Enerpac RC-101 Single-Acting Alloy Steel Hydraulic Cylinder with 10 Ton Capacity, Single Port, 1" Stroke
Huge Savings Item! Save 13% on the Enerpac RC-101 Single-Acting Alloy Steel Hydraulic Cylinder with 10 Ton Capacity, Single Port, 1'' Stroke by Enerpac at In The National Interest. MPN: RC101. Hurry! Limited time offer. Offer valid only while supplies last. This Enerpac RC-101 single-acting alloy steel hydraulic cylinder with 10-ton capacity has a round body with one port and spring-return of the single
This Enerpac RC-101 single-acting alloy steel hydraulic cylinder with 10-ton capacity has a round body with one port and spring-return of the single piston rod with 1" stroke for use in general-purpose applications in any position. The single-acting hydraulic cylinder uses liquid pumped through its single port for rod extension and a pretensioned internal spring for expedited rod retraction to produce continued movement. A built-in stop ring prevents the plunger from extending beyond the stroke length, assists in absorbing side loads, and can endure the full capacity of the cylinder. The plunger wiper helps inhibit contamination in the cylinder, and the removable grooved plunger saddle covers the plunger mounting threads and protects the plunger during lifting operations. The GR2 bearings reduce wear and help prevent jamming and rod over-extension by absorbing eccentric load stresses. The port is a quick-connect CR-400 female coupler for use with a CH-604 male coupler (sold separately), and the included dust cap covers the port when not in use. The high-strength alloy steel body has a baked enamel finish for corrosion resistance in harsh environments.
|Cylinder capacity||10 tons (11.2 maximum)|
|Stroke length||1.00 inches|
|Effective area||2.24 square inches|
|Oil capacity||2.24 cubic inches|
|Cylinder bore diameter||1.69 inches|
|Collapsed height||3.53 inches|
|Extended height||4.53 inches|
|Outside diameter||2.25 inches|
Enerpac manufactures high-pressure tools and equipment for industrial applications. The company, founded in 1910, is headquartered in Menomonee Falls, WI.
Features & Highlights
- Single-acting hydraulic cylinder with one port and pretensioned spring return of piston rod after 1" stroke
- Round body with single piston rod for use in general purpose applications in any position
- High-strength alloy steel with baked enamel finish for corrosion resistance
- 10-ton cylinder capacity for lifting or pushing
- Quick-connect CR-400 female coupler for connection to a CH-604 male coupler (sold separately)
|Item Weight:||4 pounds|
|Item Size:||4.6 x 4.6 x 4.6 inches|
|Package Weight:||4.7 pounds|
|Package Size:||8.5 x 5.5 x 5.5 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Enerpac, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By SPX POWER TEAM
mpn: 9005A, ean: 0662536181181,
Ideal for use in any number of industrial lifting and pushing applications. Serrated or contoured saddles help stabilize the load for a safer lift.Used for Industrial Lifting and Pushing Applications. Many jacks feature screw extensions. Can be used ...
mpn: HY 6356024,
Hydra Force Coil 3 Prong DIN 24 Volt DC Fits 10, 12, 16, 38 and 58 series Hydraforce Stems (1/2" Hole)Hydra Force Coil 3 Prong DIN 24 Volt DC Fits 10, 12, 16, 38 and 58 series Hydraforce Stems (5/8" Hole). ...
mpn: HY 6351024 DS 24 VDC,
Hydra Force Coil 2 Spade 24 Volt DC Fits 10, 12, 16, 38 and 58 series Hydraforce Stems (1/2" Hole)Hydra Force Coil 2 Spade 24 Volt DC Fits 10, 12, 16, 38 and 58 series Hydraforce Stems (5/8" Hole). ...
By M&H Global
mpn: Does Not Apply, ean: 0745313392885,
Hydraulic Flat Jack Cylinder. Cylinder Capacity: 10 ton. Stroke: 0.43" (11mm). Weight: 3.6 lbs. Quantity: 1. ...
mpn: 6C05T01, ean: 0662459922601,
The Williams Hydraulics 6C05T01 5 Ton Single Acting Cylinder 1 inch features internal plunger threads, snap in grooved saddles, rod wipers that seal out dirt and contamination, collar fixture threads, two base mounting holes, high strength steel cons...
mpn: 6C10T08, ean: 0662459922717,
The Williams Hydraulics 6C10T08 10 Ton Single Acting Cylinder 8 inch features internal plunger threads, snap in grooved saddles, rod wipers that seal out dirt and contamination, collar fixture threads, two base mounting holes, high strength steel con...
mpn: R55, ean: 0812761020674,
Simplex R55, Single Acting, Spring Return Steel Cylinder, 5 Ton Capacity with 5.13" Stroke, 10,000 psi Operating Pressure is an industry standard, general purpose cylinder that can be used in any position and is an excellent choice for maintenance li...
mpn: R108, ean: 0812761020742,
Simplex R108, Single Acting, Spring Return Steel Cylinder, 10 Ton Capacity with 8" Stroke, 8,929 psi Operating Pressure is an industry standard, general purpose cylinder that can be used in any position and is an excellent choice for maintenance lift...
mpn: S2000A, ean: 0812761021022,
Simplex S2000A Hydraulic Spreader, 1 Ton Capacity with 3.70" travel is ideal for breaking away concrete forms, straightening rebar, bending, clamping or lifting and positioning. Includes high flow coupler for fast tool setup and return spring to assi...
mpn: RR1010, ean: 0662005303298,
This Enerpac RR-1010 double-acting hydraulic cylinder with 10-ton capacity and 10.00" stroke has been precision designed for use in high-cycle industrial linear applications. The double-acting hydraulic cylinder uses liquid pumped through two ports o...