PK2X Pocket-Strobe Stroboscope, Flash Range: 30 - 12,500 FPM, Flash Brightness: 1200 Lux, Complete Kit
PK2X Pocket-Strobe Stroboscope, Flash Range: 30 - 12,500 FPM, Flash Brightness: 1200 Lux, Complete Kit by Checkline at In The National Interest. MPN: PK2X. Hurry! Limited time offer. Offer valid only while supplies last. Flash Range: 30 - 12,500 RPM/FPM The PK2X hand-held Pocket Strobe® is convenient and accurate device to perform non-contact RPM measurements on rotating or reciprocating parts or components as well as a proven means for inspection of moving parts/machinery by ''freezing'' or ''slowing down'' the action. This stroboscopic effect is accomplished by matching the flash rate of the stroboscope with the repetitive rate (RPM) of motion of the target. A slow motion effect is accomplished with a
Product Description & Reviews
Flash Range: 30 - 12,500 RPM/FPM The PK2X hand-held Pocket Strobe® is convenient and accurate device to perform non-contact RPM measurements on rotating or reciprocating parts or components as well as a proven means for inspection of moving parts/machinery by "freezing" or "slowing down" the action. This stroboscopic effect is accomplished by matching the flash rate of the stroboscope with the repetitive rate (RPM) of motion of the target. A slow motion effect is accomplished with a slight mismatch of the relative speeds. The PK2X is powered by a rechargeable internal battery or directly from an AC power source allowing for continuous use if necessary, or continued use when the battery charge is low. It small size, lightweight design makes it perfect for use by field technicians or maintenance personnel. The new PK2X offer significant improvements from the previous generation model PK2 including the following (refer to table below): • 50% improvement in flash brightness • 100% improvement in battery run-time • Doubles the choice of power by permitting operation during re-charge or continuous operation when connected to AC-power This new model continues to offer the highest reliability, refined by over 10-years of continuous design & manufacturing improvements since the introduction of the original Pocket Strobe Model PK1 was introduced in 1996. The PK2X requires only one hand to operate, yet delivers performance comparable to much larger and heavier "pistol-grip" type models. It is ideal for industrial, laboratory, R&D and academic environments. Its small size and excellent performance provide superior convenience and value - at a reasonable price. Includes Strobe, Universal AC-Adapter/Charger and External Trigger Jack in Carrying Case with Traceable Calibration Certificate. Features Internal rechargeable Lithium Ion battery uses latest "smart-charge" technology for longest possible life and 2-Hour run-time on a single charge Bright XENON flash intensity (over 120
Features & Highlights
- Internal rechargeable Lithium Ion battery uses latest "smart-charge" technology for longest possible life and 2-Hour run-time on a single charge, Battery run time of 2 hours on full charge.
- Operates when being recharged or run continuously via AC-power, Resolution of ±1 RPM over the entire range with highly accurate speed control and drift-free operation.
- Bright XENON flash intensity (over 1200 Lux) with life of 200 million flashes, Accepts input from sensor for external flash triggering.
- Provided with a threaded insert on underside of strobe for mounting to articulating arm or other fixture, Universal (100 - 240V AC) AC-Adapter/Charger can be used anywhere worldwide.
- Portable, lightweight and rugged construction.
|Item Weight:||0.9 pounds|
|Item Size:||9.45 x 2.56 x 2.56 inches|
|Package Weight:||4 pounds|
|Package Size:||11 x 3.5 x 3.5 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Checkline, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Measuring wheel for contact linear rate and length measurement. 12'' circumference. Pack of 1.Measuring wheel. Used for contact linear rate and length measurement. 12'' circumference. Pack of 1.
By Monarch Instrument
The Monarch 6235-010 PLS pocket LED stroboscope has internal and external modes, time delay, phase shift, and a NIST Certificate of Calibration, and provides inspection and speed measurement. It is designed for motion analysis, preventive maintenance, printing inspection, and speed measurement of repetitive motion. The 7-array LED light source has a light output of 1800 lumens at 6000 flashes per minute (FPM) eight inches from the lens. Adjustable flash duration of 0.1 to 18 degrees or 0.5 to
The Shimpo DT-207LR-S12 portable contact/noncontact tachometer has a 12-inch wheel, measures rotational speed, linear speed, and total length, and has a laser beam for noncontact measurements. This portable contact/noncontact tachometer has a 12-inch wheel and is used for measuring the speed of motors, conveyor belts, and other moving and rotational systems. It measures rotational speed, linear speed, and total length for flexibility of use. Its optical sensor is a laser beam that works at a
mpn: VTSYIQI, ean: 0665059364123,
*Function *The dial tension gauge is suitable for relay tip pressure, electronic switch, micro switch, valve, spring pull pressure, dial measure equipment principal axis pressure, dial system equipment tip and the gag bitmechanical pressure, tape recorder buffer mechanism pressure, and other precise pressures, pulling force test. *Character *1: Simple to use *2: Refined appearance *4:Tension along allows clockwise direction along an anti-clockwise test, but it always stylus arm and push in the
The new Check-Line DTW Electronic Torque Wrenches are designed for simple and precise measurement of industrial, automotive, aerospace and many other applications. The DTW displays Real-Time and Peak torque on a large LCD display in ft-lb, in-lb or N-m, user selectable. 100 ft-lb / 145 N-m - 1/2'' Drive Features Displays in-lbs, ft-lbs & N-m (User selectable) CW and CCW operation Peak or Real-Time (track) mode (User Selectable) Buzzer and LED indicator for the pre-settable target torque 50 data
Guesswork is not acceptable failure is not an option. When you have people working around high tension cables and massive loads, there is no room for error. You have to have complete confidence in the strength and the accuracy of your measurement tools..
The new FG-3000 Series digital force gauges are the choice for simple, cost-effective tension and compression testing. Combining one of the most compact housings, yet maintaining a large back- lit LCD, these units were designed to fit perfectly in the hand for ease of use. The multi-language FG-3000’s provide menu programming for intuitive set-up of the instrument to your desired requirements. Three modes of operation are selectable: Track mode displays live readings, Peak mode records the
mpn: VM-6380, ean: 0658709446911,
Shipping Policy : 1.Battery and Liquid not included during the shipping. 2.WE ship the products by DHL ,FEDEX ,UPS or other express etc. Applications: * Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. Specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep.* VM-6380 can shown 3 same parameters in one display for 3 dimensional measurement. Features:
The Shimpo DT-105A-S12 portable contact tachometer has a 12-inch wheel, measures rotational speed, linear speed, surface speed, and total length, and provides 16 different measurement units for rate and speed. This portable contact tachometer has a 12-inch wheel and is used for measuring the speed of motors, conveyor belts, and other moving and rotational systems. It measures rotational speed, linear speed, surface speed, and total length for flexibility of use, and measures the rate of speed
mpn: FB10k, ean: 0728028234893,
Torbal FB10k Force Gauge, 2,000lbF (10kN) x 0.5lbF (2N). The FB is an affordable fully configurable force gauge designed for a wide range of tension and compression applications. No complex configuration or setup, the force gauge is intuitive and easy to use with logically arranged user menus which allow for out-of-the-box use. The unit includes all essential force measuring modes such as Peak, Multi Peak, and Standard (Real Time). Easy-to-use Pass / Fail threshold settings makes the FB ideal