Apollo Valve 10-400 Series Bronze Safety Relief Valve, ASME Hot Water, 30 psi Set Pressure, 3/4" NPT Male x Female
Mega Sale! Save 24% on the Apollo Valve 10-400 Series Bronze Safety Relief Valve, ASME Hot Water, 30 psi Set Pressure, 3/4'' NPT Male x Female by Apollo Valve at In The National Interest. MPN: 1040705. Hurry! Limited time offer. Offer valid only while supplies last. This Apollo Valve 10-400 series safety relief valve has a bronze body, a 30 pounds per square inch (psi) relief pressure, a 3/4'' male National Pipe
This Apollo Valve 10-400 series safety relief valve has a bronze body, a 30 pounds per square inch (psi) relief pressure, a 3/4" male National Pipe Thread (NPT) inlet connection, and a 3/4" female NPT outlet. The valve's body and nozzle are bronze for resistance to corrosion, the seat is silicone for resistance to high temperatures, and the spring is stainless steel for resistance to corrosion. The valve can be used in operating temperatures up to 250 degrees F. This safety valve is American Society of Mechanical Engineers (ASME) safety rated for Section IV hot water heating boilers and hydronic heating systems.
Relief valves remove excess pressure or vacuum from a system. The valve openings allow fluids or gases to escape to decrease pressure, and then close once the valve reaches the reseating pressure limit. They also relieve excess vacuum by opening to release a gas into the system and then closing after it reaches its low-pressure limit. Some relief valves have an adjustment mechanism to set the pressure where the valve opens, making it suitable for various applications. Relief valves are rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in which it operates. Relief valves are used in a variety of applications, such as air compressors, petrochemical and chemical manufacturing, natural gas processing, and power generation.
Apollo Valves manufactures ball, mixing, and relief valves, actuators, water gauges, marine fittings, heating and plumbing products, and backflow prevention. The company, founded in 1928 and headquartered in Matthews, NC, meets international standard International Organization for Standardization (ISO)/IEC standard 17025:2005.
Features & Highlights
- Relief pressure preset of 30 psi for releasing excess pressure
- 3/4" male NPT threaded inlet for connecting to a female NPT threaded connection
- ASTM B584 bronze body and nozzle and stainless steel spring for corrosion resistance
- 250 degrees F maximum temperature for use in high-temperature applications
- ASME safety rated for Section IV water heating systems
|Item Size:||0 x 0 x 0 inches|
|Package Weight:||0.2 pounds|
|Package Size:||2 x 1.65 x 1.65 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Apollo Valve, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Midwest Control
Ideal for Small Air Compressors and Other Related Applications that Require a Compact Safety Valve, Set Pressure Tolerances: ± 3% of Set Pressure, Maximum Temperature: 250°F, Construction: All Brass With Zinc Plated Music Wire Spring, Resilient Sil...
Clippard’s J-Series Exhaust Valve offers a variety of design features and provides fast response times and high flow with 1/8” and 1/4” NPT ports. This compact poppet type valve is constructed of brass and is100% tested to assure the highest qu...
mpn: 334-T3, ean: 0687752022308,
Taco 334-T3 is a combination Boiler Feed Valve and Pressure Relief Valve. Features cast iron body and 1/2" threaded inlets.This boiler feed valve combination is used to automatically feed water to a system whenever the pressure in the system drops be...
By Midwest Control
Applications: Non Code Compact Size Low Flow Requirements, Temperature Range: -65°F to 400°F, Construction: Seat Cap and Piston C360 Brass (ASTM B-16), 302 Stainless Steel Spring and 440 Stainless Steel Ball, No Audible Leak at 45% Set Pressure at ...
By Midwest Control
Applications: Small Air Compressors with High Flow Requirements, Set Pressure Tolerances: ± 3% of Set Pressure, Temperature Range: -65°F to 400°F, Construction: Seat Cap and Piston C360 Brass (ASTM B-16), 17-7 Stainless Steel Spring and Silicone S...
By Kingston Valves
The Kingston Model 112CSS Safety Valve is an ASME Code Certified, precision machined brass valve with a hard seat. This valve supports ASME Code applications up to 300 psi. It also features a stainless steel ball for durability and a pull ring for ma...
By Apollo Valve
sku: A0063300, mpn: 1060415, ean: 0670750878459,
This Apollo Valve 10-600 series hot water relief valve protects against excessive water pressure due to failure of controls to regulate BTU input. It has a bronze body, a 75 pounds per square inch (psi) relief pressure, and a 3/4" female National Pip...
By National Brand Alternative
mpn: 521015, ean: 0076335040219,
Warning: do not use this product with water systems that convey or dispense water for human consumption. Heavy duty brass for shallow, deep well and submersible pumps. Spring loaded and set under pressure at 75 Lbs. Field adjustable +25 Lbs.Heavy d...
mpn: Hilitandevm1w4yrk7, ean: 0763741643072,
Specifications: Material: brass Maximum range: 16 kg/cm² Water pressure: 0.05-0.8Mpa (7.25-116psi) Valve body length: 67mm / 2.64in Height: 90mm / 3.54in Connector: DN15 20mm Inlet/outlet thread depth: 16mm Inlet pressure: 1.6Mpa (Max) / 232...
mpn: V800A1070, ean: 0085267000703,
Gas Valve Ignition Type Standing Pilot BtuH Capacity 250 000 Valve Type Standard Opening Coil Volts 24 Gas Type NG/LP Inlet Size 1/2 In. Outlet Size 3/4 In. LP Conversion Kit Yes Side Taps Yes Inlet Pressure Tap Yes Reducer Bushing Kit 3/4 x 1/2 In. ...