Fluke I30S AC/DC Current Clamp, 300V AC/DC Voltage, 30A DC, 20A AC rms Current
Huge Savings Item! Free Shipping Included! Save 11% on the Fluke I30S AC/DC Current Clamp, 300V AC/DC Voltage, 30A DC, 20A AC rms Current by Fluke at In The National Interest. SKU: I30S. MPN: I30S. Hurry! Limited time offer. Offer valid only while supplies last. The i30s current clamp is based on hall effect technology for use in measurement of both DC and AC current. The i30s may be used in conjunction with
The i30s current clamp is based on hall effect technology for use in measurement of both DC and AC current. The i30s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement. Specified current range: 30 mA to 30A DC, 30 mA to 20 A AC rms. Usable current range: 5 mA to 30 A DC, 30 mA to 20 A AC rms. Crest factor: 1.4". Output sensitivity: 100 mV/A. Accuracy (at +25 degree C): +/-1 percent of reading +/-2 mA. Resolution: +/-1 mA. Load impedance: greater than 100 kilo ohm. Conductor position sensitivity: +/-1 percent relative to center reading. Frequency range: DC to 100 kHz (- 0.5 dB). Phase shift below 1 kHz: less than 2 degrees. Temperature coefficient: +/-0.01 percent of reading/degree C. Power supply: 9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator. Working voltage (see Safety Standards section): 300 V AC rms or DC. Maximum conductor size: 19mm diameter. Output connection: Safety BNC connector, supplied with safety 4mm adapter. Output zero: Manual adjust via thumbwheel. Cable length: 2 meters. Operating temperature range: 0 to +50 degree C. Storage temperature range (with battery removed): -20 to +85 degree C. Operating humidity: 15 to 85 percent (non-condensing). Safety standards: BS EN 61010-1: 2001, BS EN 61010-2-032: 2002, BS EN 61010-031: 2002, 300 Vrms, Category III, Pollution Degree 2, Use of the probe on uninsulated conductors is limited to 300 V AC RMS or dc and frequencies below 1 kHz. EMC Standards: EN 61326: 1998 +A1, A2, and A3. Measures 71mm width by 183mm height by 25mm depth.
Features & Highlights
- Current clamp is based on hall effect technology
- Use in measurement of both DC and AC current
- it may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement
- 1.4" Crest factor
- 100 mV/A output sensitivity
|Item Weight:||6.61 pounds|
|Item Size:||4.3 x 1.5 x 1.5 inches|
|Package Weight:||0.88 pounds|
|Package Size:||4.3 x 1.5 x 1.5 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Fluke, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
sku: 80I110S, mpn: 80I-110S, ean: 0095969040549,
The 80I-110s is compatible with any fluke ScopeMeter test tool, power harmonics analyzer, oscilloscope, multimeter. It also compitable with other voltage measurement device with BNC input connectors or if using a meter convert the banana plugs to a B...
The SERIES 490A Digital Manometers are versatile, hand-held, battery operated manometers available in several basic ranges for positive or positive differential pressure measurement and can tolerate most liquid media compatible with 316LSS. A new fea...
sku: Fluke-922, mpn: FLUKE-922, ean: 0520361366886,
Fluke 922 was designed and built for how (and where) you do your job, with performance, ruggedness and ease of use, setting the Fluke 922 apart from the competition. The bright white display and ruggedized holster and wrist strap let you take the Flu...
mpn: KEST-0857ALBLZ, ean: 0730650002962,
KESTREL 5700 ELITE METER WITH APPLIED BALLISTICS The Kestrel Elite combines sophisticated environmental sensing features with long-range shooting ballistics information in one powerful hand-held device, delivering proven elevation and windage solutio...