The 841 Super Shield Conductive Coating reduces electromagnetic or radio frequency interference (EMI/RFI), an issue for all electronic devices. It is a durable acrylic coating pigmented with a high purity nickel flake, and is UL approved for adhesion to ABS and polycarbonates at hot and cold temperatures. It is designed to be applied to the interior of plastic electronic enclosures, and is a simple way to deal with EMI/RFI issues, allowing devices to pass FCC emission testing.UL Recognized (File # E202609). Tested in compliance with IEEE Std. 299-1997. High Conductivity. Tough and durable coating. Stronger adhesion than water based coatings. Low VOC's. Median attenuation 50 dB +/-25 dB per 38 micrometer for frequency range of 10 to 18,000 MHz. Its primary applications are in cell phones, PDA’s, other consumer electronics, telecommunication equipment, industrial equipment, medical devices, military devices, and aerospace equipment. It can also works well on drywall, and can be used to shield entire rooms. The 841 coating adheres to ABS, PBT, and most materials found on printed circuit assemblies; however, it is not compatible with contaminants like water, oil, and greasy flux residues that may affect adhesion. If contamination is present, clean the surface to be coated first. RoHS compliant.
Features & Highlights
- UL Recognized (File # E202609)
- Tested in compliance with IEEE Std. 299-1997
- High Conductivity
- Tough and durable coating with stronger adhesion than water based coatings
- Median attenuation 50 dB ±25 dB per 38 μm (~1.5 mil) for frequency range of 10 to 18,000 MHz
|Package Weight:||15.95 pounds|
|Package Size:||9.5 x 9 x 9 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by MG Chemicals, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
mpn: 2022794, ean: 7613023715122,
No hole cleaning required with the revolutionary new HIT-Z anchor rod
Automatic hole cleaning with TE-CD and TE-YD drill bits and the Hilti VC20/40 vacuum
Working time optimized for rebar and deep anchoring applications
Suitable for use in cracked...
By Armor Garage
Armor Granite garage floor epoxy is self leveling, skid-resistant, impact resistant, chemical & salt resistant and at 23 mils thick it's more than twice as thick as our closest competitor and over 10 times thicker than store bought garage flooring ep...