The device is a low cost, compact and easy to use encoder based cable-extension transducer. It is available with full stroke ranges up to 150 inches. The draw wire sensor provides an incremental encoder feedback signal.
Linear guide system, the direct determination of the guide element, such as: the length limit, gantry cranes, level measurement Hydraulic system, with the piston-oriented systems or hydraulic cylinder, the displacement sensor deflection of these devices to collect data Scalable systems, such as presses, lifts, bending machine, bending machine Chains, cranes and cable winch to adjust, such as forklifts, stage equipment, lifts and cranes device. Measuring Range :0~2000mm Detection method : Incremental encoder Revolution:0.3mm/pulse Rope :wire rope 1mm, Plastic coated wire rope ,rope maximum load: 16KG Supply Voltage :24V Dc Signals output : Pushpull with A B Z 3 channels Wiring
Red=VCC, Black = 0V, Green = A, White = B, Yellow = Z
The counter display
standard 96 × 48 × 115mm, 0 .56 inches 6 digitals display Enter the 4-20mA ,0-5v ,0-10k, 0-5k mv signals. Power supply: 24VDC Magnification range: 0.000 to 999.999 Display range: -199999 to 999999 Set zero with external switch control Installation: Snap Optional three kinds of relay output. Set two controlled values, two relay outputs can be used for control or alarm. Calibration function: Set 9 calibration points, in order to achieve linear differential fill feature Ratio can be set, determines the ratio between input signal and displayed value. can count / measure speed, via the internal parameter settings. Can automatically reset the time delay. Package Included: 1x position sensor +1x display Fast shipping, it takes 3-7days on delivery