Login       My Wishlist
  My Cart
$0.00 / 0 items
 
In The National Interest
Politics and Policy in the Interest of the Nation
International Access
Global Shipping Options Available
Home   Our Catalog   Material Handling Products   Material Lifts

DAMO 10 inch Vacuum Concave Glass Suction Cup with ABS Handle and Hand Pump for Curved Glass lifting lifter


DAMO 10 inch Vacuum Concave Glass Suction Cup with ABS Handle and Hand Pump for Curved Glass lifting lifter by DAMO at In The National Interest. MPN: TCVSC10. Hurry! Limited time offer. Offer valid only while supplies last. Product DescriptionUse the cup on clean, relatively smooth, nonporous surfaces, at temperatures from 10 to 120 Fahrenheit . Moisture or contaminants


Product Description

Product Description

Use the cup on clean, relatively smooth, nonporous surfaces, at temperatures from 10 to 120 Fahrenheit . Moisture or contaminants can reduce the slip resistance of the cup. The red-line indicator may not perform reliably at elevations above 5000 feet.

To Attach
1) Position the hand cup on the contact surface so the red line will be visible if it should appear while lifting the load. CAUTION: Test the cup for staining or deformation of load surfaces with light colors or soft coatings.
2) Pump the plunger until the cup attaches completely. When the red line is hidden, vacuum is sufficient for lifting.
3) Check the plunger frequently to make sure the cup remains securely attached. If the red line appears while lifting, set down the load immediately and pump the plunger until the red line is hidden again.

To Release
1) Set the load on a secure support.
2) Press the valve release lever until the cup disengages completely.

Maintenance
Since aging and wear reduce the capacity of the rubber pad, it should be replaced at least once every 2 years or whenever cuts, slits or other surface damage is discovered. Always inspect vacuum pads before use. Clean vacuum pads and the load surface between each lift. Make sure both surfaces are dry and free of any dirt or obstruction. Make sure plunger has enough lubrication for pump.

Damo Diamond Tools, LLC is not responsible for any personal injuries and property damages due to incorrect usage of our products according to our Instructions.

We DAMO Diamond Tools, LLC holds exclusive distribution to DAMO Trademark products as you can see clearly marked from the picture on the product listing.

Features & Highlights

  • Load capacity: 200 lbs. per cup;Comes with a carrying case for free;
  • Fast attachment on curved surfaces such as auto wind shields;
  • Red-line indicator warns user of any vacuum loss;
  • Lift tab on pad edge permits instant release;
  • Check valve allows repumping without loss of remaining vacuum.

Additional Information

Manufacturer:DAMO Diamond Tools
Brand:DAMO
Part Number:TCVSC10
Publisher:DAMO Diamond Tools
Studio:DAMO Diamond Tools
MPN:TCVSC10
EAN:6946937103947
Item Weight:0.0242 pounds
Package Weight:2.4 pounds

DAMO 10 inch Vacuum Concave Glass Suction Cup with ABS Handle and Hand Pump for Curved Glass lifting lifter by DAMO

Buy Now:
DAMO 10 inch Vacuum Concave Glass Suction Cup with ABS Handle and Hand Pump for Curved Glass lifting lifter

Brand: DAMO
4.3 out of 5 stars with 203 reviews
Condition: New
Lead Time: 1 - 2 Business Days
Availability: In Stock
$78.90


Quantity:  

 


View More In Material Lifts.

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by DAMO, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


Vestil LLPW-500-FW Low Profile Lite Load Lift with Hand Winch, Steel, 29-13/16" Length, 30-1/2" Width, 66" Height, 500 lbs Capacity
By Vestil
mpn: LLPW-500-FW, ean: 0691215026987,
Vestil winch operated low profile lite load lift. Lift and transport loads from delivery trucks to docks or use to inventory items on storage systems. Easy to operate, lifts are available in steel construction. Units roll smoothly on 6-inches diamete...

CR-24, C5-RET-24 One Pallet (X15) of Return Idlers – 5” Diameter, 24 Inch Belt Width, 24 Lbs
By AIS Construction Equipment
mpn: CR-24_x15, ean: 0739992236653,
Fifteen (X15) New Return Rollers. Tech Info: 5" Diameter 24 Inch Belt Width Weight: 24 Pounds Per Part Dimensions: A= 27 Inches (686 mm) Replaces Part Numbers: C5-RET-24Tapered End Disc Allows External Seal and End Cap to Shed Material. Mater...

