Login       My Wishlist
  My Cart
$0.00 / 0 items
 
In The National Interest
Politics and Policy in the Interest of the Nation
International Access
Global Shipping Options Available
  Our Catalog   Fasteners   Screws   Concrete Screws

Red Head ITW 1/4" x 1-3/4" 410 SPF4-134 Stainless Steel Flat Phillips Tapcon


Red Head ITW 1/4'' x 1-3/4'' 410 SPF4-134 Stainless Steel Flat Phillips Tapcon by ITW/Buildex at In The National Interest. MPN: SPF4-134. Hurry! Limited time offer. Offer valid only while supplies last. ApplicationsThe anchor is made from 410 Stainless Steel, and is Silver Climaseal Coated. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Moist environment.Head Style The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached.Hole Diameter/Bit DiameterThe anchor requires a 3/16'' hole to be drilled in the base material (Concrete, Block, and Brick). The


Product Description & Reviews

ApplicationsThe anchor is made from 410 Stainless Steel, and is Silver Climaseal Coated. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Moist environment.Head Style The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached.Hole Diameter/Bit DiameterThe anchor requires a 3/16" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Driver RequiredA #3 is required for driving the anchor into the base material.Diameter of Anchor The diameter of the anchor is 1/4".Length Anchor The length of the anchor is 1-3/4"Thread LengthThe length of the threads on the anchor is 1-3/4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 3/4". This will ensure that the minimum embedment of 1" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4" diameter anchor requires the hole in the fixture to be 5/16".Spacing between AnchorsEach anchor must be spaced a minimum distance of 4" from each other when measured center to center.Edge DistanceIt is very important not to install the anchor any closer than 3" from an unsupported edge of the concrete.

Features & Highlights

  • FREE SHIPPING-All orders $25 or more ship for free; buy more and save more
  • BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost
  • FLAT PHILLIPS HEAD--Can be driven with Phillips Screw Driver
  • SELF-TAPPING-Taps threads directly into masonry and requires no other anchor
  • DIAMOND POINT-Easier to drive the screw to save time

Additional Information

Manufacturer:ITW/Buildex
Brand:ITW/Buildex
Part Number:SPF4-134
Publisher:ITW/Buildex
Studio:ITW/Buildex
MPN:SPF4-134
UPC:092097909526
EAN:0092097909526
Package Weight:1.8 pounds
Package Size:3 x 3 x 3 inches

Red Head ITW 1/4'' x 1-3/4'' 410 SPF4-134 Stainless Steel Flat Phillips Tapcon by ITW/Buildex

Buy Now:
Red Head ITW 1/4" x 1-3/4" 410 SPF4-134 Stainless Steel Flat Phillips Tapcon

Brand: ITW/Buildex
4.2 out of 5 stars with 65 reviews
Condition: New
Lead Time: 1 - 2 Business Days
Availability: In Stock
$43.99


Quantity:  

 


View More In Concrete Screws.

 


Have questions about this item, or would like to inquire about a custom or bulk order?


If you have any questions about this product by ITW/Buildex, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


ITW 24326 Tapcon Maxiset 1/4 in. x 2-1/4 in. Hex Head Concrete Anchors Silver, 50-per Pack
By ITW
mpn: 24326, ean: 0092097243262,
Tapcon concrete anchors deliver superior precision. TAP its own threads into concrete. Great alternative to expansion anchors, plugs, lag shields.Works in all masonry-based material including concrete, block or brick. Use these screws for a variety of projects including fixing shutters, screened porches, pool enclosures. Ultrashield finish delivers long-life corrosion resistance. Chisel edges accurately cut threads into concrete allowing for consistent driving performance and back holding

Chenango Supply 1/4 x 1-1/4" Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit (Miami-Dade Compliant) (1/4 x 1-1/4)
By Chenango Supply
mpn: CSF-04125-100, ean: 0716715821853,
Concrete Screws or ''Tapcons'' are great for screwing into concrete. Included masonry drill bit is 3/16'' size. Used to anchor signs, fixtures to concrete and block buildings. These Concrete Screws have received Product Control Notice of Acceptance (No. 15-0930.14) from the Miami-Dade Department of Regulatory and Economic Resources, certifying that they meet all Miami-Dade Requirements.1000 Hour Salt Spray Test Coating. 3/16 Concrete Screw Drill bit included in box. These are commonly known as

