Login       My Wishlist
  My Cart
$0.00 / 0 items
 
In The National Interest
Politics and Policy in the Interest of the Nation
International Access
Global Shipping Options Available
  Our Catalog   Industrial Electrical   Optoelectronic Products   Optoelectronic Displays

50 x 5mm 12v Pre-wired Flickering / Candle Warm / Soft White LED - Ultra Bright


50 x 5mm 12v Pre-wired Flickering / Candle Warm / Soft White LED - Ultra Bright by Lighthouse LEDs at In The National Interest. MPN: 50X12V5MMFLICKERINGPREWIREDWARMWHITE. Hurry! Limited time offer. Offer valid only while supplies last. Our pre-wired Flickering LEDs are nothing but quality. The 12v 5mm Warm / clear white led puts out a nice color that is sure the illuminate your product or project. Our 5mm pre-wired leds have built in resistors so that they will work with the voltage that they are rated for. There is no need for you to add any additional resistors. The only thing you need to do is add power / ground and they will illuminate. It doesn't get much easier than that.The 5mm pre-wired leds come with a built in


Product Description & Reviews

Our pre-wired Flickering LEDs are nothing but quality. The 12v 5mm Warm / clear white led puts out a nice color that is sure the illuminate your product or project. Our 5mm pre-wired leds have built in resistors so that they will work with the voltage that they are rated for. There is no need for you to add any additional resistors. The only thing you need to do is add power / ground and they will illuminate. It doesn't get much easier than that.The 5mm pre-wired leds come with a built in resistor, all connections are heat shrinked in order to protect them and there is sufficient wire lead on all of them.This is the Flickering series of our 12v pre-wired leds. They will flicker, simulating a candle, as soon as power is hooked up to them, there is no need for any additional hardware (besides power) to make them flicker.

Features & Highlights

  • 5mm 12v Pre-wired Flickering / Candle Warm / Soft White LED - Ultra Bright (Ships from US)
  • Size: 12v 5mm Flickering LED, Color: Red, Luminosity: 15,000-18,000 mcd, Animation: Flickering / Candle
  • Forward Voltage: 12-15v (Not recommended 15v Continuous), Current: 20mA, Wavelength: N/A Warm / Soft White, Operating Voltage 12-15v (Not recommended 15v Continuous), Wire Length: Approximately 15cm (6 inches)
  • Viewing Angle: 20-30 Degrees, MountStyle: Custom, Lens Color: Clear, Resistor Built In: Yes, Additional Resistor Required: No, Shrink Wrap: Yes, Mount Style: Custom
  • Super bright LEDs, used for mods, RC, adruino, cars, HO Scale models, planes, trucks, adafruit projects, halloween, christmas, PC, Ultra Light, etc...

Additional Information

Manufacturer:Lighthouse LEDs
Brand:Lighthouse LEDs
Model:50X12V5MMFLICKERINGPREWIREDWARMWHITE
Part Number:50X12V5MMFLICKERINGPREWIREDWARMWHITE
Publisher:Lighthouse LEDs
Studio:Lighthouse LEDs
MPN:50X12V5MMFLICKERINGPREWIREDWARMWHITE

50 x 5mm 12v Pre-wired Flickering / Candle Warm / Soft White LED - Ultra Bright by Lighthouse LEDs

Buy Now:
50 x 5mm 12v Pre-wired Flickering / Candle Warm / Soft White LED - Ultra Bright

Brand: Lighthouse LEDs
4.7 out of 5 stars with 77 reviews
Condition: New
Lead Time: 1 - 2 Business Days
Availability: In Stock
$20.74


Quantity:  

 


 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by Lighthouse LEDs, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


MACROMATIC CONTROLS
By MACROMATIC CONTROLS
mpn: TAA2U,
TIME DELAY RELAY; Contact Voltage VDC:-; Time Min:0.05s; Time Max:100h; Product Range:TAA Series; Contact Configuration:DPDT; Contact Current:3A; Relay Mounting:Quick Connect; Contact Voltage VAC:240V; Nom Input Voltage:240V ;RoHS Compliant: Yes.

Adafruit Medium 32x32 RGB LED matrix panel
By Adafruit
mpn: CRESCENT ENTERPRISES-267, ean: 0700253565171,
Bring a little bit of Times Square into your home with this sweet 32 x 32 square RGB LED matrix panel. These panels are normally used to make video walls on the sides of busses and bus stops, to display animations or short video clips. They have 1024 bright RGB LEDs arranged in a 32x32 grid on the front on a 6mm grid. On the back there is a PCB with a set of dual IDC connectors (one input, one output: in theory you can chain these together) and 12 16-bit latches that allow you to drive the

20 x 5mm Super Bright Piranha LED - RGB - Common Anode
By Lighthouse LEDs
mpn: 5MMPIRANHARGBCOMMONANODE,
Technical SpecificationsWavelength: RGB (Red/Green/Blue)Lens Color: Water ClearView Angle: 25 DegreesForward Voltage: RGB 3.2-3.6vCurrent: 20-25mASize: 5mm Piranha Super FluxLuminosity: 10,000 mcdAn led that has three different colors in one led bulb. You simply have one leg that shares a common positive and then you can control the on/off state of the others by the cathodes (negative leads). There is an cathode for each led.5mm Super Bright Piranha LED - RGB - Common Anode (Ships from US).

