Henkel Loctite 242 Nut & Bolt Threadlocker, 50mL
Huge Savings Item! Save 12% on the Henkel Loctite 242 Nut & Bolt Threadlocker, 50mL by Loctite at In The National Interest. MPN: 9048. Hurry! Limited time offer. Offer valid only while supplies last. * To prevent hardening, the anaerobic adhesive should be in contact with air. A large 120ml container was filled with 50ml of contents. There is only
* To prevent hardening, the anaerobic adhesive should be in contact with air. A large 120ml container was filled with 50ml of contents. There is only half of the bottle, but the contents are 50ml. * Safety Precautions Keep out of reach of children. * Preparation Protect work area. Parts to be sealed must be clean and dry. Shake the product thoroughly before use. Note: To prevent the product from clogging in the nozzle, avoid touching the bottle tip to the metal surface. * Application For Thru Holes: Apply several drops of the product onto the bolt at the nut engagement area. For Blind Holes: Apply several drops of the product down the internal threads to the bottom of the hole. Assemble parts and tighten as required. Sets in approximately 10 minutes and fully cures in 24 hours. * Cleanup Clean adhesive residue immediately with a damp cloth. Cured product can be removed with a combination of soaking in methylene chloride and mechanical abrasion such as a wire brush. For disassembly, shear with standard hand tools and remove with methylene chloride. In rare instances where hand tools do not work because of excessive engagement length, apply localized heat to nut or bolt to approximately 482°F (250°C). Disassemble while hot.
Features & Highlights
- Prevents loosening from shock and vibration.
- No corrosion or abrasion, Can be disassembled if necessary, Easy assembly by anyone.
- Can be used on various sizes of fasteners - reduces inventory costs.
- Permanently locks studs and press fits.
- Medium strength thread locker for fasteners up to 3/4". Cures reliably even on stainless steel. Tolerant of oil and other contamination. Protects threads from rust and corrosion. Parts can be disassembled with hand tools. Temp range -65 to 300 degrees F. Cure speed 15 min. Full 24 hrs.
|Manufacturer:||Henkel Asia Paciffic & China Headquarters|
|Publisher:||Henkel Asia Paciffic & China Headquarters|
|Studio:||Henkel Asia Paciffic & China Headquarters|
|Item Weight:||0.11 pounds|
|Item Size:||0.5 x 5.5 x 5.5 inches|
|Package Weight:||0.15 pounds|
|Package Size:||3.7 x 3.5 x 3.5 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Loctite, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 22221, ean: 0079340222212,
Loctite(R) 222MS(TM) Thread locker is ideal for fastener diameters of 1/4" (6mm) and smaller. Controlled lubricity for accurate clamp loads. Parts can be separated using hand tools.Ideal for fastener diameters of 1/4" and smaller. Controlled lubricit...
mpn: 26231, ean: 0079340262317,
Loctite 262 Mil Spec High Strength Red Threadlocker is a permanent threadlocker for fasteners up to 3/4" diameter. Excellent for preventing rust and corrosion in extreme chemical/ environmental conditions.Size: 50 ml. Color: Red. Mild odor. ...
mpn: 231926, ean: 0079340262218,
Loctite(R) 262(TM) Thread locker is a permanent thread locker for fasteners up to 3/4" (20 mm) in diameter. Excellent for preventing rust and corrosion in extreme chemical/environmental conditions.Sale Unit: BOTTLE. Permanent thread locker for fasten...
mpn: 51145, ean: 0079340511453,
442-51145 Features: -Very low friction. -Lubricates press fits, protects during break-in and under high static loads up to 750º F (400º C). -Allows maximum clamping from available torque. -Temp. Range: 750.0 °F [Max]. Product Type: -Paste. Dimensi...
Loctite 271 red threadlocker is compatible with metal materials with a 24 hr cure time. Delivers great performance with tensile strength of 250 psi. Minimum to maximum operating temperatures are -65 F to +300 F.Sale Unit: BOTTLE. Brand: Loctite. Loct...
272 Threadlocker, High Strength, High Temperature, 50 ml Bottle #88442-30769. PLEASE DO NOT HESITATE TO CONTACT THE SELLER IF YOU NEED ADDITIONAL DETAILS OF THIS PRODUCT...
565 PST Thread Sealant, Controlled Strength, 250 ml Tube #88552-30769. PLEASE DO NOT HESITATE TO CONTACT THE SELLER IF YOU NEED ADDITIONAL DETAILS OF THIS PRODUCT...
271 Threadlocker, High Strength, 50 ml Bottle #135381-30769. PLEASE DO NOT HESITATE TO CONTACT THE SELLER IF YOU NEED ADDITIONAL DETAILS OF THIS PRODUCT...
277 High Strength Threadlocker, 50mL Bottle #88448-30769. PLEASE DO NOT HESITATE TO CONTACT THE SELLER IF YOU NEED ADDITIONAL DETAILS OF THIS PRODUCT...
262 Threadlocker, Medium to High Strength, 50 ml Bottle #135374-30769. PLEASE DO NOT HESITATE TO CONTACT THE SELLER IF YOU NEED ADDITIONAL DETAILS OF THIS PRODUCT...