MKT Steel Conset Masonry Screw Anchor, Phillips Flat Head, 3/16" Diameter x 1-3/4" Length (Box of 100)
By MKT
mpn: P3175, ean: 0082275414034,
MKT Fastening steel conset masonry screw anchor. Commonly known as ''Tapcon''. Made of high strength steel for use in all types of solid and hollow masonry, wood and stone. Fluorocarbon coating offers high resistance to corrosion; costing withstands 1000 hour salt spray test. Cuts its own threads. Fast, easy installation; drill bit included in each box. Softer base materials require undersized bits for best results.Commonly known as ''Tapcon''. High strength steel for use in all types of solid

MKT Steel Conset Masonry Screw Anchor, Phillips Flat Head, 3/16" Diameter x 2-3/4" Length (Box of 100)
By MKT
mpn: P3275, ean: 0082275414072,
MKT Fastening steel conset masonry screw anchor. Commonly known as ''Tapcon''. Made of high strength steel for use in all types of solid and hollow masonry, wood and stone. Fluorocarbon coating offers high resistance to corrosion; costing withstands 1000 hour salt spray test. Cuts its own threads. Fast, easy installation; drill bit included in each box. Softer base materials require undersized bits for best results.Commonly known as ''Tapcon''. High strength steel for use in all types of solid

Red Head HW4-600 Tapcon Hex Washer Head 1/4-Inch by 6-Inch Anchor (100 per Box)
By ITW Red Head
mpn: HW4-600, ean: 0662520072815,
From the manufacturer: Tapcon makes the ''original masonry'' anchor that cuts its own threads into concrete, brick, or block. Blue climaseal provides extended corrosion protection. Each boxes comes with 100 anchors and 1 carbide tipped tapcon drill bit. ITW tapcons are made in the USA. Specifications Fixture Thickness: 4-1/2'' - 5'' Recommended Tapcon Length: 6'' (152.4mm) Bit Length: 7-1/2'' (190.5mm)Cuts it's Own Threads into Concrete. Fast and Easy Installation - Three Anchors per

Simpson Strong Tie THDB62600HMG Titen HD Heavy Duty Screw Anchor Mechanically Galvanized 5/8" by 6"- 10 per Box
By Simpson Strong-Tie
mpn: THDB62600HMG, ean: 0707392992721,
Simpson strong-tie stands apart from the rest in quality and reliability. Every production run goes through rigorous testing to ensure all products can handle higher loads, resist corrosion and make installation more efficient. Simpson offers a wide variety of fasteners, accessories and tools under strong-drive structural fasteners, deck-drive Premium fasteners and quik-drive auto-feed screw driving systems.High-load capacity as a result of the Full-Length threads. Specialized heat-treating

100 Qty 1/4" x 4" Hex Head Phillips Diamond Tip Concrete Screws to Anchor Masonry, Block & Brick (BCP503)
By BCP Fasteners
mpn: BCP503, ean: 0688938506568,
Corrosion resistance and long lasting performance due to the EnviroSeal blue coatingDeep threads provide superior holding strengthGreat for anchoring items to concrete, brick, block, or other masonry materialsThe diamond tip allows for superior penetriating into hard materialsPackage includes 100 screws and 1 masonry drill bitConcrete screws are a special threaded screw, with hardened notched threads and high-low threads. The notches and the high-low threads help to eliminate concrete shavings

3/8" x 3" Wej-It Power-Skru Bolt Anchors - Mechanically Galvanized - 50/BX
By Wej-It
mpn: ATEZG3830, ean: 0795525768961,
3/8'' x 3'' Wej-It Power-Skru bolt anchors, mechanically galvanized, 50 pieces per box.

Chenango Supply 1/4 x 3-1/4" Flat Head Concrete Screw Anchor. 100 pieces With Drill Bit(Miami-Dade Compliant) (1/4 x 3-1/4)
By Chenango Supply
mpn: CSF-04325-100,
Concrete Screws or ''Tapcons'' are great for screwing into concrete. Included masonry drill bit is 3/16'' size. Used to anchor signs, fixtures to concrete and block buildings. These Concrete Screws have received Product Control Notice of Acceptance (No. 15-0930.14) from the Miami-Dade Department of Regulatory and Economic Resources, certifying that they meet all Miami-Dade Requirements.1000 Hour Salt Spray Test Coating. 3/16 Concrete Screw Drill bit included in box. These are commonly known as

(500) Hex Washer Head 3/16 x 1-1/4 Concrete Masonry Screws Tapcon Anchor & Bit
By Lexar Industrial
mpn: 361379727635,
Lot of (500) indented hex washer head concrete screws. These blue xylan coated fasteners are 3/16'' thread and are 1-1/4'' in length with a 1/4'' hex drive. US Made masonry style drill bit is included.Thread Diameter: 3/16. Length: 1-1/4. Drive Type: Slotted Hex. Head Type: Indented Hex Washer. Drill Size: 5/32.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - inthenationalinterest.com. All Rights Reserved.