Anndason 6 Pieces Plastic PP Float Switch Fish Tank Liquid Water Level Sensor,Model: DP5200
Anndason 6 Pieces Plastic PP Float Switch Fish Tank Liquid Water Level Sensor,Model: DP5200 by Anndason at In The National Interest. MPN: 43237-2. Hurry! Limited time offer. Offer valid only while supplies last. Feature: This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other
This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other device.
Simple structure,easy installation liquid level controller.Light weight and simple working principle,high reliability.
It can be easily converted from normally open to normally close by inverting the float.
Please Note: because the current that the switch can carry is much little(0.5A), you must use a relay or contactor when it is connected by a load, relay or contactor are not included here.
6 x Float Switch
Features & Highlights
- Package Content : 6 x Water Level Sensor ;Color :Light blue and yellow
- Model No. : DP5200;Max Contact Rating : 10W
- Max Switching Current : 0.5A;Max Breakdown Voltage : 220V DC;Max Carry Current : 1.0A;Max Contact Resistance : 100m ohm
- Temperature Rating : -10 / +85 Celsuis;Float Ball Material : P.P;Float Body Material : P.P
- Cable Length : 39cm / 15.3"；Switch Body Size : 65 x 22mm / 2.6" x0.87" Thread Dia(Approx) : 16mm / 0.63"
|Item Weight:||0.11 pounds|
|Package Weight:||1.5 pounds|
|Package Size:||6.1 x 1.4 x 1.4 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Anndason, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 43237-2, ean: 6601003176552,
The texture of guide rod: PP plasticThe texture of floater: PP plasticPressure of work: 15 BarTemperature of work: -10~80℃Accurate error: ±2mm （In the water)Repeatability: ±1mm （In the water)Switch forms：N.O /N.C（Open and close frequently...
mpn: 43237-2, ean: 0723610128154,
Material: Plastic Color :Black Features: 1.The float switch is a device used to sense the level of liquid within a tank. 2.The switch may actuate a pump, an indicator, an alarm, or other device. 3.It can be easily converted from normally open to no...
By Gems Sensors
Gems probes are metallic rods with threaded ends that screw into a fitting that extends vertically down into the liquid. Series 3R: 1/4" (0.64 cm) threaded rod. 1' probe length. 1/4" NPT male.Series 3R probes are metallic rods with threaded end. For ...
mpn: NT1137, ean: 0046843616435,
SPECIFICATIONS Height (Inches): 1.75 Width (Inches): 2.5 Length (Inches): 4.0 Weight (Lbs): 0.85 Haz Material: No Freight: No Returnable: Yes Fits Models SX-208-8-3, XSINTEK. INTEK WATER LEVEL SENSOR. NT1137. High Quality. Weight (Lbs): 0.85. ...
The general purpose 3-wire ultrasonic level transmitter provides continuous level measurement up to 24.5’ with a 4-20 milliampere signal output, and is configured via the integral push button display module. The level sensor has one 10A relay which...
The general purpose ultrasonic level transmitter provides continuous level measurement up to 32.8' with a 4-20 milliampere signal output, and is configured via its integral push button display module. This non-contact liquid level sensor is ideally s...
The general purpose level controller displays engineering units with one 4-20 mA or 0-10 VDC continuous level sensor input and is offered in three configurations with optional 2 or 4 programmable relays, and an isolated 4-20 mA repeater. Each relay c...
The general purpose ultrasonic level transmitter provides continuous level measurement up to 18.0’ (5.5m) with a 4-20 mA signal output, and is configured via our free Webcal software. The level sensor has 4 programmable relays with selectable hyste...
The general purpose ultrasonic level sensor provides continuous level detection up to 26.2' with 3 programmable relays for level switch or level control functions, and is configured via the integral push button display module. Each relay can be confi...
CSA approved intrinsically safe for use in hazardous locations, the two-wire ultrasonic transmitter provides non-contact level measurement up to 18', and is ideally suited for challenging corrosive, slurry or waste liquids. Push button calibrated, th...