112 Silicone O-Ring, 70A Durometer, Red, 1/2" ID, 11/16" OD, 3/32" Width (Pack of 100)
On Sale Now! Save 8% on the 112 Silicone O-Ring, 70A Durometer, Red, 1/2'' ID, 11/16'' OD, 3/32'' Width (Pack of 100) by Sterling Seal & Supply, Inc. (STCC) at In The National Interest. MPN: ORS-112-C. Hurry! Limited time offer. Offer valid only while supplies last. This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications.
This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications.
Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels.
O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.
This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.
This silicone O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.
Features & Highlights
- Made of silicone for use with a variety of chemicals and fluids
- Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)
- Round in cross-section to provide a seal between cylindrical overlapping surfaces
- Durometer (hardness) of 70A for resistance to penetration
- Meets standards defined by Aerospace Standard AS568A
|Brand:||Sterling Seal & Supply, Inc. (STCC)|
|Package Weight:||0.07 pounds|
|Package Size:||4 x 0.75 x 0.75 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Sterling Seal & Supply, Inc. (STCC), contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By PAC Strapping Products
mpn: PAC OST68C,
Founded in 1982, PAC Strapping Products, Inc, is a full service manufacturer and supplier of plastic strapping, plastic strapping machines and systems, steel strapping, along with tools and accessories for both plastic and steel strapping. For over 2...
By Small Parts
This metric O-ring is made of black Viton and has a durometer of 75A, a round cross-section, and can be used across a wide temperature range (-15 degrees F/-26 degrees C to 400 degrees F/205 degrees C). Designed for use in a wide variety of sealing a...
Designed for fire extinguisher use, these seals show evidence of tampering when broken or removed. All-plastic one-piece construction, adjustable seals pull tight for a secure fit. 9" dateless. UL recognized.Fire Extinguisher Seals. 9 inches long. Pl...
By Clipsandfasteners Inc
mpn: 2948296, ean: 0821641517531,
BUNA-N Rubber O-RingsInside Diameter: 7/16"Outside Diameter: 5/8"Thickness: 3/32"Temperature Rating: 70 hours @ 100°C50 Per Package...
mpn: 6640000-Y, ean: 6271693438942,
Designed for fire extinguisher use, these seals show evidence of tampering when broken or removed. All-plastic one-piece construction, adjustable seals pull tight for a secure fit. 9" datelessDesigned for fire extinguisher use. All-plastic one-piece ...
By Graco Aftermarket from Foam Parts USA
mpn: oring_fusionap_kit, ean: 0694263697543,
246355 Aftermarket Graco Complete O-Ring Seal Kit for Fusion AP by Foam Parts USA. This kit is made up of the exact same or better oring material as OEM, including Viton, Viton Extreme and Teflon. Graco and Fusion are Registered Trademarks of Graco, ...
By QM Stainless
mpn: SFC0111, ean: 0761895454674,
Pack of 10 pcs. For 2" Tube OD ClampMaterial: Silicone. Size: 2" Clamp Gasket. Color: White transparent. Quantity:10pcs. ...
By DCI International
O-Ring, Buna-n, .042 X .050 Width, -002...
By Sterling Seal & Supply, Inc. (STCC)
This O-ring is made of black Buna-nitrile, is round in cross-section, has a durometer of 70A, and is designed for use in a wide variety of sealing applications. Buna-nitrile can have high tensile strength, and abrasion, tear, and compression set resi...
By Captain O-Ring LLC
The Culligan OR-150 is commonly used with filter model number Wh-S200-C. These o-rings are made of nitrile butadiene rubber (Buna-N) which offer superior flexibility and resistance to tearing during installation and long-term use. What to expect: Th...