Login       My Wishlist
  My Cart
$0.00 / 0 items
 
In The National Interest
Politics and Policy in the Interest of the Nation
International Access
Global Shipping Options Available
  Our Catalog   Fasteners   Anchors   Drive Anchors

Heavy Duty 1'' x 66″ with 10″ Helix “Galvanized” Screw Anchor


Heavy Duty 1'' x 66″ with 10″ Helix “Galvanized” Screw Anchor by Milspec Anchors LLC at In The National Interest. MPN: 16610G. Hurry! Limited time offer. Offer valid only while supplies last. Heavy Duty 1'' x 66″ with 10″ Helix ''Galvanized'' Screw Anchor Heavy duty 1'' Shaft and welded closed Eye Ideal for corrosive environments in medium to soft Soils - ''Hot dipped Galvanized Finish'' Commonly used for Mooring Boats and docks, securing vineyard trellises, Large storage sheds, retaining walls, radio antennas, small windmills, Long Hop runs All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are


Product Description & Reviews

Heavy Duty 1" x 66″ with 10″ Helix "Galvanized" Screw Anchor Heavy duty 1" Shaft and welded closed Eye Ideal for corrosive environments in medium to soft Soils - "Hot dipped Galvanized Finish" Commonly used for Mooring Boats and docks, securing vineyard trellises, Large storage sheds, retaining walls, radio antennas, small windmills, Long Hop runs All eye anchors are manufactured from steel that conforms to ASTM A-36 M1020 standards. Holding strength is based on clay soils which are of hard to medium density. The holding strength is reduced in softer less dense soils and sandy soils. To ensure maximum holding strength, anchor must be installed to full depth with the bottom of eyelet at ground level. Anchor eyelets are always weld closed, eyelets can be left open upon request of the customer. Can be installed by hand in softer soils with a "installation bar" harder soils may need power installation equipment 12,000 lb+ pull out resistance in Hard Pan soils- less in less dense soils MADE in the USA Specifications: Finish: Hot Dip Galvanized Shaft Diameter: 1″ Helix: Single 10″ ID of Eye: 1 1/2″ Welded closed Length: 66"

Features & Highlights

  • Helical Anchor
  • 1" x 66" with 10" Helix- Galvanized
  • Screw Anchor

Additional Information

Manufacturer:Milspec Anchors LLC
Brand:Milspec Anchors LLC
Part Number:16610G
Publisher:Milspec Anchors LLC
Studio:Milspec Anchors LLC
MPN:16610G
UPC:684758110367
EAN:0684758110367
Item Weight:40 pounds
Item Size:66 x 10 x 10 inches

Heavy Duty 1'' x 66″ with 10″ Helix “Galvanized” Screw Anchor by Milspec Anchors LLC

Buy Now:
Heavy Duty 1'' x 66″ with 10″ Helix “Galvanized” Screw Anchor

Brand: Milspec Anchors LLC
4.7 out of 5 stars with 162 reviews
Condition: New
Lead Time: 1 - 2 Business Days
Availability: In Stock
$57.16


Quantity:  

 


View More In Drive Anchors.

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by Milspec Anchors LLC, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


Wej-It Nail-It DN1410 Drive Anchor, Zamac Alloy, Zinc Plated Finish, Meets GSA FFS-325 Group V Type 2 Class 2 Specifications, 1/4" Diameter, 1" Length (Pack Of 100)
By Wej-It
mpn: DN-1410, ean: 0013918502108,
The Wej-It Nail-It DN1410 drive anchor is made of zamac alloy and cold rolled steel, provides a secure hold in concrete, block, brick, and stone, and meets Federal Specification GSA FFS-325 Group V, Type 2, Class 2. The anchor body inserts into a drilled hole and a hammer (sold separately) drives the pin down into the body, expanding the body and gripping the mounting material. The anchor's mushroom head lies above the material surface when installed, and the nail enters the head when installed

Hard-to-Find Fastener 014973169992 Nylon Nail Drive Anchors, 1/4 x 1, Piece-24
By Hard-to-Find Fastener
mpn: HWATN-033-24, ean: 0738287119923,
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get

(100) Flat Head 1/4 x 3 Split Drive Anchors Concrete Nail-In Hammer-In
By Lexar Industrial
mpn: 201876064208,
Lot of (100) split drive anchors. These zinc plated anchors are designed for a 1/4'' drill hole and are 3'' in length.Diameter: 1/4. Length: 3. Drill Size: 1/4. Finish: Zinc.