National Semiconductor NSA1166 Monolithic LED Array Display, 6-Digit (Pack of 2)
By National Semiconductor
mpn: NSA1166,
PC board mounted, magnified, monolithic display intended for small, low cost numeric indication. Number of digits: 6. Digit height: 0.100 inch. Lens/magnification: clear, bubble 2X.Number of digits: 6. Digit height: 0.100 inch. Lens/magnification: clear, bubble 2X.

1Pcs 2.42" 128X64 OLED Display Module 12864 IIC I2C Serial Peripheral Interface for UNO R3(White Letter)
By Walfront
mpn: ASINPPOKAL12198,
Specifications: Display Size: 2.42'' Text Color: Yellow, Blue, White, Green(Optional) Resolution: 128x64 Driver IC: SSD1309 Serial Peripheral Interface Pins: 1.GND(Power Supply Ground) 2.VCC(Power Supply Positive) 3.SCL(Clock Line) 4.SDA(Data Line) 5.RES(Reset Line) 6.DC(Data/Command) 7.CS(Chip Select) Tips: The seventh pin CS signal is leaded by default; If you do not need it, you can solder R18, then CS signal is directly grounded. You can use Serial Peripheral Interface or IIC, and the

@WENDi TFT 7inch Resistive Multicolor Graphic LCD, LED Backlight, 800 X 480 Pixel, RA8875 Chip For SCM LCD
By WENDi
mpn: 1, ean: 0722204890217,
Why You Need It£¿ 7 inch 800*480 Multicolor Graphic LCD, with resistive touch screen, offers you a great eyes view and use feeling. It is embedded geometric speed-up engine, and has programmable font write cursor. SPECIFICATIONS -LCD Type: TFT -Interface: 8080 series interface -LCD Controller: RA8875 -Touch Panel Type: Resistive -Color Depth: 256/16K -Backlight: LED -Display Size (mm): 154.08 (W) ¡Á 85.92 (H) -Dot Pitch (mm): 0.0642 (W) ¡Á 0.1790 (H) -Aspect Ratio: 8 : 5 -Resolution: 800

Gecko GKBDLK600GF Aeware, IN.K600 w/ LED Display & Menu-Driven Interface
By GEC
mpn: GKBDLK600GF,
Our aim is creating trendy and very unique spa accessories and pool accessories We do modifications testing trying to find a factory and a design that could be aesthetic Our backpack will be ideal from all with renewable durable and extremely strong patterns We design our products with easy setup and storage We value for our clients and encourage them with their passionFeatures. IN K600GF keypad with overlayIN. K600-GF keypad with overlay. Package Quantity: 1. Excellent Quality.. Great Gift

REDINGTON COUNTERS P2-4816 ELECTROMECHANICAL TOTALIZING COUNTER
By REDINGTON COUNTERS
mpn: P2-4816,
REDINGTON COUNTERS P2-4816 ELECTROMECHANICAL TOTALIZING COUNTERPrice For: Each No. of Digits / Alpha: 6 Digit Height: 4.3mm Supply Voltage Range: 115V AC Power Consumption: 3.5W Panel Cutout Height: 26.67mm Panel Cutout Width: 43.69mm Character Size: 0.17'' Depth: 2.25'' RoHS Compliant: Yes.

50 x PLCC-4 SMD Blue - Ultra Bright 1210/3528 LED
By Lighthouse LEDs
mpn: PLCC4SMDBLUE,
The blue color PLCC-4 LED is a vibrant color that you can't go wrong with. 3528 or 1210 is another name that the SMD is commonly known as. This LED is used in many of today's popular electronics. We have seen them used as direct replacements in electronics to simply change the colors. They are also used for custom projects or in mass production products as well.The PLCC4 has 4 pads on it and is an easy way to distinguish the difference between the PLCC4 and PLCC2 LED, which have the same

2.8" inch 240x320 Pixels TFT LCD Display Module ILI9341 Screen Touch Panel With SD Card Socket for Arduino
By Wal front
mpn: Wal front3gophra2wi, ean: 0792117111518,
2.8 inch, 240 * 320 pixels resolution with touch panel. This LCD module is based on ILI9341 controller. It is suitable for embedded systems which require display high quality colorful image or video. With interactive control and storage purpose. Widely used for laptop, desktop computer monitor, workstation, industrial monitor, GPS, personal data processing, game machine, video phone, portable VCD, DVD and other portable devices.  Specification: Screen Size: 2.8inch Control IC: ILI9341 Display



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - inthenationalinterest.com. All Rights Reserved.