Filabot Assembled Wee Filament Extruder (USA Version), ABS/PLA, 1.75 mm/3 mm Diameter
On Sale Now! Free Shipping Included! Save 6% on the Filabot Assembled Wee Filament Extruder (USA Version), ABS/PLA, 1.75 mm/3 mm Diameter by Filabot at In The National Interest. MPN: 1-2K. Hurry! Limited time offer. Offer valid only while supplies last. The Filabot Wee fully assembled filament extruder fabricates 1.75 mm or 3 mm diameter plastic filament for use in a 3D printer from ABS
The Filabot Wee fully assembled filament extruder fabricates 1.75 mm or 3 mm diameter plastic filament for use in a 3D printer from ABS (acrylonitrile butadiene styrene) or PLA (polylactic acid) thermoplastic pellets or reclaimed shavings. The enclosure is made of 1/2"plywood, has three rocker switches for power, extruder feed motor, and heater, and a controller with LCD display to set and maintain a steady heater temperature from 40 to 350 degrees C. A sheet metal hopper holds pellets and optional colorant, or shavings, for feeding through the extruder, at rates from 5 to 20 inches/minute (13 to 51 cm/minute), depending on the type of plastic and diameter extruded. The unit comes with two interchangeable brass nozzles to extrude either 1.75mm or 3 mm diameter filament. The extruder includes 1 lb of white ABS plastic pellets.
|Input material||ABS, PLA|
|Filament diameter output||1.75 or 3 mm|
|Temperature settings||40 to 350 degrees C|
|Extrude rate||5 to 20 inches/minute (13 to 51 cm/minute)|
|Feed screw speed||35 rpm|
|Input power||120 VAC and 220 VAC|
|Power draw||300 Watts|
|Overall dimensions||8 x 17 x 7 inches (H x W x D)*|
*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Filabot manufactures recycled material filament and filament-making machines for 3D printers. The company, founded in 2012, is headquartered in Milton, VT.
What's in the Box?
- Filabot Wee Filament Extruder
- Power cord
- 1 lb of white ABS plastic pellets
Features & Highlights
- Assembled extruder fabricates plastic filament for use in a 3D printer
- Uses ABS or PLA plastic pellets, or reclaimed shavings
- Interchangeable nozzles extrude 1.75 mm or 3 mm diameter filament
- LCD controller maintains heater temperature from 40 to 350 degrees C
- Extrudes filament at rates from 5 to 20 inches/minute (13 to 51 cm/minute)
|Package Weight:||24 pounds|
|Package Size:||12.5 x 12.5 x 12.5 inches|