Login       My Wishlist
  My Cart
$0.00 / 0 items
 
In The National Interest
Politics and Policy in the Interest of the Nation
International Access
Global Shipping Options Available
  Our Catalog   Tapes, Adhesives & Sealants   Industrial Sealants

1" Closed Cell Backer Rod - 100 ft Roll


Huge Savings Item! Save 19% on the 1'' Closed Cell Backer Rod - 100 ft Roll by C.R. Laurence at In The National Interest. MPN: EF1C. Hurry! Limited time offer. Offer valid only while supplies last. Allows Easy Control of Sealant Application Thickness Won't Adhere to Sealants - No Bond Breaker Needed Compatible with All Cold-Applied Sealants Easy To Install Closed Cell Backer Rod is a round, flexible, closed cell polyethylene foam with an exterior ''skin'' used as a backing and thickness control device for elastomeric and other cold-applied sealants. The backer rod becomes an integral part of the joint into which it is installed and therefore is available in a range of diameters to


Product Description & Reviews

Allows Easy Control of Sealant Application Thickness Won't Adhere to Sealants - No Bond Breaker Needed Compatible with All Cold-Applied Sealants Easy To Install Closed Cell Backer Rod is a round, flexible, closed cell polyethylene foam with an exterior "skin" used as a backing and thickness control device for elastomeric and other cold-applied sealants. The backer rod becomes an integral part of the joint into which it is installed and therefore is available in a range of diameters to accommodate joints from 3/16 inch to 1-5/8 inch. It limits the depth of the sealant, therefore preventing excessive use of sealants. Because the sealant will not bond to the "skin" of the rod, it can stretch and recover with joint movement, with minimal stress being put on the points of adhesion to the substrate. Proper size selection of Closed Cell Backer Rod is important as it controls the depth of the sealant bead. It must be oversized (25 percent) to fit tightly into the joint, and function as a bond breaker to prevent bottom-side adhesion of the sealant. Diameter of Rod: 1 in (25 mm) Feet per Roll: 100 ft (30.5 m) Closed Cell Backer Rod Meets all of the requirements of the 1990 Clean Air Act. Closed Cell Backer Rod Is a "Domestic End Product" as defined in the Buy American Act, Title 41 USC 10. Closed Cell Backer Rod will not absorb water or wick water to joint walls which could cause adhesive failure. It is compatible with cold-applied sealants and its round shape promotes the preferred "hour glass" shape for joint sealants. Being easily compressible, it withstands hot and cold temperature extremes from -45° to 160° F (-43° to 71° C). It can withstand dynamic joint movement without shifting from position or losing its "grip" on the joint walls. Closed Cell Backer Rod is chemically inert, and resistant to oils, gasoline and solvents.

Features & Highlights

Additional Information

Manufacturer:C.R. Laurence
Brand:C.R. Laurence
Part Number:EF1C
Publisher:C.R. Laurence
Studio:C.R. Laurence
MPN:EF1C
Item Size:6 x 6 x 6 inches
Package Weight:1.55 pounds
Package Size:12.8 x 10.8 x 10.8 inches

1'' Closed Cell Backer Rod - 100 ft Roll by C.R. Laurence

Buy Now:
1" Closed Cell Backer Rod - 100 ft Roll

Brand: C.R. Laurence
4.0 out of 5 stars with 200 reviews
Condition: New
Lead Time: 1 - 2 Business Days
Availability: In Stock
$27.64
$22.50
You Save: 19%


Quantity:  

 


View More In Industrial Sealants.

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by C.R. Laurence, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


Boat Life Sealant Lifeseal Tube, White
By Boatlife
mpn: 3003.1014, ean: 0020537011614,
A unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. Use for sealing decks to hulls, thru hull fittings, vinyl ports, sealing/glazing windshields, and bedding marine hardware. Will adhere to metal, glass, wood, Lexan, ABS, and other materials. Not

Design Polymerics 1030 Water Base Duct Mastic Sealant Pail 0.50-Gallon
By Speedi-Products
mpn: AC-DMS 0.5, ean: 0892736001006,
Speedi-Products Low to high Velocity Air Duct sealant. Non Toxic adhesive sealant. Used for permanently sealing sheet metal and flexible duct system joints. UL-181 listed rigid fiberglass and flexible air ducts. Water based non flammable fire and weather resistant. Easy application and clean up.Low to high velocity air duct sealant, Color- Gray. Used for permanently sealing sheet metal and flexible duct system joints. UL-181 listed rigid fiberglass and flexible air ducts. Water based non

Sashco Lexel Weatherproofing Caulk, 2 Pack
By Sashco
mpn: Lexel Weatherproofing Caulk, 2 Pack, ean: 0031525130132,
Lexel Weatherproofing Caulk, 2 Pack.

