Milwaukee Valve BB2-100 Series Bronze Butterfly Valve, Unibody, Stainless Steel 304 Disc, Lever Handle, 1" NPT Female
On Sale Now! Free Shipping Included! Save 3% on the Milwaukee Valve BB2-100 Series Bronze Butterfly Valve, Unibody, Stainless Steel 304 Disc, Lever Handle, 1'' NPT Female by Milwaukee at In The National Interest. MPN: BB2-100 - 100. Hurry! Limited time offer. Offer valid only while supplies last. The Milwaukee Valve BB2-100 series unibody butterfly valve is made of bronze with a stainless steel 304 disc, and it has a lever handle and female
The Milwaukee Valve BB2-100 series unibody butterfly valve is made of bronze with a stainless steel 304 disc, and it has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This bronze valve, which is higher strength and more corrosion resistant than brass, is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to enable maximum operating efficiency. The one-piece construction reduces the possibility of leakage and it has female NPT threaded connections on both ends that create tighter seals than straight threads. The maximum pressure is 175 pounds per square inch (psi) for use with water, oil, and gas (WOG), and the working temperature range is 30 to 275 degrees F. The zinc-plated steel lever handle with a vinyl sleeve rotates the stainless steel 304 disc in the valve seat to fully open, throttle, or stop flow through the valve. This valve is for use in applications including natural gas and liquid propane shutoff, fuel oil and oil systems, HVAC, and both liquid and vacuum service.
Butterfly valves are used to regulate flow between pipes, tubes, and hoses by rotating a lens-shaped disc in the center of the valve and are suited for high-capacity, low-pressure applications. When the valve is fully opened, the disc face is parallel to the inlet and outlet of the valve, and when the valve is closed, the disc face is perpendicular to the opening of the valve. Butterfly valves may have a handle or lever that aligns with the disc position (open or closed) for manual flow control. They are primarily used in applications including agriculture, water treatment, fire protection, compressed air or gas, and vacuum service.
The Milwaukee Valve Company manufactures manual and actuated valves, controls, and control accessories. The company, founded in 1901, and headquartered in New Berlin, WI, meets International Organization for Standardization (ISO) 9001:2008 and 14001:2004 standards.
Features & Highlights
- Made of bronze for higher strength and corrosion resistance than brass
- Full port for higher operating efficiency and decreased friction than standard ports
- 175 pounds per square inch (psi) rating for water, oil, and gas (WOG)
- Unibody (one-piece construction) valve for reduced possibility of valve leakage
- Female National Pipe Taper (NPT) threads form a tighter seal than straight threads
|Model:||BB2-100 - 100|
|Part Number:||BB2-100 - 100|
|MPN:||BB2-100 - 100|
|Package Weight:||1 pounds|
|Package Size:||6.2 x 3.4 x 3.4 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Milwaukee, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Butterfly valve is a type of flow control device, used to make a fluid start or stop flowing through a section of pipe. It is well applied to stainless steel pipe systems for food beverage, dairy, brewing, pharmaceuatical, bio-pharmaceuatical and che...
mpn: d5c21e6b440167b5a7b008ece2270e8a, ean: 0705691179560,
Description: - Name: IBC Tank Ball Value (1000L Tank) - Material: High molecular weight polyethylene (HDPE) - Novel structure and beautiful appearance - With acid resistance, alkali resistance, corrosion resistance, high mechanical strength, easy to ...
mpn: IQ-LBI6-3NXW, ean: 0614591001713,
Specification： Material: Stainless steel 304 Handle: 3 position plastic handle Seal: Silicone Operating Temperature : 15º F to 200º F Pressure：1.6MPA Size: 3/4" OD:50.5MM ID:19.0MM 1" OD:50.5MM ID:22.5MM 1-1/2" OD:50.5MM ID:35.1MM 2" OD:64MM I...
By Dixon Valve & Coupling
mpn: B5101E075CC-A, ean: 7440116753798,
B5101 Series Butterfly Valve with Pull Handle Clamp End. Clamp End. 100% hydraulic tested / 100% inspected. Field serviceable (no special tools required).B5101 Series Butterfly Valve with Pull Handle Clamp End. Size 3/4". EPDM Seat. Pressure Rating 1...
By Smith-Cooper International
mpn: 0160WDNL020, ean: 0092201318183,
This Smith-Cooper International 160 series wafer style butterfly valve is made of iron for compressive strength and resistance to wear. It has a lever handle, Buna-N seat, a nickel plated ductile iron disc, and flanged connections on both ends. This ...
By Bonomi valves
mpn: SCIN0141, ean: 0742118344026,
2-1/2" Bonomi G500S - Technical Specs Item Butterfly Valve Body Material Epoxy Coated Cast Iron Disc Material CF8M SS Body Style Wafer Body Size 2-1/2" Temp. Range -30 to 250F Seat Material EPDM Handle Type Gear Click Here for the Manufacturer Specif...
By Bonomi valves
mpn: SCIN0192, ean: 0742118344538,
10" Bonomi DA501S - Technical Specs Item Butterfly Valve Valve Body Material Epoxy Coated Cast Iron Port Full Port Connection Type Wafer Body Size 10" Pressure Rating N/A Temperature Max. -30 to 250F Disc Material Stainless Steel Seat Material EPDM A...
By Bonomi valves
mpn: SCIN0044, ean: 0742118343050,
2" Bonomi SR500S Series - Technical Specs Item Butterfly Valve Valve Body Material Epoxy Coated Iron Port Full Connection Type Direct Mount Size 2" Pressure Rating N/A Temperature Max. See Specification Sheet Actuator Type Spring Return Disc Material...
By Bonomi valves
mpn: SCIN0104, ean: 0742118343654,
8" Bonomi DA501S - Technical Specs Item Butterfly Valve Valve Body Material Epoxy Coated Cast Iron Port Full Port Connection Type Wafer Body Size 8" Pressure Rating N/A Temperature Max. -30 to 250F Disc Material Stainless Steel Seat Material EPDM Act...
By Bonomi valves
mpn: SCIN0199, ean: 0742118344606,
10" Bonomi SR501S - Technical Specs Item Butterfly Valve Body Material Epoxy Coated Cast Iron Port Full Connection Type Wafer Body Size 10" Pressure Rating N/A Temperature Max. -30 to 250F Actuator Type Spring Return Disc Material Stainless Steel Act...