Gizmo Dorks Kapton Tape (Polyimide) for 3D Printers and Printing, 12 x 12 inches, 10 sheets per pack
Gizmo Dorks Kapton Tape (Polyimide) for 3D Printers and Printing, 12 x 12 inches, 10 sheets per pack by Gizmo Dorks at In The National Interest. MPN: 43237-2. Hurry! Limited time offer. Offer valid only while supplies last. Kapton tape is the perfect accessory to cover your build platform during a 3D print. Kapton tape is made from a thin layer, 1 mil thick, of Polyimide
Kapton tape is the perfect accessory to cover your build platform during a 3D print. Kapton tape is made from a thin layer, 1 mil thick, of Polyimide film. The tape also has a 1 mil thick layer of silicone adhesive. Kapton tape is widely used because of it's ability to withstand the heating and cooling of a build platform. Certain plastics such as ABS filament adhere particularly well to Kapton tape making it perfect to use when a heated build platform is required. ABS filament will have full adhesion to the Kapton tape at the high build plate temperature required, but it will also release the printed part when the bed cools. The print will be easy to peel or pop right off making Kapton tape the practical choice for any 3D printer build plate.
- Dimensions: 12 inches wide by 12 inches wide
- 1 mil thick Kapton layer
- 1 mil thick silicone adhesive layer
- 2 mil total thickness
- Comes in a pack of 10 sheets
- Each sheet comes on a removable protective liner
- The tape can be cut down easily to fit any size shape
- Other sizes ranging from 6 to 12 inch widths are available
The dry method involves using a flat edge such as a ruler or a credit card to slowly peel and apply the tape while using the straight edge to keep the tape free from bubbles.
The wet method is similar to the dry method but involves spraying some soapy water underneath the Kapton tape. Remove the liquid by squeegee or a straight flat edge such as a ruler. This will also remove any air bubbles. The biggest benefit to the wet method is that you can re-position the tape while it is wet because the liquid allows you to easily slide the tape around. Let the Kapton tape fully dry before printing.
Features & Highlights
- Superior quality Kapton polyimide tape for 3D printing
- Resistant to high temperatures making it perfect for plastic filaments requiring heated build beds such as ABS
- 3D prints adhere very well especially under high heat but release cleanly when cooled
- Great durability for multiple print cycles without needing to change the tape
- Dimensions of 12 x 12 inches, can be cut to size easily
|Item Size:||12 x 0.1 x 0.1 inches|
|Package Weight:||0.35 pounds|
|Package Size:||12.2 x 0.3 x 0.3 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Gizmo Dorks, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: KT-CP0127, ean: 0810234030335,
Take your designs to the next level with the all-new LulzBot TAZ Dual Extruder v3 Tool Head. This tool head was engineered to utilize dedicated support material, including soluble filament, like PVA, that dissolves and separates in water, freeing you...
mpn: SK-18-199, ean: 0651354843258,
SIQUK 3 Pieces (1.5 Meters) PTFE Blue Tubing and PC4-M6 Fittings with PC4-M10 Fittings for 3D Printer 1.75mm Filament Specification Teflon tube Material: PTFE (Poly Tetra Fluoro Ethylene) Outside Diameter: 4mm Inside Diameter: 2mm Density: 2.15-2.2...
By Gizmo Dorks
mpn: GD-PEI3M-220MM, ean: 0887503182132,
InstallationThe Polyetherimide sheet comes with 3M 468MP adhesive already laminated to the PEI. Apply the PEI with slight pressure and at an angle to prevent and minimize air bubbles. Once applied set the print bed to 60C and apply pressure evenly ac...
mpn: IC015, ean: 0192187277952,
AIKEER Accessories Series Designed and Manufactured by AIKEER Only Specification of PTFE Teflon Tube Material: PTFE (Poly Tetra Fluoro Ethylene)，Density: 2.15-2.20g/cm3 Heat resistance, up to 260℃ Outside Diameter: 4mm, Inside Diameter: 2mm Colo...
mpn: CR-013, ean: 0603964740175,
3D Printer Filament Holder Material: AcrylicFilament Holder Size Height: 1.41 in, Length: 5.47 inUniversal 3D Printer Filament Spool Holder, Suitable for Reprap 3D Printer PLA/ABS Filament Spool HolderPackage Containing: Set of 2 pieces holder to hol...
mpn: BT20-01, ean: 0080596039189,
Dremel build tape is a thin, plastic sheet that can be placed on top of your Dremel build plate in order to protect the plate from scratching. The build tape surface is engineered to allow the filament to easily stick to the tape while printing, but ...
Description: *Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention. *The heating wire inside which is wound onto a ceramic core. *The number of coils varies depending on the power, and provi...
mpn: Ive-3D071005, ean: 4568643241366,
Cartridge Heater Description-Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention-The heating wire inside which is wound onto a ceramic core-The number of coils varies depending on the power,...
If you want to make your printing platform flat enough, ideal stuff is glass sheet. Tempered Silicon glass is rated for higher temperatures than normal sheet glass making it a better material for use as a heated bed. After cracking a few sheets of no...
mpn: NM17DMPX2, ean: 0759614709327,
These vibration dampers are a great motor mount accessory for 3D Printers, CNC, or other hardware that uses NEMA 17 steppers or electrical motors. Installed between your stepper and the mount with the original screws, they will drastically reduce noi...