The general purpose ultrasonic level transmitter provides continuous level measurement up to 18.0’ (5.5m) with a 4-20 mA signal output, and is configured via our free Webcal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for day tank, skid, IBC, sump and process tank level applications. Range: 18.0' (5.5m). Accuracy: +/- 0.2 percent of range. Resolution: 0.079" (2mm). Dead band: 8" (20cm). Beam width: 3" (7.6cm). Configuration: WebCal PC Windows USB 2.0. Memory: Non-volatile. Supply voltage: 24 VDC (loop). Consumption: 0.5W. Loop resistance: 400O maximum. Signal output: 4-20 mA, two-wire. Signal invert: 4-20 mA or 20-4 mA. Signal fail-safe: 4 mA, 20 mA, 21 mA,22 mA or hold last. Contact type: (4) SPST relays. Contact rating: 60 VA, 1A maximum. Contact fail-safe: Power loss: Hold last: Echo loss: Open, closeor hold last. Hysteresis: Selectable. Process temperature: F: 20 to 140 degree, C: -7 to 60 degree. Temperature comp: Automatic. Ambient temperature: -31 to 140 degree F, -35 to 60 degree C. Pressure: MWP = 30 PSI (2 bar). Enclosure rating: Type 6P, encapsulated, corrosion resistant and submersible. Enclosure material: Polycarbonate. Trans. material: PVDF. Cable jacket mat: Polyurethane. Cable type: 9-conductor, shielded. Cable length: 48" (1.2m). Process mount: 1" NPT. Mount gasket: Viton. Classification: General purpose. Compliance: CE, RoHS. Approvals: cFMus.
Features & Highlights
- Switch and control functions with continuous level measurement output up to 18.0' (5.5m)
- Configuration is fast and easy via WebCal software and USB adapter
- Narrow 3" beam width and short 8" dead band optimized for small tanks
- PVDF transducer and 6P polycarbon ate enclosure for corrosive liquids
- Automatic temperature compensation for accurate measurement
|Item Size:||6.6 x 5.3 x 5.3 inches|
|Package Weight:||1.8 pounds|
|Package Size:||6.6 x 5.4 x 5.4 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Flowline, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
The general purpose ultrasonic level sensor provides continuous level detection up to 26.2' with 3 programmable relays for level switch or level control functions, and is configured via the integral push button display module. Each relay can be confi...
CSA approved intrinsically safe for use in hazardous locations, the two-wire ultrasonic transmitter provides non-contact level measurement up to 18', and is ideally suited for challenging corrosive, slurry or waste liquids. Push button calibrated, th...