Powers Fastening Innovations 05531 Spike Anchor - 1/4-Inch by 3-1/2-Inch Mushroom Head Grade 8.2 Carbon Steel Pre-Expanded Anchor, 100 Per Box
By Powers Fastening Innovations
mpn: 05531, ean: 0075352055312,
Powers Fasteners is the leading supplier of concrete and masonry anchors in North America and has been a leader in the fastening industry since 1921. Powers is an ISO-9001 international anchoring products company with extensive expertise in the following groups: Mechanical Anchors, Adhesive, Light Duty, Roofing and Carbide Drill Bits.One Piece, tamper-proof anchor for use in concrete, block, brick or stone. Formed with an ''s'' shaped configuration at the working end of the anchor to create an

Blue Hawk 18-Pack 1/8-in x 2-in Concrete Anchors (Screws Included)
By Blue Hawk
mpn: 21-9572, ean: 0820909575719,
Hollow Wall Drive Anchors 1/8 Inch Short Hollow Wall 18 EAHollow Wall Drive Anchors 1/8 Inch Short. Hollow Wall 18 EA.

1/4" x 1 1/2" Hammer Drive Anchors/Mushroom Head/Zamac Alloy Body/Steel Zinc Nail (Carton: 100 pcs)
By Newport Fasteners
mpn: 956067, ean: 8945136164689,
Hammer Drive Anchors, 1/4'' x 1 1/2'' Hammer Drive Anchors / Mushroom Head / Zamac Alloy Body / Steel Zinc NailHammer Drive Anchors. Mushroom Head. For attaching termination bar to concrete, brick or masonary walls. Anchor Body: Zamac. Pin: Carbon Steel.

Hard-to-Find Fastener 014973285425 Nylon Mushroom Nail Drive Anchors, 3/16 x 1, Piece-100
By Hard-to-Find Fastener
mpn: NDAMN-033-100, ean: 0014973285425,
We stock a wide variety of fasteners ideal for many applications arround the home, farm, business, automotives, and in industry. Most of our fasteners have a light zinc plating over steel giving a more rust resistant finsh. We also sell coated and stainless products for additional rust resistance. We stock many grades of fasteners ranging from low carbon steel on up to hardened, heat treated steel. Not all fasteners are applicable for all applications so be certain to test thouroughly and get

Heavy Duty Anchor Kit- Storage Building or All Purpose Use ''with Installation Rod''
By Milspec Anchors LLC
mpn: MSA0530W/4K2CA50W/DR, ean: 0684758110886,
HEAVY DUTY Anchor Kit- Storage Building or All Purpose Use ''With installation Rod'' Heavy Duty Anchor Kit- Storage Building or All Purpose Use A must for wind protection! Easy to install by hand! Kit includes: 4/ea.- 30″ Eye Anchors with 4″ Helix - Welded closed loop! 50' -of 1/8'' GAC with 2000 MBS and 4/ea. 1/8'' cable clamps 1/ea.- 3/4'' x 30'' Installation Rod Removable - Re-useable - Install by hand or machineEarth Anchor. Ground Anchor. Screw Anchor. Anchor.

Pack of 6 - Duckbill 88-ATC Earth Anchor - Includes 1 Drive Steel Tool
By Duckbill
mpn: 88-ATC + 88DS, ean: 0698035180226,
This package includes 6 Duckbill 88-ATC Earth Anchors and 1 Drive Steel Tool. These Duckbill Earth Anchors work similar to toggle bolts in the soil, securing items in the ground that are prone to being stolen, moved, or blown away from heavy winds. No holes need to be dug and no concrete needs to be poured, just use a hammer and a Drive Steel Tool to drive the anchor firmly into the ground. Once the anchor is driven into proper depth, remove the steel tool and pull up on the cable to set the

CONFAST 1/4" x 2" Hammer Drive Anchor (100 per box)
By CONFAST
mpn: HD142,
ApplicationsThe anchor is made from ZAMAC. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Dry environment.Hole Diameter/Bit DiameterThe anchor requires a 1/4'' hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Diameter of Anchor The diameter of the anchor is 1/4''.Length Anchor The length of the anchor is



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - inthenationalinterest.com. All Rights Reserved.