C20-36 C5-20E-36 One Pallet (X30) of Trougher Equal Idlers – 20 Degrees, 5” Diameter, 36” Belt Width
By AIS Construction Equipment
mpn: C20-36_x30, ean: 0739992236615,
Thirty (X30) New Trougher Equal Idlers. Tech Info: 20 Degrees 5" Diameter 36" Belt Width Idler Type: Trougher Equal Weight: 66 Pounds Per Part Material: Steel Dimensions: A= 45 In. B= 8-7/16 In. C= 13 In. D= 39-3/16 In. E= 5/16 In. F= 12-15/...

C5-35E-36, C35-36 - One Pallet (X30) of Trougher Equal Idlers – 35 Degrees, 5” Diameter, 36” Belt Width
By AIS Construction Equipment
mpn: C35-36_x30, ean: 0739992236578,
Thirty (X30) New Trougher Equal Idlers. Tech Info: 35 Degrees 5" Diameter 36" Belt Width Idler Type: Trougher Equal Weight: 658 Pounds Material: Steel Dimensions: A= 45 In. B= 8-7/16 In. C= 13 In. D= 35-3/8 In. E= 5/16 In. F= 16-1/16 In. G= ...

CR-30, C5-RET-30 One Pallet (X30) of Return Idlers – 5” Diameter, 30 Inch Belt Width
By AIS Construction Equipment
mpn: CR-30_x30, ean: 0739992236639,
Thirty (X30) New Return Idlers. Tech Info: 5" Diameter 30 Inch Belt Width Weight: 28 Pounds Per Part Dimensions: A= 33 Inches (838 mm) Replaces Part Numbers: CR-30 & C5-RET-30Tapered End Disc Allows External Seal and End Cap to Shed Material....

C5-20E-30, C20-30 One Pallet (X30) of Trougher Equal Idlers – 20 Degrees, 5” Diameter, 30” Belt Width
By AIS Construction Equipment
mpn: C20-30_x30, ean: 0739992236622,
Thirty (X30) New Trougher Equal Idlers. Tech Info: 20 Degrees 5" Diameter 30" Belt Width Idler Type: Trougher Equal Weight: 58 Pounds Per Part. Material: Steel Dimensions: A= 39 In. B= 8-7/16 In. C= 11 In. D= 33-7/16 In. E= 5/16 In. F= 12-5/...

C20-42, C5-20E-42 One Pallet (X15) of Trougher Equal Idlers – 20 Degrees, 5” Diameter, 42” Belt Width
By AIS Construction Equipment
mpn: C20-42_x15, ean: 0739992236646,
Fifteen (X15) New Trougher Equal Idlers. Tech Info: 20 Degrees 5" Diameter 42" Belt Width Idler Type: Trougher Equal Weight: 82 Pounds Per Part Material: Steel Dimensions: A= 51 In. B= 8-13/16 In. C= 15 In. D= 44-15/16 In. E= 5/16 In. F= 14-...

Drum Runner Model 4500A, Lifts and Moves Drums and Barrels, 1500lb Lift Capacity
By Drum Runner
mpn: 01-08002,
This ergonomic lift and transport unit features a narrow footprint to allow the user to take it through small isles and doorways. It features, oversized 8" phenolic casters for easy movement, wide handle for effortless maneuverability, patented clamp...

Drum Runner Model 4500P, Lifts and Moves Drums and Barrels Off a Pallet, 1500lb Lift Capacity,
By Drum Runner
mpn: 01-08001,
This ergonomic lift and transport unit allows the user to take drums on and off a pallet with ease. It features, oversized 8" phenolic casters for easy movement, wide handle for effortless maneuverability, patented clamp that can be used on 55 and 30...

Borroughs 2018-WB102-EC Workbench with Painted Top, 28 x 60 In, 2000 Pounds Load Capacity, 36" Height, 28" width, 60" Length, black
By Borroughs
mpn: 2018-WB102-EC, ean: 0816297021440,
Borroughs has a long history of making the best shop equipment in the industry. The work Bench top is 60 in x 28 in and constructed with heavy 12 gauge steel, designed for durability. Our wb102-protect comes with a large black painted steel top that ...

Scroll to Top


Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - inthenationalinterest.com. All Rights Reserved.