GE SEALANTS & ADHESIVES M90006 Clear Silicone Caulk, 9 oz
By GE
mpn: M90006, ean: 0077027900064,
10.1 oz, clear, kitchen, bath & Plumbing supreme silicone, 30 minute water ready, 10 year mold free product protection, cartridge.This product is highly durable. The product is manufactured in United States. The product is easy to use.

Loctite 234451 567 Thread Sealant, 400 degrees F Maximum Temperature, 6 mL
By Loctite
mpn: 234451, ean: 0079340567078,
Loctite(R) 567(TM) PST(R) Thread Sealant withstands temperatures to 400 degrees F with excellent solvent resistance. Locks and seals tapered pipe threads and fittings, including high pressure applications. Disassembles with hand tools.Sale Unit: TUBE. Locks and seals tapered pipe threads and fittings. Disassembles with hand tools.

Rutland Products 76C 500-Degree RTV High Heat Silicone Seal, 10.3-Ounce Cartridge, Clear
By Rutland Products
mpn: 76C, ean: 0885923123940,
500°F heat resistant silicone sealant forms a tough rubbery adhesive seal. Adheres to most materials.Rutland High Temperature Silicone is a great solution to your sealant and adhesive needs. Forms a tough and flexible seal. Will adhere to most clean surfaces including: glass, metal, plastics, fiberglass, wood, brick, and stone.. Seal fireplace inserts, repair solar panels, apply ceramic tiles to your fireplace surround or heat shielding behind your stove, the uses are endless. Rated to

Schluter Kerdi Fix Grey Sealant 9.81OZ
By Schluter Systems
mpn: FBA_KERDIFIX/G, ean: 4011832056222,
Schluer Kerdi-Fix is a single component sealing and bonding compound with a silane-modified polymer base. It is odor-neutral, UV-and weather resistant, and contains no solvents. Kerdi-Fix is elastomeric and bonds well to most materials, such as wood, stone, concrete, metal, glass, and many plastics. Kerdi-Fix is suitable bonding Schluter Kerdi-Band and Schluter Kerdi waterproofing membrane to fixed building elements and Schluter Bara balcony profiles. Kerdi-Fix is also suitable for use as a

Permatex 25238 The Right Stuff Grey Gasket Maker, 3 oz.
By Permatex
mpn: 25238, ean: 0686226252388,
Permatex The Right Stuff Grey Gasket Maker is designed to perform under the higher torque loads associated with engines that have closely spaced bolt patterns, such as those typically found in import vehicles. This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff Grey Gasket Maker seals instantly, forming a reliable, long-lasting elastomeric rubber gasket that outperforms precut gaskets. This product is

Sashco Slab Concrete Crack Repair Sealant, 10.5 Ounce Cartridge, Gray (Pack of 12)
By Sashco
mpn: 16210-12, ean: 0031525916101,
Step outside and you’re likely to see a concrete crack in less than two seconds flat. They’re in driveways, sidewalks, garages, patios, pool decks, and basements. Cracks harbor weeds and anthills, and cause toe injuries (ouch!). They’re eyesores that never seem to go away. Changes in temperature, moisture, shifting soils, and traffic only make them worse. Enough is enough! Just say no to cracks. Use Slab: The Serious Fix for Concrete Cracks. Slab is an easy-to-apply water-based sealant

Dap 18152 Alex Plus Acrylic Latex Caulk Plus Silicone, Case of 12-10.1 Ounce Cartridges
By DAP
mpn: 18152, ean: 0070798181533,
Superior quality, multi-purpose acrylic latex caulk plus silicone. Highly flexible and durable. Excellent adhesion. Cured caulk is mildew resistant.For interior and exterior applications. Paintable and water clean-up. 35-year durability guarantee.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - inthenationalinterest.com. All Rights Reserved.