CONFAST 3/8" (Inside/Screw 3/8" diameter) Double Expansion Anchor (50 per box)
CONFAST 3/8'' (Inside/Screw 3/8'' diameter) Double Expansion Anchor (50 per box) by CONFAST at In The National Interest. MPN: DE38. Hurry! Limited time offer. Offer valid only while supplies last. ApplicationsThe anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for
The anchor is made from Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
The anchor is designed for use in a Moist environment.
Hole Diameter/Bit Diameter
The anchor requires a 3/4" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
The minimum anchor embedment into the concrete is 2". Therefore, the anchor must be installed so that a minimum of 2" of the anchor is embedded into the concrete.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 7-1/2" from each other when measured center to center.
It is very important not to install the anchor any closer than 3-3/4" from an unsupported edge of the concrete.
Features & Highlights
- CORROSION RESISTANT BODY - Anchor body can be used in atmospheres where moisture may be present
- EXPANDS THE WHOLE LENGTH OF ANCHOR - Excellent performance in base material of questionable strength
- INTERNAL THREADS - Easy of removability
- ACCEPTS BOLTS WITH COARSE THREADS - Common type of fastener which is easy to find
- EVERY DIAMETER AVAILABLE IN ONE LENGTH - Selection simply requires choosing a diameter and then selecting the anchor
|Package Weight:||5.5 pounds|
|Package Size:||4.5 x 3.5 x 3.5 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by CONFAST, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Powers Fasteners
mpn: RAW9520DZ, ean: 0749273241153,
3/8"-16 Double Expansion Shields (Pack of 12)...
By Monster Fastener
mpn: ESAS-070-20, ean: 0014973269456,
1/4 Long Lag Expansion ShieldStyle: LagType: Expansion Shield AnchorApplication: Concrete, Brick, StoneDiameter: 1/4". Length: Long. Material: Steel. Finish: Zinc. Box of 20. ...
By Simpson Strong-Tie
mpn: LSES37S, ean: 0044315768002,
Simpson Strong-Tie LSES37S Lag Screw Expansion Shield 3/8" Short 50ct...
mpn: SE58, ean: 0820274001967,
ApplicationsThe anchor is made from Zamac . This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Moist environment.Hole Diameter/Bit DiameterThe anchor requires a 1" hole to be drilled in the ba...
mpn: DLM-B01FXMAMKM, ean: 6523493408848,
mpn: M8X50, ean: 0729043704026,
Stainless steel resistance to oxidation is not easy to rust. The purpose of the invisible screws is to splice between boards and boards.304 stainless steel screw. invisible screw. expansion screw. Bracket screw. ...
1x VC 150-6 XE 120V wS Univ. vacuum cleaner;1x Twist lock adapter 15A...
Hole Diameter: 1/2 in Anchor Length: 5-1/2 in Thread Length: 3-3/4 in Allowable Loads (Greater Than/Equal To 4000 psi Concrete): Embed Depth: 3-1/2 in Tension (lb): 2335 Shear (lb): 2190 For Base Materials: Lightweight Concrete, Uncracked Concrete, L...
Meets Ductility Requirements of ACI318 D.3.3 Product and Length Identification Mark Facilitates Quality Control and Inspection Hole Diameter: 3/8 in Anchor Length: 3-3/4 in Thread Length: 1-5/8 in Embed Depth (Nominal): 2-1/4 in Allowable Static Load...
mpn: 00332107, ean: 0743153792766,
Hilti IDP 4/6 Insulation Anchor has a specially structure head to help ensure bonding of plaster is applied directly over the anchor. There are no metal parts which reduces the potential condensation behind finished coat of EIF systems.Installation i...