Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-1/2" (89 mm) Diameter, 240 Grit Size
Super Savings Item! Free Shipping Included! Save 40% on the Brush Research FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-1/2'' (89 mm) Diameter, 240 Grit Size by Flex-Hone Tool at In The National Interest. MPN: GB31224. Hurry! Limited time offer. Offer valid only while supplies last. The Flex-Hone® tool was originally created by Brush Research Manufacturing to deglaze cylinder walls in automotive applications. Brush Research
The Flex-Hone® tool was originally created by Brush Research Manufacturing to deglaze cylinder walls in automotive applications. Brush Research embraced the benefits of a plateau finish and pioneered the concept of plateau honing culminating in the introduction of the Flex-Hone tool in 1972. The Flex-Hone has gained many nicknames over the years and including ball hone, ball style hone, flexihone, dingleberry hone, bead brush, glaze breaker and glaze buster. Flexible honing with the Flex-Hone tool produces an oil holding cross hatch pattern and a true plateau finish free of cut, torn and folded metal. Any type or size of cylinder can benefit from the Flex-Hone®. These abrasive bead style brushes are produced in standard diameters from 4mm to 36 inches. Nine abrasive types are offered including silicon carbide, aluminum oxide, boron carbide and diamond allowing the tool to be tailored to finish any base material. A choice of 11 different grit selections are available for precise control of finish parameters. The elimination of peaks results in rapid ring seating, better oil control, reduced seepage in hydraulic and pneumatic applications and provides better seal performance and longer seal life. Successful applications include firearm chambers, shotgun barrels, musical instruments, combustion chambers, air compressors, pumps, valve bodies, valve guides, brake cylinders, wheel cylinders and the list goes on and on. Flex-Hone® tools are also very effective for deburring cross drilled holes, port radiusing and edge blending. Because of its unique construction, the Flex-Hone is self-centering, self-aligning, and self-compensating for wear so it does not require an elaborate set-up or special training. Deburring can be effectively automated and combined in the machining process to allow a complete cylinder finish in one operation or it can be employed as a secondary operation with equal results.
Features & Highlights
- Flexible abrasive cylinder hone for surface finishing and cross hole deburring
- Self-centering, self-aligning, self-compensating for wear
- Use by hand or in CNC equipment
- Order by actual bore size, tool produced oversized
- Sizes from 4mm to 36 inches
|Manufacturer:||Brush Research Mfg.|
|Publisher:||Brush Research Mfg.|
|Studio:||Brush Research Mfg.|
|Item Weight:||0.68 pounds|
|Item Size:||5.1 x 5.1 x 5.1 inches|
|Package Weight:||0.95 pounds|
|Package Size:||5.12 x 5.12 x 5.12 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Flex-Hone Tool, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Brush Research
Flexible Cylinder Hone made of Silicon Carbide. Hone is Made in USA by Brush Research Manufacturing. Hone is self centering and can be used with 3/8" or 1/2" chuck drill. Perfect for bore honing and cylinder refinishing. The hone size listed on the p...
By Flex-Hone Tool
mpn: BC11818, ean: 0700736745120,
' Flexible Cylinder Hone, Bore Dia. 1-1/8 In., Abrasive Material Silicon Carbide, 180 Grit, Overall Length 8 In., Hone Length 3 In., Medium Grade '...
By Brush Research
The Flex-Hone® tool is a surface refinishing tool that will is used to refinish and restore cylinder bores. The surface finish is dependant on the grit used. The tool is used for applications like engine rebuilding, hydraulic cylinders, brake rebuil...
mpn: 442-39523, ean: 0640026912583,
442-39523 Features: -Standard abrasive paste for fast metal removal. -Produces a smooth, flat surface but not a polished one. -Leaves a rust preventing film on lapped surfaces. -Uses include lapping and honing and grinding activities for valve seats,...
220 Grit, C Grade, Greased Based, Silicon Carbate, Loctite Clover Lapping Compound...
By Flex-Hone Tool
Brush Research Manufacturing rifle chamber Flex-Hone to maintain the integrity of your rifles, properly and safely removing residue from rifle chambers is essential. Using flex hone tools as rifle brushes enables you to remove any imperfections that ...
By Brush Research
A resilient, flexible, honing tool with a soft cutting action. The abrasive (points) globules each have independent suspension that assures the Flex-Hone® to be self-centering, self aligning to the bore, and selfcompensating for wear. Creates the re...
4 to 4-1/8, 105mm, 120SC, (Grit) Standard duty Flex-Hones for Block Cylinders (13 1/2OAL)...You are bidding on a Brand NewBRM Standard Duty Flex-Hone part number GB41812. This hone is for a 4 - 4.125 inch bore and has a 120 Grit. This is for honing a...
Easy to use cylinder hone that can attach to a standard hand drill or drill press.Fast and efficient deglazing and finish honing, providing a consistent cross-hatch pattern for oil retention and piston ring seating.. Ball hone style features 320 grit...
mpn: 00077240SP, ean: 0622424772402,
Osborn 77240SP Novo Flex Honing Tool. For a 38 mm - 1.5 inches Hole Diameter. 70 mm Brush Length. Overall Length is 200 mm 180 Grit Silicon Carbide.The actual NovoFlex tool will be approximately 10% larger than the hole size. NovoFlex Flexible Honing...