1/2-13 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 25
1/2-13 Nylon Insert Hex Lock Nuts, Stainless Steel 18-8, Plain Finish, Quantity 25 by Fastenere at In The National Interest. MPN: 3SNLF908C. Hurry! Limited time offer. Offer valid only while supplies last. A nyloc nut, also referred to as a nylon-insert lock nut, polymer-insert lock nut, or elastic stop nut, is a kind of locknut. It is a nut with a nylon collar insert that resists turning. The plastic insert is placed at the end of the nut, and its inner diameter (ID) is slightly smaller than the major diameter of the screw. The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. The nylon insert locks the nut by friction against the screw under the
Product Description & Reviews
A nyloc nut, also referred to as a nylon-insert lock nut, polymer-insert lock nut, or elastic stop nut, is a kind of locknut. It is a nut with a nylon collar insert that resists turning. The plastic insert is placed at the end of the nut, and its inner diameter (ID) is slightly smaller than the major diameter of the screw. The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. The nylon insert locks the nut by friction against the screw under the applied radial compressive force. Nyloc nuts retain their locking ability up to 250 °F (121 °C). Authorities disagree on whether nyloc nuts should be reused. For example, Carroll Smith (Carroll Smith's Nuts, Bolts, Fasteners, and Plumbing Handbook) notes that the nylon insert is not damaged by installation and therefore they can be reused many times ,and a Federal Aviation Administration Advisory Circular allows nuts to be reused if the prevailing torque is within specification. However, an Air Force Technical Order requires replacement of self-locking nuts in critical areas.
Features & Highlights
- For use with an externally threaded item that measure 1/2 inch and has 13 threads per inch.
- Width Measured From Flat to Flat 3/4"
- Height 19/32"
- Hex Socket Drive 3/4"
- 18-8 Stainless Steel provides strength and offers good corrosion resistance in many environments.
|Item Size:||1 x 6 x 6 inches|
|Package Weight:||0.85 pounds|
|Package Size:||4.5 x 0.6 x 0.6 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Fastenere, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: GLOGLOWdqg0259fgw, ean: 0798382882115,
Specifications: Material: Brass Thread Size Width Quantity G1/8 12mm 10pcs G1/4 16mm 10pcs G3/8 19mm 6pcs G1/2 24mm 6pcs G3/4 29mm 4pcs G1 35.7mm 4pcs Weight: 200g(approx.) Package Includes: 1set x Hex Nuts♣ These thin hexagonal nuts are widely used for plumbing on thread pipe and hose. ♣ Made of high quality brass, these lock nuts are sturdy and durable. ♣ There are six different sizes of lock nuts in this set that can meet you various need. ♣
By Marine Bolt Supply
mpn: 6-FHNL, ean: 8908515178813,
These type 316 stainless steel lock nuts can resist rust and corrosion even in harsh conditions. These are highly recommended for salt water, chemical or coastal environments.These are superior grade type 316 stainless steel nylon insert lock nuts. All packs are custom labeled and individually heat sealed by Marine Bolt Supply.
By RAW PRODUCTS CORP
mpn: 756554527042, ean: 0756554527042,
Metric 6M x 1.0 Nylon Insert Lock Nuts A2 Stainless Steel Qty-100Metric nylon lock nuts has a nylon polymer insert to prevent back-off by vibration. �Also known as a elastic stop nut what has a�plastic�insert that becomes threaded as the screw to bolt is threaded onto to the nut. �This is called deforming the elastic insert!. The nylon insert locks the nut to the screw by forcing the bottom face of the screw to the top face of the nut threads increasing the friction at both ends and
mpn: N 13, ean: 7316571385488,
This steel lock nut has right hand threads, uses a locking washer, and is suitable for locating a bearing and other components onto a shaft, as well as for facilitating mounting bearings on tapered journals and dismounting bearings from withdrawal sleeves. The washer (sold separately) engages a keyway in the shaft and locks the nut in position if one of the tabs is bent over into one of the slots around the circumference of the nut. Mounted bearings combine a bearing mounted inside a housing
By U-Turn Fasteners, Inc.
#10-24 Nylon Insert Lock Nut (NM), 18-8 Stainless Steel (100 Pack) Nylon Insert Lock nuts, often called Nylock Nuts, are used to eliminate or greatly reduce the loosening of fasteners due to vibration. They are usually hex shaped lock nuts that have a collar that is fitted with a ring of nylon smaller in diameter than the threads of the nut. When these nuts are tightened onto a screw or bolt, the threads of the bolt push tightly into the nylon, forming a tight seal.ADVANTAGES - Generally
By FAG Bearings
mpn: KM16, ean: 4012801174350,
The FAG KM series standard right-hand locknut with metric dimensions locks bearings onto shafts or adapter sleeves so that bearings stay in place. It is a right-handed locknut with 12 threads per inch and is made of steel for durability and resistance to deformity under heavy loads. The locknut provides four evenly spaced slots on its circumference for use with hook or striking-face wrenches when tightening into place. The dimensions and materials of the locknut conform to Deutsches Institut
By Small Parts
The 18-8 stainless steel hex nut has a self-locking toothed washer and a plain finish. It has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut. The self-locking toothed washer digs into material being fastened to help prevent loosening. The 18-8 stainless steel material provides strength and offers good corrosion resistance in many environments. The material may be slightly magnetic.Nuts are internally threaded fasteners that are
Package Description: Features: Brand new and high quality stainless steel screws and nuts. Material : Stainless Steel Type:M6x16mm Package includes: 50PCS Cage Nuts 50PCS screws 50PCS washers Warning： Choking Hazard--Small parts, not for chrildren under 3yrs.High quality M6 cage nuts screws rack mount screws for server shelves cabinets.. Durable stainless steel material：corrosion resistance，rust resistance and wear resistant which serves for a long using time.. Square cage nut
By Lexar Industrial
Lot of (300) hex lock nuts. These zinc plated nuts are 7/16-20 fine thread with a 5/8'' hex and nylon thread locking insert.Thread Diameter: 7/16-20. Hex: 5/8. Finish: Zinc.
By RAW PRODUCTS CORP
mpn: 756554524546, ean: 0756554524546,
Keps K-Lock Nuts 18-8 Stainless Steel - #10/32 Qty-100A Keps nut, also called a K-nut or washer nut, is a nut with an attached, free-spinning washer.. It is used to make assembly more convenient. Common washer types are star-type lock washers, conical, and flat washers. Keps nuts are considered to be lock nuts.