Login       My Wishlist
  My Cart
$0.00 / 0 items
 
In The National Interest
Politics and Policy in the Interest of the Nation
International Access
Global Shipping Options Available
  Our Catalog   Fasteners   Anchors   Sleeve Anchors

CONFAST 5/16" x 2-1/2" 304 Stainless Steel Hex Sleeve Anchor (100 per box)


CONFAST 5/16'' x 2-1/2'' 304 Stainless Steel Hex Sleeve Anchor (100 per box) by CONFAST at In The National Interest. MPN: SAHS516212. Hurry! Limited time offer. Offer valid only while supplies last. ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Wet environment.Head Style The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached.Hole Diameter/Bit DiameterThe anchor requires a 5/16'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI


Product Description & Reviews

ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Wet environment.Head Style The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached.Hole Diameter/Bit DiameterThe anchor requires a 5/16" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 5/16".Length Anchor The length of the anchor is 2-1/2"Minimum EmbedmentThe minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1/2". This will ensure that the minimum embedment of 1" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 5/16" diameter anchor requires the hole in the fixture to be 3/8".Spacing between AnchorsEach anchor must be spaced a minimum distance of 3-1/8" from each other when measured center to center.Edge DistanceIt is very important not to install the anchor any closer than 1-9/16" from an unsupported edge of the concrete.

Features & Highlights

  • VERSATILE - Can be installed in a wide variety of masonry, solid concrete, brick or block
  • 360 DEGREE EXPANSION - Provides consistent holding values in a wide range of base materials
  • PRE-ASSEMBLED - Ready to install no separate parts required
  • ALL STEEL PARTS - Heavy duty for the most demanding jobs
  • ANCHOR SIZE EQUALS HOLE SIZE - Easy to remember correct hole size for best results

Additional Information

Manufacturer:CONFAST
Brand:CONFAST
Part Number:SAHS516212
Publisher:CONFAST
Studio:CONFAST
MPN:SAHS516212
Package Weight:6.1 pounds
Package Size:4.5 x 3.5 x 3.5 inches

CONFAST 5/16'' x 2-1/2'' 304 Stainless Steel Hex Sleeve Anchor (100 per box) by CONFAST

Buy Now:
CONFAST 5/16" x 2-1/2" 304 Stainless Steel Hex Sleeve Anchor (100 per box)

Brand: CONFAST
4.0 out of 5 stars with 48 reviews
Condition: New
Lead Time: 1 - 2 Business Days
Availability: In Stock
$105.99


Quantity:  

 


View More In Sleeve Anchors.

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by CONFAST, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


CONFAST 5/8" x 3" 304 Stainless Steel Hex Sleeve Anchor (10 per box)
By CONFAST
mpn: SAHS583,
ApplicationsThe anchor is made from 304 Stainless Steel. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Wet environment.Head Style The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached.Hole Diameter/Bit DiameterThe anchor requires a 5/8'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI

Powers Fastening Innovations 05005S 5/16-Inch by 1-1/2-Inch Hex Head Lokbolt As All Steel Sleeve Anchor, 100 Per Box
By Powers Fastening Innovations
mpn: 05005S, ean: 0075352776897,
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.Pre-assembled single unit sleeve anchor available in carbon steel and stainless steel. Can be used in concrete block, brick and stone. 100 per box. Extension

Powers Fastening Innovations 05700S 5/16-Inch by 2-3/8-Inch Tie Wire Lokbolt As All Steel Sleeve Anchor, 100 Per Box
By Powers Fastening Innovations
mpn: 05700S, ean: 0075352778235,
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.Pre-assembled single unit sleeve anchor available in carbon steel and stainless steel. Can be used in concrete block, brick and stone. 100 per box. Extension

Hard-to-Find Fastener 014973243197 Flat Sleeve Anchors, 3/8 x 6, Piece-50
By Hard-to-Find Fastener
mpn: SAFS-019-50, ean: 0014973243197,
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get

1/4" x 3" Sleeve Anchors/Flat Head/Steel/Zinc (Carton: 100 pcs)
By Newport Fasteners
mpn: 827759, ean: 8945136177764,
Sleeve Anchors, 1/4'' x 3'' Sleeve Anchors / Flat Head / Steel / ZincFlat Head. Sleeve Anchors. A nut is tightened, sleeve dilates against substrate. For anchoring windows & doorframes. Threaded Bolt & Sleeve / All Steel Zinc Plate.

The Hillman Group 370808 Hex Head Sleeve Anchor, 1/2 X 4-Inch, 25-Pack
By The Hillman Group
mpn: 370808, ean: 0008236108347,
Concrete Sleeve Anchors' design allows them to anchor into concrete, brick and block. Turning the nut pulls the working end of the sleeve anchor up through the sleeve, expanding and anchoring itself securely in the concrete, brick or block.Expansion type anchors used to fasten fixture into a variety of base material. Pre-drilling required. Made of Steel/Zinc.

Simpson Strong Tie SL37178H 1/4-Inch by 1-3/8-Inch Sleeve-All Anchor with Acorn Head 3/16-Inch Bolt Diameter, 100 Per Box
By Simpson Strong-Tie
mpn: SL37178H, ean: 0044315808111,
Simpson Strong Tie Sleeve-All Anchors are pre-assembled expanding sleeve anchors for use in all types of solid base materials. These anchors are available in acorn, hex, rod coupler, flat or round head styles for a wide range of applications. These can be either zinc plated carbon or 304 stainless steel. Simpson has length identification marks on all Sleeve-All Anchors.Expanding Sleeve-All Anchors. Use in all types of solid base materials. Multiple head styles available.

Red Head SHN-1222 Dynabolt 303 Stainless Steel Heby Nut 1/2-Inch by 2-1/4-Inch Anchor (25 per Box)
By ITW Red Head
mpn: SHN-1222, ean: 0662520023688,
Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1/2 In., Anchor Length 2-1/4 In., Thread Size 3/8-16, Max. Work Thickness 3/8 In., Min. Embedment 1-7/8 In., Ultimate Shear in 4000 PSI Concrete (Lb.) 5000, Ultimate Tension in 4000 PSI Concrete (Lb.) 4400, Meets/Exceeds A-A-1923A, Package Quantity 25Anchor Diameter Equals Hole Diameter. Made from Stainless Steel. Heavy-Loading Capacity. Preassembled for Faster, Easier Installations. Sleeve Design Improves

CONFAST 3/8" x 4" Hex Sleeve Anchor Zinc Plated (50 per box)
By CONFAST
mpn: SAH384,
ApplicationsThe anchor is made from Carbon Steel, and is Zinc Plated. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Dry environment.Head Style The anchor is a Hex head and is designed to allow the head to sit on top of the surface of the item being attached.Hole Diameter/Bit DiameterThe anchor requires a 3/8'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit

Concrete Sleeve Anchors Zinc Alloy - 5/16 X 1-1/2 - Qty 100
By RAW PRODUCTS CORP
mpn: 046737824441, ean: 0046737824441,
Concrete Sleeve Anchors Zinc Alloy - 5/16 X 1-1/2 - Qty 100Concrete Sleeve Anchors are for use with concrete, brick or block.. These fasteners are used to install or fasten to concrete such as equipment, materials, generators, motors, pumps, pipes, strut, steel shapes, plastics or wood members..



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - inthenationalinterest.com. All Rights Reserved.