Hillman 811626 Hot Dipped Galvanized Hex Bolt, 1/2 X 5-Inch, 25-Pack
Huge Savings Item! Save 14% on the Hillman 811626 Hot Dipped Galvanized Hex Bolt, 1/2 X 5-Inch, 25-Pack by Hillman at In The National Interest. MPN: 811626. Hurry! Limited time offer. Offer valid only while supplies last. Hex Bolts are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. This bolt is compatible with standard nuts and washers of the same thread pitch, grade, and finish. These bolts are fully threaded.They require a pre-drilled hole with compatible female thread. Hex Bolts feature a six-sided head, which is designed to be tightened using a wrench or drill. Hot Dipped Galavanized.
Product Description & Reviews
Hex Bolts are bolts with hexagonal heads and machine threads for use with a nut or in a tapped hole. This bolt is compatible with standard nuts and washers of the same thread pitch, grade, and finish. These bolts are fully threaded.They require a pre-drilled hole with compatible female thread. Hex Bolts feature a six-sided head, which is designed to be tightened using a wrench or drill. Hot Dipped Galavanized.
Features & Highlights
- They require a pre-drilled hole with compatible female thread
- Hex Bolts feature a six-sided head, which is designed to be tightened using a wrench or drill
- Hot Dipped Galavanized
|Manufacturer:||The Hillman Group|
|Publisher:||The Hillman Group|
|Studio:||The Hillman Group|
|Item Weight:||0.081 pounds|
|Item Size:||4.6 x 6.8 x 6.8 inches|
|Package Weight:||7.7 pounds|
|Package Size:||4.6 x 3.3 x 3.3 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Hillman, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Exit Security Inc
Extra Long ''L'' Bolts for Outswing Exit Security Bars. Supplied in a pair. Used for deep door frames. Approx. 13 inches.Extra Long L-Bolts for Recessed Frames. Approximately 12''. Does NOT include mounting nuts. Supplied as a pair (2 L-Bolts).
Assembled and ready to go with the washer!Diameter/Pitch:5/16-18'' Length Under Head: 3/4''. Threads: Coarse, Full Thread. Wrench Size: 1/2''. Material: Grade 8 | Finish: Zinc Clear. Washer Material: EPDM Rubber.
M12X1.50, M12X1.5, M12 Metric Stainless Steel Allen Head Screw Plug (2) Free Solid Copper Sealing Gaskets Included! Screw Diameter: M12, 12mm Fine Thread Pitch: 1.5 Head/Flange Diameter: 17mm Overall Length: 15mm Length Under Head: 12mm (Including 3mm taper) Threaded Length: 9mm Drive Style: Allen Socket / Hex Key Allen Drive Size: 6mm Standard: DIN 908 Thread Direction: Right Hand Material: A2, A2-50, 304 Stainless Steel Stainless Steel provides a corrosion resistant
By The Hillman Group
mpn: 372164, ean: 0008236726350,
The Wedge Bolt+ anchor is a Building Code Approved one-piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented steel threads tap into the hole providing strong loads. The anchor is designed for structural loading in cracked and untracked concrete. Wedge Bolts are designed to fit standard fixture holes. For proper performance, use a Wedge Bit.Wedge anchor size is equal to hole size. No maximum hole depth. Permanent
By The Hillman Group
mpn: 370051, ean: 7147905892996,
Toggle bolts come with spring-action wings and are intended for anchoring into hollow walls. The wing is designed to spread apart behind the base material upon installation for firm hold in hollow wall applications. The wing disperses the weight of the secured item over a larger area, increasing the weight that can be secured compared to a regular bolt.Features a round slotted/Phillips head. A pre-drilled hole is required for installation. Toggle bolts are very strong and are great for hanging
By John Deere
John Deere Original Equipment Spring #M146683 (2-Pack).
M10X1.00, M10X1, M10 Metric Stainless Steel Allen Head Screw Plug (3) Free Solid Copper Sealing Gaskets Included! Screw Diameter: M10, 10mm Extra Fine Thread Pitch: 1.0 Head/Flange Diameter: 13.7mm Overall Length: 11.2mm Length Under Head: 8mm (Including 2mm taper) Threaded Length: 6mm Drive Style: Allen Socket / Hex Key Allen Drive Size: 5mm Standard: DIN 908 Thread Direction: Right Hand Material: A2, A2-50, 304 Stainless Steel Stainless Steel provides a corrosion
mpn: 3SBT905C0108, ean: 0842176100098,
5/16-18 x 1-1/2'' Stainless steel hex bolts.
mpn: 2154, ean: 0008236016680,
Carriage Bolts are designed to fasten a wooden face to either a wood or metal frame. Its smooth, rounded head is designed to eliminate the need for a washer and provide a semi-flush finish to applications. The square underside of the head is self locking to eliminate spinning and the need for a driving tool. Bolts are sized 3/16'' wide by 3/4'' long.Carriage bolts are designed to fasten a wooden face to either wood or metal.. Flat, smooth head eliminates the need for a washer. Square underside
mpn: 831487, ean: 0008236925043,
Hurricane track bolts are used in any of the F Tracks (sill tracks) to secure your panel(s) or wind screens. The track bolts have a square head that slides into the track allowing you set the location of the fastener where ever it's needed. Used for protection from hurricanes.Hurricane track bolts are used to secure your clear, aluminum or steel storm shutters to the lower sill or F track. Square head fits easily into track. Stainless Steel.