223 Buna-N O-Ring, 70A Durometer, Black, 1-5/8" ID, 1-7/8" OD, 1/8" Width (Pack of 100)
223 Buna-N O-Ring, 70A Durometer, Black, 1-5/8'' ID, 1-7/8'' OD, 1/8'' Width (Pack of 100) by Sterling Seal & Supply, Inc. (STCC) at In The National Interest. MPN: ORB-223-C. Hurry! Limited time offer. Offer valid only while supplies last. This O-ring is made of black Buna-nitrile, is round in cross-section, has a durometer of 70A, and is designed for use in a wide variety of sealing
This O-ring is made of black Buna-nitrile, is round in cross-section, has a durometer of 70A, and is designed for use in a wide variety of sealing applications.
Buna-nitrile can have high tensile strength, and abrasion, tear, and compression set resistance. It can be used in temperatures between -30 degrees F (-34 degrees C) to 250 degrees F (121 degrees C), and is compatible for use with petroleum, HFA, HFB and HFC fluids, vegetable oil, alcohol, acids and aliphatic hydrocarbons. Buna-nitrile is vulnerable to acetone, ethers, esters, ozone, sunlight and weathering and should therefore not be used in ozone-generating electric motors, welding equipment, or in applications with exposure to UV light.
This Buna O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.
O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section, and a hole in the center, similar to a doughnut. O-rings are available in various sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.
These Buna-nitrile O-rings meet standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.
Features & Highlights
- Made of Buna-nitrile (also called Buna-N) for use with a variety of fluids and hydrocarbons
- Can be used across a wide temperature range from -30 degrees F (-34 degrees C) to 250 degrees F (121 degrees C)
- Round in cross-section to provide a seal between cylindrical overlapping surfaces
- Durometer (hardness) of 70A for resistance to penetration
- Meets standards defined by Aerospace Standard AS568A
|Brand:||Sterling Seal & Supply, Inc. (STCC)|
|Package Weight:||0.37 pounds|
|Package Size:||5 x 3 x 3 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Sterling Seal & Supply, Inc. (STCC), contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Prince Manufacturing
The LS-3000 seal kit contains 13 O rings and back up washers to reseal the Prince LS-3000 series log splitter valves.This kit includes seals to repair the inlet relief seals, the spool seals and the pressure release detent seals on Prince LS-3000 log...
By Miller Electric
mpn: 124253, ean: 0715959127462,
Miller 124253 Fuel Tank Bushing For Bobcat 250 Diesel Engine Driven Welder/Generator...
By Small Parts
This O-Ring splicing kit is made of Black Buna-N, has a durometer of 70A, and includes 5 pieces of o-ring cord in standard cross sections, 7 feet of cord per piece. The cord has a Round cross-section and can be used across a wide temperature range fr...
By Sterling Seal & Supply, Inc. (STCC)
This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications. Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees...
By PAC Strapping Products
mpn: PAC OST68C,
Founded in 1982, PAC Strapping Products, Inc, is a full service manufacturer and supplier of plastic strapping, plastic strapping machines and systems, steel strapping, along with tools and accessories for both plastic and steel strapping. For over 2...
By Small Parts
This metric O-ring is made of black Viton and has a durometer of 75A, a round cross-section, and can be used across a wide temperature range (-15 degrees F/-26 degrees C to 400 degrees F/205 degrees C). Designed for use in a wide variety of sealing a...
Designed for fire extinguisher use, these seals show evidence of tampering when broken or removed. All-plastic one-piece construction, adjustable seals pull tight for a secure fit. 9" dateless. UL recognized.Fire Extinguisher Seals. 9 inches long. Pl...
By Clipsandfasteners Inc
mpn: 2948296, ean: 0821641517531,
BUNA-N Rubber O-RingsInside Diameter: 7/16"Outside Diameter: 5/8"Thickness: 3/32"Temperature Rating: 70 hours @ 100°C50 Per Package...
mpn: 6640000-Y, ean: 6271693438942,
Designed for fire extinguisher use, these seals show evidence of tampering when broken or removed. All-plastic one-piece construction, adjustable seals pull tight for a secure fit. 9" datelessDesigned for fire extinguisher use. All-plastic one-piece ...
By Graco Aftermarket from Foam Parts USA
mpn: oring_fusionap_kit, ean: 0694263697543,
246355 Aftermarket Graco Complete O-Ring Seal Kit for Fusion AP by Foam Parts USA. This kit is made up of the exact same or better oring material as OEM, including Viton, Viton Extreme and Teflon. Graco and Fusion are Registered Trademarks of Graco, ...