8Pcs End Mill Bits, DRILLPRO HSS CNC End Mill Cutter Drill Bits for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set 1/16" - 1/2"
8Pcs End Mill Bits, DRILLPRO HSS CNC End Mill Cutter Drill Bits for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set 1/16'' - 1/2'' by DRILLPRO at In The National Interest. MPN: DRILLPROQKOaoko120. Hurry! Limited time offer. Offer valid only while supplies last. Drillpro 8Pcs HSS CNC 4 Flute End Mill Cutter Drill Bits Notice: In order to adapt to the universal size of the world, this product is printed on the
Drillpro 8Pcs HSS CNC 4 Flute End Mill Cutter Drill Bits
Notice: In order to adapt to the universal size of the world, this product is printed on the metric system
1/16" =2mm, 1/8"=3mm, 5/32''=4mm, 3/16"=5mm, 1/4"=6mm, 5/16"8mm, 3/8"=10mm, 1/2"=12mm
Product Name: End Mill Bits
HRC: 45 degrees
Helix Angle: 30 degrees
Flute: 4 Flute End Mill Bits
Cutting Diameter: 1/16" =2mm, 1/8"=3mm, 5/32''=4mm, 3/16"=5mm, 1/4"=6mm, 5/16"=8mm, 3/8"=10mm, 1/2"=12mm
Package Included: 8 x End Mill Bits
●End Mill Bits are used for side milling, end milling, finish machining, etc.
●Apply to wood, steel, stainless steel, alloy steel, carbon steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
◀Before installing the end mill bits, you should first use the cleaning fluid to clean the end mill bits holder and the holder hole, dry them and then install.
◀When the diameter of the end mill bits comes longer, in order to avoid the accidental removal of the end mill bits, it should be used with a flat cut notched handle and the corresponding side locking way to install.
◀If the tool holder is used for a very long time, it will easily cause end mill bits to break off from the tool holder. In this case, replace the new tool holder.
●Stop immediately in the processing of anomalies when using the end mill bits and find out the reason before processing;
●Pay attention to the condition of wear and tear of the cutting edge and timely repair the end mill bits;
●Cleaning the end mill bits and use oil after using, keep end mill bits properly.
√Why Choose Drillpro
▶ Good quality and reliable brand.
▶ Within 90 days product quality is not completely satisfied, please CONTACT US, 100% refund.
▶ 24-hour feedback excellent customer service.
Features & Highlights
- ❶HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency.
- ❷ CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
- ❸APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
- ❹One Set of end mill bits Including: 8 Different kinds of Size end mills to meet your need, 1/16" =2mm, 1/8"=3mm, 5/32''=4mm, 3/16"=5mm, 1/4"=6mm, 5/16"=8mm, 3/8"=10mm, 1/2"=12mm
- ❺STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
|Color:||4 Flute End Mill|
|Item Size:||2.36 x 1.57 x 1.57 inches|
|Package Weight:||0.47 pounds|
|Package Size:||3.11 x 1.14 x 1.14 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by DRILLPRO, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: DRILLPROQKOaoko75, ean: 6585192876496,
Specification: Material: Cemented carbide Shank Diameter: 3.175mm Cutting Edge Diameter: 0.8-3.0mm( 0.8,1.0,1.2,1.4,1.6,1.8,2.0,2.2,2.4,3.0mm) Cutting Edge Length: 12mm Overall Length: 37mm Quantity: 1set (10pcs) Guaranty: Within 90 days product qual...
mpn: 1, ean: 0714046583938,
Product Name : End Mill;Material : HSS Color : Gray 01:1/2"x1/2",Cutting Diameter:1/2", Cutting Depth:1.57", Shank Diameter:1/2" 02:1/4"x1/4",Cutting Diameter:1/4",Cutting Depth:1",Shank Diameter:1/4" 03:3/8"x3/8",Cutting Diameter:3/8",Cutting De...
By YG1 Generic
mpn: EH065032S, ean: 0644725105352,
10pc) 1/2" Extra Long YG1 Generic Solid Carbide End Mill TiAlN Coated .500 YG-1 4 Flute Endmill EH065032S10pc) 1/2" Extra Long YG1 Generic Solid Carbide End Mill TiAlN Coated .500 YG-1 4 Flute Endmill EH065032S. 1/2" x 1/2" x 3" x 6". Extra Long ■ ...
By YG1 Generic
mpn: EH06504801, ean: 0644725105406,
4pc) 3/4" Extra Long YG1 Generic Solid Carbide End Mill TiAlN Coated .750 YG-1 4 Flute Endmill EH065048014pc) 3/4" Extra Long YG1 Generic Solid Carbide End Mill TiAlN Coated .750 YG-1 4 Flute Endmill EH06504801. 3/4" x 3/4" x 3" x 6". Extra Long ■ ...
By YG1 Generic
mpn: EH06506403, ean: 0644725105444,
3pc) 1" Extra Long YG1 Generic Solid Carbide End Mill TiAlN Coated 1.00 YG-1 4 Flute Endmill EH065064033pc) 1" Extra Long YG1 Generic Solid Carbide End Mill TiAlN Coated 1.00 YG-1 4 Flute Endmill EH06506403. 1" x 1" x 3" x 6". Extra Long ■ 4 Flute ...
By Drill America
mpn: CBDXL2001, ean: 0887861279055,
Size: 1, Material: Carbide, Finish: Uncoated (Bright), Flute Length: 3, Overall Length: 6, Shank Size: 1, Style: Single End, Square, Number of Flutes: 2, Center Cutting: Center Cutting. Single End Solid Carbide Micrograin Square End Mill, Made in U.S...
By Niagara Cutter
mpn: N62030, ean: 0698036620301,
Niagara Cutter’s S545 TiAlN-coated carbide square nose end mill has a 45-degree helix angle for fine-finish peripheral milling on difficult-to-machine materials, including stainless steel, titanium, and high-temperature alloys. The number of flutes...
By Simpson Strong-Tie
mpn: MDSP05013, ean: 0707392797807,
Heavy-duty Simpson carbide-tipped drill bits are premium quality, professional grade, manufactured by german engineers to the highest industry standards. They are design to meet precise tolerance requirements and incorporate proprietary features that...
The YG-1 EM209 TiAlN-coated carbide long-reach ball nose end mill has two flutes and a 30-degree helix for high-performance copy milling on alloy steel, non-alloy steel, heat-resistant steel, hardened steel, and cast iron up to Rockwell hardness C70....
At Dan’s Discount Tools, all of our products are brand-new and unused, unless otherwise clearly stated. Packaging for our products has been opened for picture-taking and inspecting only. Products may or may not be in original packaging. Our mission...