Fibaro RGBW Micro Controller Z-wave, Works with RGB/RGBW LED Strips
Free Shipping Included! Fibaro RGBW Micro Controller Z-wave, Works with RGB/RGBW LED Strips by Fibaro at In The National Interest. MPN: FGRGBW-101. Hurry! Limited time offer. Offer valid only while supplies last. The FIBARO RGBW Controller is a universal, Z Wave compatible RGB/RGBW controller. The RGBW Controller uses a PWM output signal, which enables it to
The FIBARO RGBW Controller is a universal, Z Wave compatible RGB/RGBW controller. The RGBW Controller uses a PWM output signal, which enables it to control LED, RGB, RGBW strips, halogen lights and fans. Controlled devices may be powered by 12 or 24 VDC. Additionally, the device supports up to four 0V 10V analog sensors such as temperature sensors, humidity sensors, wind sensors, air quality sensors, and light sensors. All IN and OUT terminals may be user configured for LED control or 0V 10V signal readouts.
The RGBW Controller allows you to manage and monitor energy consumption connected to the LED strips. Four channels allow for total or independent measurements of energy consumption. When connected with the Home Center 2 you can check the live realtime power consumption and review usage history.
You can upgrade the device wirelessly using the Home Center 2 any time new firmware is available.You don't have to disconnect it from a wall socket and waste valuable time connecting it to a computer. Just press the update button and enjoy the comfort of your home
WARNING: Fibaro RGBW Controller is dedicated to operate in low voltage circuits of 12VDC or 24VDC. Connecting higher voltage load may result in Fibaro RGBW Controller damage. Fibaro RGBW Controller must be powered by the same voltage as the connected light source. I.e. if controlling 12V LED strip, the module must be connected to 12V power supply. Similarly, if controlling 24V RGBW strip, Fibaro RGBW Controller must be powered by 24V voltage supply.
Features & Highlights
- Fibaro RGBW Controller controls three as well as four color LED strips giving you millions of colors of light and smart lighting capabilities.
- Fibaro RGBW Controller has four analog inputs supporting any sensors, e.g. lightsensors, wind sensors, pressure sensors and potentiometers operating within 0-10V range.
- Four output channels allow for connecting and independently controlling each of connected light sources.
- Four channels allow for total or independent measurements of energy consumption.When connected to your smart hub you can check the live real-time power consumptionand review usage history.
- Z-Wave Certified Device: Cert ID: ZC08-14070003/ Frequency Region: U.S./Canada/Mexico, Z-Wave Library Version: 4.55.00
|Item Size:||1.5 x 0.6 x 0.6 inches|
|Package Weight:||0.09 pounds|
|Package Size:||2.56 x 1.73 x 1.73 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Fibaro, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Lighthouse LEDs
Our pre-wired LEDs are nothing but quality. The 9v 3mm pure green led puts out a nice color that is sure the illuminate your product or project. Our 3mm pre-wired leds have built in resistors so that they will work with the voltage that they are rate...
By Lighthouse LEDs
Our pre-wired Flickering LEDs are nothing but quality. The 12v 5mm Warm / clear white led puts out a nice color that is sure the illuminate your product or project. Our 5mm pre-wired leds have built in resistors so that they will work with the voltag...
By MACROMATIC CONTROLS
TIME DELAY RELAY; Contact Voltage VDC:-; Time Min:0.05s; Time Max:100h; Product Range:TAA Series; Contact Configuration:DPDT; Contact Current:3A; Relay Mounting:Quick Connect; Contact Voltage VAC:240V; Nom Input Voltage:240V ;RoHS Compliant: Yes...
mpn: CRESCENT ENTERPRISES-267, ean: 0700253565171,
Bring a little bit of Times Square into your home with this sweet 32 x 32 square RGB LED matrix panel. These panels are normally used to make video walls on the sides of busses and bus stops, to display animations or short video clips. They have 1024...
By Lighthouse LEDs
Technical SpecificationsWavelength: RGB (Red/Green/Blue)Lens Color: Water ClearView Angle: 25 DegreesForward Voltage: RGB 3.2-3.6vCurrent: 20-25mASize: 5mm Piranha Super FluxLuminosity: 10,000 mcdAn led that has three different colors in one led bulb...
By National Semiconductor
PC board mounted, magnified, monolithic display intended for small, low cost numeric indication. Number of digits: 6. Digit height: 0.100 inch. Lens/magnification: clear, bubble 2X.Number of digits: 6. Digit height: 0.100 inch. Lens/magnification: cl...
Specifications: Display Size: 2.42" Text Color: Yellow, Blue, White, Green(Optional) Resolution: 128x64 Driver IC: SSD1309 Serial Peripheral Interface Pins: 1.GND(Power Supply Ground) 2.VCC(Power Supply Positive) 3.SCL(Clock Line) 4.SDA(Data Line) ...
mpn: 1, ean: 0722204890217,
Why You Need It£¿ 7 inch 800*480 Multicolor Graphic LCD, with resistive touch screen, offers you a great eyes view and use feeling. It is embedded geometric speed-up engine, and has programmable font write cursor. SPECIFICATIONS -LCD Type: TFT -Int...
Our aim is creating trendy and very unique spa accessories and pool accessories We do modifications testing trying to find a factory and a design that could be aesthetic Our backpack will be ideal from all with renewable durable and extremely strong ...
By REDINGTON COUNTERS
REDINGTON COUNTERS P2-4816 ELECTROMECHANICAL TOTALIZING COUNTERPrice For: Each No. of Digits / Alpha: 6 Digit Height: 4.3mm Supply Voltage Range: 115V AC Power Consumption: 3.5W Panel Cutout Height: 26.67mm Panel Cutout Width: 43.69mm Character Size:...