Precision Brand 17SX3 Brass Shim Stock, 6″ x 60″ Roll, 260 Alloy Brass, 0.003″
Super Savings Item! Save 34% on the Precision Brand 17SX3 Brass Shim Stock, 6″ x 60″ Roll, 260 Alloy Brass, 0.003″ by Precision Brand at In The National Interest. MPN: 17SX3. Hurry! Limited time offer. Offer valid only while supplies last. Brass Shim is made from a half hard, cold rolled, 260 alloy brass. Precision Brand is the only manufacturer to offer Branded shim. It has everything
Brass Shim is made from a half hard, cold rolled, 260 alloy brass. Precision Brand is the only manufacturer to offer Branded shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability. Used in applications where corrosion problems exist; low magnetic permeability. Excellent forming qualities and may be lightly drawn, blanked or stamped. Precision Brand Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Features & Highlights
- Brass Shim is made from a half hard, cold rolled, 260 alloy brass
- Used in applications where corrosion problems exist; low magnetic permeability
- Excellent forming qualities and may be lightly drawn, blanked or stamped
- Especially useful for pilot production runs where material accuracy and economy are important
|Package Weight:||0.48 pounds|
|Package Size:||3.11 x 2.95 x 2.95 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Precision Brand, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Designed for bolting or welding to a fixture at any point along base, or base can be cut off for end welding. This model has a forged steel jaw with M10 swivel foot spindle assembly (TC-468206-M)....
By Precision Brand
Precision Brand Music Wire is spring tempered and made from high carbon steel alloy. High tensile strength and high fatigue resistance. Applications include springs, wire forms, control linkages, armature binding, ceramic cutting, and a variety of in...
mpn: 33, ean: 5012095003267,
Eclipse Trammel Heads are supplied as one pair of heads. They are suitable for laying out the distance between two points and for scribing arcs and circles. They can be used in conjunction with any wood offcut between 3/4" and 1-1/2" wide, minimum 3/...
By JW Winco
HRSS series hand retractable spring plungers are an economical choice for any application requiring a part to be located or indexed into a particular position.Stainless steel plunger body and pin. Stainless steel spring. ...
By Pro Series by HHIP
mpn: 8017-0112, ean: 0769053065328,
M12 X 1.75 Screwdriver Type Ball Plunger ~ Body Material: 12L14 Steel ~ Ball Material: 302 Stainless Steel ~ Smallest and lightest spring loaded device. ~ Side-load tolerant. ~ Control LED end forces. ~ Screwdriver installation. ~ Ball diameter is 8....
By JW Winco
M52X1.5 DIN1804 Slotted Round Nut Steel.Nut: Steel, tensile strength 500 N/mm2. Unhardened type: Not hardened or ground. RoHS Compliant. For our selection of hook spanner wrenches for use with these components, see DIN 1810A hook spanner wrenches wit...
mpn: CR-4 x 3,
LLambrich Drill Sleeves are completely hardened and ground, both internally and externally, and are offered in a wide range of sizes.DIN-2185 Drill Sleeve CR-4 x 3. Llambrich drill sleeves are completely hardened and ground, both internally and exter...
mpn: 1911-BB-2-17, ean: 0637769807764,
This is a new Fusion Match grade Stainless Standard Flange (.090") barrel bushing, with Radius edge Profile, for the Commander size 1911 pistol. Drop in Match style, made a bit larger at the critical contact points to make a tight fit with the slid...
By JW Winco
This knurled thumb screw is used for jig and fixture work.1/4-20 Thread. 1.5" Thread Length. 0.69" Head Diameter. 0.22" Head Thickness. RoHS Compliant. ...
Never misplace your vise handles again with the Kurt handle hanger.Can be mounted to any surface using the two Thru holes on back of the unit. Made of a high impact material that will last. Made in the USA. ...