120 Pcs, Drywall Anchor with Stainless Steel Screws Sets, Plastic Self Drilling Hollow-Wall Anchor Kit.
Extreame Savings Item! Save 41% on the 120 Pcs, Drywall Anchor with Stainless Steel Screws Sets, Plastic Self Drilling Hollow-Wall Anchor Kit. by ANCIRS at In The National Interest. Hurry! Limited time offer. Offer valid only while supplies last. This drywall anchors are generally uesd to hang big pictures mirrors and curtains. Very easy to install, you can use a hand drill, a driver or just unarmed. They are simple to remove, ideal to drywall surface with 3/8'', 1/2'' and 5/8'' of thick. suggestions: you'd better to make a per-drilled holes to ensure the anchors and wall free from damage.Do not use for ceiling applications or mounting televisions.Plastic anchors allow to screw it directly on the drywall - No hole preparation required,
Product Description & Reviews
This drywall anchors are generally uesd to hang big pictures mirrors and curtains. Very easy to install, you can use a hand drill, a driver or just unarmed. They are simple to remove, ideal to drywall surface with 3/8", 1/2" and 5/8" of thick. suggestions: you'd better to make a per-drilled holes to ensure the anchors and wall free from damage.Do not use for ceiling applications or mounting televisions.Plastic anchors allow to screw it directly on the drywall - No hole preparation required, easy to use, easy removal..
Features & Highlights
- Plastic anchors allow to screw it directly on the drywall - No hole preparation required, easy to use, easy removal.
- Anchors is made of high-strength plastic, and the screws is stainless steel, non-rust, deep thread design provides strong engagement, suitable for gypsum wallboard, with 3/8, 1/2" or 5/8" thick.
- Used these fixings raw plugs for bathroom or kitchen curtain fixation, hanging big pictures, mounting shelves, light fixtures, mirrors, and so on.
- When you tighten the screw, ribs can prevent the anchor from turning in the hole, make the screws stronger and increase the load-bearing capacity. It saves your time of drilling which is the most inconvenient part of putting the nail on a drywall. Leaving very little wall board dust when you done your work.
- What you get: 60 Plastic Anchors, 60 #8 x 1-3/8'' Stainless Steel Screws. Hangs up to 60 lbs.
|Package Weight:||0.43 pounds|
|Package Size:||4.72 x 0.87 x 0.87 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by ANCIRS, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By The Hillman Group
mpn: 47783, ean: 0008236657760,
Coarse Threaded Phosphate-Plated Steel Phillips Drive Drywall Screws feature horizontal indentations that help to securely fasten gypsum (drywall) boards to wood studs. Coarse thread screws are more popular, have higher pullout values and are faster driving. Used in commercial applications.Used to fasten drywall to studs. User-friendly and easily gripped and held. Black phosphate steel.
Grabber #6 X 1-1/4'' Bugle Head Coarse Black Phosphate -
The Grabber has superior holding power and ease of penetration, and a coarse thread screw for general interior applications. There are 8 threads per inch
and the head requires a #2 Phillips recess drive. The Bugle head is designed to seat fast and easily into soft wood or drywall.
GRABBER screws are manufactured in a ISO 9002 and ISO 14001 certified
The Bugle head is fully seated when the head is flush with the work surface. All
Zypsies Screws Rhinox Shield ASTM B695 class 55 galvanized w/ Teflon Armakote. Mostly used for wood or drywall installation.#10 X 3-1/2''. Material: Class 55 Galvanized w/ Teflon Armakote. Bugle Head Phillip Drive Deck Screws. Type 17 Auger Point For Easy Starts.
mpn: 967627, ean: 0008236771923,
Used to attach casement and baseboard moldings, trim and cabinets to drywall and studs. Extra small head design countersinks for a finished look. Ideal for drywall, particle board, sheet metal, plywood and some plastics.The product is 1/4Keg 3x8 PH Dry Screw. Easy and simple use kit. The product is manufactured in China. Coarse Thread screw. Black phosphate finish. Very versatile and easy to use.
mpn: HW8X3/4 ZWG, ean: 0686046511375,
Painted sheet metal screws. Available in colors to match common gutter and trim coil colors. Available in brown, bronze, almond, white, classic cream and clay.Sheet metal screw, 100 pack - white colored - 3/4-inch length. 1/4-inch head size. Available in royal Brown, musket Bronze, almond, white, classic Cream and clay.
mpn: Zip-In Screws Hex Washer Slotted Head, ean: 0686046510927,
A unique thread design and quality controlled manufacture spell the zip-in difference. Zip-in's sophisticated heat treat process allows the screw to taper to a fine, sharp point without sacrificing critical point strength. A single starting thread is formed down to the very tip of the point and is the source of zip-in's penetrating power. A second thread above the point engages after initial penetration and drills in the screw double fast. Zip-in screws are faster driving, with a greater
By South Main Hardware
mpn: 43237-2, ean: 0841511105446,
The South Main Hardware 1-1/4 inch #8 Black coarse thread bugle head drywall screws with #2 PHILLIPS drive are great multipurpose fasteners. These screws include a sharp point and are delivered in a sturdy cardboard box package. Drywall screws are primarily used for installing drywall in houses, buildings and offices. There are approximately 600 screws in this 3lb. Package and they are perfect for jobs big and small. Also available in a 9lb. Box.1-1/4 inch; #8 coarse thread with #2 Phillips
By Jet Fitting & Supply Corp
Since 1946 Jet Fitting & Supply has been the name called upon by manufacaturers, assemblers and 'Makers'. Jet Fitting delivers solutions to a well-diversified group of industries including aerospace, commercial, construction, electronics, marine, military, telecommunications, transportation, Makers and DIY'ers. Trust the quality of Jet Fitting Drywall Screw, K Lath (Modified Truss) Head, Phillips Drive, Twinfast Thread, Zinc Finish, Steel, (inch)Fast and Smooth Drilling. Zinc plating finish.
mpn: 1, ean: 0758399397279,
1-inch #6 bugle head, #2 phillips drive Black coarse thread, sharp point Sturdy cardboard box with view window and description label Approximately 313 per pound Meets or exceeds appropriate ASTM and UBC specifications- 2 Packs1-inch #6 bugle head, #2 phillips drive. Black coarse thread, sharp point. Sturdy cardboard box with view window and description label. Approximately 313 per pound- 2 Pounds total. Meets or exceeds appropriate ASTM and UBC specifications.
By Lexar Industrial
Lot of (2500) high quality phillips drive bugle head drywall / wood screws. These plain finish screws are #6 size and are 3/4'' in length with a coarse thread.Thread Diameter: #6. Length: 3/4. Drive Type: Phillips. Head Type: Bugle. Finish: Plain.