Extension Drill, Coolant Fed, 6mm, EXO
Extension Drill, Coolant Fed, 6mm, EXO by Osg at In The National Interest. MPN: 8648600. Hurry! Limited time offer. Offer valid only while supplies last. High performance grade, coolant fed type extension drill is made of solid carbide with EXO(r) finish, notched point type, drill point (degree) 140,
High performance grade, coolant fed type extension drill is made of solid carbide with EXO(r) finish, notched point type, drill point (degree) 140, metric size 6.00, decimal equivalent 0.2362, flute length 200 mm, overall length 250 mm, shank diameter 6 mm, for deeper hole drilling and high penetration rates in cast aluminum, cast iron, carbon steel, alloy die steel, stainless steel and high heat alloys.
Features & Highlights
- Non-peck drilling is feasible
- Solid carbide resists wear better than high-speed or cobalt steel
- Proprietary nano coating increases heat and wear resistance
|Manufacturer:||OSG Tap And Die|
|Publisher:||OSG Tap And Die|
|Studio:||OSG Tap And Die|
|Item Weight:||0.14 pounds|
|Package Weight:||1.14 pounds|
|Package Size:||5 x 5 x 5 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Osg, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Master Stages
mpn: CLEAN2029/54, ean: 0641238002116,
Master STAGES clean 2029 'one step' is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two-to-four weeks of indoor corrosion inhibition on steel and ...
mpn: 332-463-Q, ean: 0783310282389,
332-463-Q Features: -Premium quality, high lubricity for easier cutting and long tool life. -Unit Sold is in measure of 1 Case. Product Type: -Metal Cutting Fluid. Dimensions: Overall Product Weight: -2.12 Pounds....
NACHI Taper Shank Regular Length Coolant Fed Twist Drills - Tool Material: Cobalt Size: 1-3/8" Drill Point Angle: 118 Degrees Drill Type: Coolant Fed Flute Length: 8-7/8"Right hand (clockwise rotation) cutting direction.. Made with two holes through ...
NACHI Straight Shank Taper Length Coolant Fed Twist Drills - Tool Material: M35 Cobalt Size: 1-7/16" Drill Point Angle: 118 Degrees Drill Type: Coolant Fed Flute Length: 9-5/8"Right hand (clockwise rotation) cutting direction.. Made with two holes th...
mpn: TC239/5, ean: 0641238028857,
TRIM TC 239 is a paintable, platable additive used to control foam in metalworking fluids and parts washing systems..Spraying premixed TC 239 directly onto the foam will knock it down quickly. Using too much TC 239 can cause increased foam and/or for...
mpn: TC177/5, ean: 0641238010234,
TRIM TC 177 is a "vanilla" odor mask. This product may be used to reduce some of the odors associated with coolant systems..Odor mask. Vanilla. Product may be used to reduce some of the odors associated with coolant systems. ...
mpn: SD180/1.25x5, ean: 0731325560466,
Edwards Square Tube Die 1-1/4" x 5" 180 (SD180/1.25x5)...
mpn: TD180/1.25X6.5, ean: 0731325561340,
Edwards Tube Die 1-1/4" x 6-1/2" 180 (TD180/1.25X6.5)...
mpn: SD180/1X6.5, ean: 0731325560633,
Edwards Square Tube Die 1" x 6-1/2" 180 (SD180/1X6.5)...
mpn: SD180/1.25X5.5, ean: 0731325560473,
Edwards Square Tube Die 1-1/4" x 5-1/2" 180 (SD180/1.25X5.5)...