Dormer E651 High-Speed Steel Combined Drill and Tap, Black Oxide Finish, Round Shank With Square End, Modified Bottoming Chamfer, 3/8"-16 Thread Size
Huge Savings Item! Free Shipping Included! Save 13% on the Dormer E651 High-Speed Steel Combined Drill and Tap, Black Oxide Finish, Round Shank With Square End, Modified Bottoming Chamfer, 3/8''-16 Thread Size by Dormer at In The National Interest. MPN: E6513/8. Hurry! Limited time offer. Offer valid only while supplies last. The Dormer E651 high-speed steel spiral flute tap and drill combination has a round shank with a square end, a black oxide finish, and a modified
The Dormer E651 high-speed steel spiral flute tap and drill combination has a round shank with a square end, a black oxide finish, and a modified bottoming chamfer, and is used to drill holes and create UNC (Unified Coarse) right-hand threads in a range of materials. The tool drills and threads holes in one operation. Its 30-degree spiral flutes pull chips back from the tip of the tool, up and out of the hole to prevent clogging and is suitable for use in through-holes (extending through the workpiece). Its black oxide finish improves lubricity, resists corrosion, and will not chip or flake. Black oxide also helps to prevent buildup and welding of material on the tap’s cutting edge when working with iron and steel. The modified bottoming chamfer has additional length to reduce chip load, add tool life in difficult-to-machine materials, and permit higher tapping speeds.
Right-hand threads are designed to tighten when a head or nut is rotated clockwise (the most common threading direction). High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. The round shank with square end helps to minimize rotation in the tool holder. This tool can be used in machines, such as drill presses or lathes, or with hand tools such as tap wrenches.
In the Dormer E651 series all tools have two flutes and modified bottoming chamfers. This tool conforms to Dormer DIN standards and can drill and create threads to a depth one-and-a-half times its diameter. It is suitable for the ANSI 2B tolerance class: 2B is an average quality fit for commercial and industrial fasteners.
Combination drill and tap tools are designed to create holes and cut threads in one pass. Taps produce internal threads in previously formed holes and can be used in machines (such as drill presses) or with hand tools. Common types of taps include hand taps, spiral point taps, spiral flute taps, thread forming taps, and pipe taps. Hand taps (straight-flute taps) collect chips in the straight flutes of the tool; spiral point taps push chips through holes ahead of the tool; and spiral flute taps pull chips back from the tip of the tool, up and out the hole. Thread forming taps, also known as cold forming taps, press rather than cut to create threads in a drilled hole, and no chips are created. Pipe taps create threads in pipes and pipe fittings. Each thread type designates a thread profile and each type is identified with an abbreviation. In the U.S. and Canada, the Unified Thread Standard is the dominant thread type, including UNC (Unified Coarse), UNF (Unified Fine), and NPT (National Pipe Taper) threads, among others.
Dormer Pramet manufactures cutting tools under the following brands: Precision Twist Drill, Dormer, Union Butterfield and Pramet. The company has locations around the world, and provides tools adhering to ANSI, NAS, and DIN standards.
Features & Highlights
- Combination drill and tap creates holes and cuts threads in one operation for efficient tooling
- Spiral flutes pull chips back from the tip of the tool and out of the hole to prevent clogging
- For creating and threading through holes
- Black oxide finish improves lubricity, resists corrosion, and helps prevent buildup
- Modified bottoming chamfer has additional length to reduce chip load, add tool life, and permit higher tapping speeds
|Item Weight:||0.11 pounds|
|Package Weight:||0.1 pounds|
|Package Size:||0.5 x 0.4 x 0.4 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Dormer, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Material : High Speed Steel Shank : 1/4 IN Quick Change Hex Metric 6PC:M3 M4 M5 M8 M6 M10 Suitable for soft metal tapping, such as aluminum plate, 3-4mm thickness. The advantage is opening, tapping, chamfering. Package Included: 6pcs Metric Dril...
mpn: 3138, ean: 0718117677564,
Please visit the TEMO Store Front at:www.amazon.com/temoTEMO is a registered trademark of Golden Coulee, LLC and Golden Coulee is the sole authorized seller of TEMO brand products. Counterfeit products may be unsafe, not made to the correct safety st...
mpn: 1050-346, ean: 0787392585864,
A product proudly made in the USA by Norseman Viking. This 18 Piece Drill and Tap set saves time, money and effort! Time is money. By matching the tap with the appropriate drill bit, Norseman has cut out the guess work. Now you do not need a drill ch...
By Union Butterfield
mpn: 19941/4X20, ean: 0698464037580,
Combination drill and tap creates holes and cuts threads in one operation for efficient tooling. Spiral flute tap design pulls chips back from the tip of the tool and out of the hole to prevent clogging. Designed for creating and threading through ho...
mpn: H1-WJ-79, ean: 0767578753768,
Description: 1.Suitable for soft metal tapping, such as aluminum plate, thickness of less than 3--4mm. 2.Use for hole punching,tapping,chamfering. 3.SAE Size:6-32NC (3.5mm),8-32NC( 4.2mm),10-32NC( 5mm),10-24NC ( 5mm),12-24NC( 5.7mm),1/4-20NC( 6.35mm)...
By Sandvik Coromant
PART NO. DGI-SVK31721 R790-220520PH-NM H13A Sandvik, CoroMill 790 Insert for Milling. CoroMill inserts are optimized for a material group and type of operation. Correctly applied and with optimized cutting data the productivity improvement is far bey...
PART NO. MBH357464 #25 Size, MWS Series, Solid Carbide Internal Coolant Drill, 30XD, ALTiN Coating, Mitsubishi MWS01495X30DB. MIRACLE® coated VP15TF is ideal for drilling due to its high resistance to chip welding. Suitable for machining a wide rang...
By Sandvik Coromant
PART NO. SVK71820 12.7mm CoroDrill 860 Solid Carbide Drill, Coolant-Thru, 38.8m LOC. CoroDrill® 860 is a solid carbide drill designed for a fast and problem-free drilling. It maximizes productivity through high metal cutting efficiency and machine u...
By KEO Cutters
mpn: NA, ean: 7437843165109,
This cobalt drill is designed for producing protected center holes in components or workpieces that require machining between centers. It offers good rigidity and wear resistance, and allows users to drill and countersink in one step. Use for machini...
By Sandvik Coromant
PART NO. DGI-SVK76445 870-1429-14-MM 2234, 14.29mm, CoroDrill 870 Drill Tip. GC2234 includes a fine-grained high-chromium substrate and a new PVD coating with optimized composition for ISO M drilling. The thin AlTiN PVD coating includes enhanced adhe...