Login       My Wishlist
  My Cart
$0.00 / 0 items
 
In The National Interest
Politics and Policy in the Interest of the Nation
International Access
Global Shipping Options Available
  Our Catalog   Hydraulics, Pneumatics & Plumbing   Seals & O-Rings   O-Rings

029 Buna-N O-Ring, 70A Durometer, Black, 1-1/2" ID, 1-5/8" OD, 1/16" Width (Pack of 100)


029 Buna-N O-Ring, 70A Durometer, Black, 1-1/2'' ID, 1-5/8'' OD, 1/16'' Width (Pack of 100) by Sterling Seal & Supply, Inc. (STCC) at In The National Interest. MPN: ORB-029-C. Hurry! Limited time offer. Offer valid only while supplies last. This O-ring is made of black Buna-nitrile, is round in cross-section, has a durometer of 70A, and is designed for use in a wide variety of sealing applications. Buna-nitrile can have high tensile strength, and abrasion, tear, and compression set resistance. It can be used in temperatures between -30 degrees F (-34 degrees C) to 250 degrees F (121 degrees C), and is compatible for use with petroleum, HFA, HFB and HFC fluids, vegetable oil, alcohol, acids and aliphatic hydrocarbons. Buna-nitrile


Product Description & Reviews

This O-ring is made of black Buna-nitrile, is round in cross-section, has a durometer of 70A, and is designed for use in a wide variety of sealing applications. Buna-nitrile can have high tensile strength, and abrasion, tear, and compression set resistance. It can be used in temperatures between -30 degrees F (-34 degrees C) to 250 degrees F (121 degrees C), and is compatible for use with petroleum, HFA, HFB and HFC fluids, vegetable oil, alcohol, acids and aliphatic hydrocarbons. Buna-nitrile is vulnerable to acetone, ethers, esters, ozone, sunlight and weathering and should therefore not be used in ozone-generating electric motors, welding equipment, or in applications with exposure to UV light. This Buna O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation. O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section, and a hole in the center, similar to a doughnut. O-rings are available in various sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter. These Buna-nitrile O-rings meet standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.

Features & Highlights

  • Made of Buna-nitrile (also called Buna-N) for use with a variety of fluids and hydrocarbons
  • Can be used across a wide temperature range from -30 degrees F (-34 degrees C) to 250 degrees F (121 degrees C)
  • Round in cross-section to provide a seal between cylindrical overlapping surfaces
  • Durometer (hardness) of 70A for resistance to penetration
  • Meets standards defined by Aerospace Standard AS568A

Additional Information

Manufacturer:Small Parts
Brand:Sterling Seal & Supply, Inc. (STCC)
Color:Black
Model:029
Part Number:ORB-029-C
Publisher:Small Parts
Studio:Small Parts
MPN:ORB-029-C
Package Weight:0.1 pounds
Package Size:3.3 x 1 x 1 inches

029 Buna-N O-Ring, 70A Durometer, Black, 1-1/2'' ID, 1-5/8'' OD, 1/16'' Width (Pack of 100) by Sterling Seal & Supply, Inc. (STCC)

Buy Now:
029 Buna-N O-Ring, 70A Durometer, Black, 1-1/2" ID, 1-5/8" OD, 1/16" Width (Pack of 100)

Brand: Sterling Seal & Supply, Inc. (STCC)
4.8 out of 5 stars with 246 reviews
Condition: New
Lead Time: 1 - 2 Business Days
Availability: In Stock
$11.70


Quantity:  

 


View More In O-Rings.

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by Sterling Seal & Supply, Inc. (STCC), contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


Sterling Seal and Supply (STCC) ORVT343 Viton Number-343 Standard O-Ring, Fluoropolymer Elastomer, 70 Durometer Hardness, 3-3/4" ID, 4-1/8" OD
By Sterling Seal & Supply, Inc. (STCC)
mpn: ORVT343,
Sterling Seal O-Ring Viton/FKM Number-343 Standard has excellent resistance to high temperature, ozone, weather, oxygen, mineral oil, fuels, hydraulic fluids, and aromatics; It is a co-polymer based compound that has a broad chemical resistance and good compression set values. QTY 1. ORVT343This compound offers excellent chemical, temperature, aging, and ozone resistance. Low swelling in ASTM oil No. 1, and IRM 902 and IRM 903. Excellent resistance to acids, fuels, mineral and vegetable oils

Flyshop 10 Pcs Red Silicone Sealing Rings O Ring Gasket 0.75" OD 0.5" ID 0.12" Width
By Flyshop
mpn: 19 *12.8 *3.1-Red VMQ O-ring,
Designed for use in a wide variety of sealing applications;Fixed seal, oil seals, guide rings, dust seal the hole with seals, Rotary seals, water seals and shaft seals, mechanical seals;Widely used in bathroom product, valve, faucet, bearing, hydraumatic, pneumatic equipments, car, pump, home appliance, toy, electric motor, etc.OD*ID*Width : 19 *12.8 *3.1 mm / 0.75 *0.5 *0.12 inch. Color: Red; Material: Silicone (VMQ). Wear resistance, corrosion resistance, high temperature. Working temp is

