aluminum, .750" Bore, 1 1/4" OD, 9/16" Width (Pack of 4)
In Stock
$12.92

mpn: SC-12-A, ean: 0634529018781,

This Ruland setscrew shaft collar is made of aluminum. It is a setscrew-type shaft collar for applications supporting low axial loads and simple positioning. Setscrew collars have improved holding power when the shaft material is softer than the sets...


Ruland CL-6HX-A 2024 Aluminum Shaft Collar, Hex Bore, One Piece, 0.343'' Width, 7/8'' OD, 0.3750'' Bore
Ruland CL-6HX-A 2024 Aluminum Shaft Collar, Hex Bore, One Piece, 0.343" Width, 7/8" OD, 0.3750" Bore
In Stock
$19.35

mpn: CL-6HX-A, ean: 0634529200230,

Shaft collars are commonly used as guides, spacers, mechanical stops, and for component alignment on a shaft. They are one of the most common power transmission components and are found on equipment in most industries.Ruland hex bore shaft collars ar...


Ruland MWCL-16-F One-Piece Clamping Shaft Collar, Double Wide, Black Oxide Steel, Metric, 16mm Bore, 34mm OD, 29mm Width
Ruland MWCL-16-F One-Piece Clamping Shaft Collar, Double Wide, Black Oxide Steel, Metric, 16mm Bore, 34mm OD, 29mm Width
In Stock
$28.50

mpn: MWCL-16-F, ean: 0634529107058,

This Ruland one-piece clamping shaft collar has a double-wide design and is made of black oxide steel. It is a one-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collar...



Viewing Page 1 of 2

Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service
© 2018 - inthenationalinterest.com. All Rights Reserved.