Electronics-Salon DB37 D-SUB DIN Rail Mount Interface Module, Male / Female, DSUB Breakout Board.
Huge Savings Item! Save 11% on the Electronics-Salon DB37 D-SUB DIN Rail Mount Interface Module, Male / Female, DSUB Breakout Board. by Electronics-Salon at In The National Interest. MPN: MD-D208T-1. Hurry! Limited time offer. Offer valid only while supplies last. Din Rail Mount DB37 Interface Module. Male and Female DB37 connectors. Screw terminal block. Din rail mountable - for width 35 / 32 / 15mm rails.
Din Rail Mount DB37 Interface Module.
Male and Female DB37 connectors.
Screw terminal block.
Din rail mountable - for width 35 / 32 / 15mm rails.
High quality PCB carrier.
FR-4 fiber glass PCB.
External dimensions: 87 x 80 x 43mm(W x L x H).
PCB dimensions: 72 x 77.35mm(W x L).
100% new, never used.
Terminal block specifications:
Pitch - 3.81mm.
Rated voltage - 150V.
Rated current - 10A.
Wire range - 26-16AWG.
Strip length - 5mm.
Screws - M2,steel,Cr3+ Zn plated.
Torque - 0.2Nm (1.7Lb-In.).
Pin header and Cage - Brass.
Features & Highlights
- Din Rail Mount DB37 Interface Module.
- Male and Female DB37 connectors. Screw terminal block.
- Din rail mountable - for width 35 / 32 / 15mm rails.
- High quality PCB carrier. FR-4 fiber glass PCB.
- External dimensions: 87 x 80 x 43mm(W x L x H). PCB dimensions: 72 x 77.35mm(W x L).
|Package Weight:||0.26 pounds|
|Package Size:||3.7 x 2.1 x 2.1 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Electronics-Salon, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 1, ean: 0701017970392,
16-bit remote bidirectional I/O port - I/O pins default to input - High-speed I2C interface (MCP23017) - 100 kHz - 400 kHz - 1.7 MHz - High-speed SPI interface (MCP23S17) - 10 MHz (max.) - Three hardware address pins to allow up to eight devices on t...
By Opto 22
The SNAP-AIMA-4 provides four channels of -20 mA to +20 mA analog current input. The module does not supply loop excitation current. Although the four channels are not isolated from each other, the module is transformer isolated and optically isolate...
Brentek's G-WDT5 Watchdog Timer Module monitors a control system's activity by detecting on/off transitions of a control line. During normal system operation, the watchdog's internal timer is continually reset by control line activity and its dry-...
By Automation Systems Interconnect
mpn: ASI451119, ean: 0813101026264,
The ASI451119 is a DIN rail mounted analog signal isolator transmitter for standard 4-20mA control circuits that provides electrical isolation between the input, output and power circuits. The analog signal isolator can be mounted directly in the con...
By Optimus Electric
mpn: EAN0616639915518, ean: 0616639915518,
This is an UNO development board compatible with Arduino with ATmega328P microcontroller. The integrated circuit of this board is programmed by CH340. Technical Specifications •Voltage: 5V Supply voltage: 7 V to 12 V; •I / O pins: 14; PWM pin ...
By Opto 22
Opto 22’s G4 AC output modules are used to control or switch AC loads. Each module provides up to 4000 volts of optical isolation (transient) between field outputs and the control side of the circuit, and each features zero voltage turn-on and zero...
DIN Rail Mount 20-pin 0.05" Mini D Ribbon / MDR Female Interface Module. This item has been assembled and electrical test passed. 20-pin pitch 1.27mm/0.05" Mini D Ribbon / MDR female connector. 20-position pitch 3.81mm/0.15" screw terminal blocks. ...
By ICP DAS
Tiny Serial Port Sharing Device with 1 RS-485 port and 2 (3-wire) RS-232 ports. Supports PoE, Modbus RTU/ASCII protocol conversion, Two Masters on One Slave Port, Automatic RS-232 Directional Control, has low Power Consumption and DIN Rail Mount. Sup...
By ICP DAS
Universal IR Infrared Learning Remote Module to Modbus RTU converter (2 IR outputs, 224 IR Cmds), with 2 CA-IR-SH2251 & 1 CA-0910, communicable over RS-485 and RS-232, supports operating temperature from -25C ~ +75C (-13F ~ 167F). IR-712A is a univer...