Sterling Seal XP75VIT112X10 112 75D Quad Ring, Viton/FKM, Black (Pack of 10)
By Sterling Seal & Supply, Inc. (STCC)
mpn: XP75VIT112X10,
Sterling Seal & Supply X-Rings, also known as Quad-Rings, have a double sealing function as compared to an O-ring and can be used in a wide variety of static and dynamic sealing applications The four-lobed design provides twice the sealing surface in comparison to a standard O-ring The double-seal action requires less squeeze to maintain an effective seal This reduction in squeeze means less friction and improved seal life Additionally, X-Ring parting lines are between the lobes, away from the

Sterling Seal ORBN011x250 Number-011 Standard O-Ring, Buna Nitrile Rubber, 70 Durometer Hardness, 5/16" ID, 7/16" OD (Pack of 250)
By Sterling Seal & Supply, Inc. (STCC)
mpn: ORBN011x250,
Sterling Seal Buna N or Nitrile, is a copolymer of butadiene and acrylonitrile. Acrylonitrile content is varied in commercial products from 18% to 48%. As the nitrile content increases, resistance to petroleum base oils and hydrocarbon fuels increases, but low temperature flexibility decreases. Due to its excellent resistance to petroleum products, and its ability to be compounded for service over a temperature range of -65 to + 275 degrees F (- 54 to +135 degrees C), Nitrile is the most widely

Sterling Seal ORBN003x1000 Number-003 Standard O-Ring, Buna Nitrile Rubber, 70 Durometer Hardness, 1/16" ID, 3/16" OD (Pack of 1000)
By Sterling Seal & Supply, Inc. (STCC)
mpn: ORBN003x1000,
Sterling Seal Buna N or Nitrile, is a copolymer of butadiene and acrylonitrile. Acrylonitrile content is varied in commercial products from 18% to 48%. As the nitrile content increases, resistance to petroleum base oils and hydrocarbon fuels increases, but low temperature flexibility decreases. Due to its excellent resistance to petroleum products, and its ability to be compounded for service over a temperature range of -65 to + 275 degrees F (- 54 to +135 degrees C), Nitrile is the most widely

3/8" Pressure Washer QD O-Rings EPDM (1/2"ID) 100 Pack
By OSK O-Ring Service Kits
mpn: QC38ORE-100,
Pressure Washer O-Rings for Quick Disconnect Hose Fittings 3/8'' Quick Disconnect O-Rings for hot water and steam up to 400°F (204°C). Replacing the o-rings in a pressure washer nozzle since rubber o-rings eventually deteriorate. We offer many compounds to meet your specific needs. Changing your o-rings in a timely manner saves you the continual messy water leaks, loss of maximum water pressure, and unnecessary water use and costs. EPDM compound for ozone, water & UV service. Sulfur-Cured

314 Silicone O-Ring, 70A Durometer, Red, 3/4" ID, 1-1/8" OD, 3/16" Width (Pack of 25)
By Sterling Seal & Supply, Inc. (STCC)
mpn: ORS-314-25,
This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications. Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic

Fluorocarbon-212 O-Ring Pack of 100
By O-Rings.com by Boyd Corporation
mpn: V708-75/2-212-100,
VITON® is the trade name for DuPont fluorocarbon or FKM material. VITON® has a temperature range of -15F to +400F, and provides excellent resistance to a wide variety of chemicals, weather and compression set requirements. The relatively high level of fluorine in VITON® materials allows for exceptional resistance to chemical attack. Intermittent exposure to +600F can be tolerated for brief periods of time. Many industrial products are now switching to O-Rings made of VITON®, making it the

Sterling Seal ORBN045x10 Number-045 Standard O-Ring, Buna Nitrile Rubber, 70 Durometer Hardness, 4" ID, 4-1/8" OD (Pack of 10)
By Sterling Seal & Supply, Inc. (STCC)
mpn: ORBN045x10,
Sterling Seal Buna N or Nitrile, is a copolymer of butadiene and acrylonitrile. Acrylonitrile content is varied in commercial products from 18% to 48%. As the nitrile content increases, resistance to petroleum base oils and hydrocarbon fuels increases, but low temperature flexibility decreases. Due to its excellent resistance to petroleum products, and its ability to be compounded for service over a temperature range of -65 to + 275 degrees F (- 54 to +135 degrees C), Nitrile is the most widely

Sterling Seal OR75BRNVI015X250 015 75D O-Ring, FKM/Viton, Brown (Pack of 250)
By Sterling Seal & Supply, Inc. (STCC)
mpn: OR75BRNVI015X250,
Deciding on what elastomer for your application can be difficult Choose Viton when you want an O-Ring that’s compressible like kalrez but will stand up to low temperatures Viton “O” Rings by Sterling Seal & Supply Resist boric and Citric acids, ketones, hydrocarbons, and animal and vegetable oils Temperature range is -10° to 400° F Viton/FKM compounds are widely used in chemical, automotive, aerospace and industrial applications These compounds offer excellent chemical and temperature



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - inthenationalinterest.com. All Rights Reserved.