SKF N 13 Locknut, Right Hand, Steel, M65 Thread, 18 Threads per Inch
SKF N 13 Locknut, Right Hand, Steel, M65 Thread, 18 Threads per Inch by SKF at In The National Interest. MPN: N 13. Hurry! Limited time offer. Offer valid only while supplies last. This steel lock nut has right hand threads, uses a locking washer, and is suitable for locating a bearing and other components onto a shaft, as well
This steel lock nut has right hand threads, uses a locking washer, and is suitable for locating a bearing and other components onto a shaft, as well as for facilitating mounting bearings on tapered journals and dismounting bearings from withdrawal sleeves. The washer (sold separately) engages a keyway in the shaft and locks the nut in position if one of the tabs is bent over into one of the slots around the circumference of the nut.
Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.
SKF manufactures bearings, seals, and lubrication systems for automotive, energy, and other industrial applications. The company, founded in 1907 and headquartered in Gothenburg, Sweden, meets International Organization for Standardization (ISO) standards TS 16949 and 9001.
Features & Highlights
- Lock nut for locating bearing on shaft
- Uses locking washer (sold separately) for accurate placement
- Steel nut for strength and durability
- Right hand threads
- Imperial unit measurement for industry consistency
|Part Number:||N 13|
|Item Size:||8 x 4 x 4 inches|
|Package Weight:||0.5 pounds|
|Package Size:||3.2 x 0.6 x 0.6 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by SKF, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By U-Turn Fasteners, Inc.
#10-24 Nylon Insert Lock Nut (NM), 18-8 Stainless Steel (100 Pack) Nylon Insert Lock nuts, often called Nylock Nuts, are used to eliminate or greatly reduce the loosening of fasteners due to vibration. They are usually hex shaped lock nuts that have ...
By FAG Bearings
mpn: KM16, ean: 4012801174350,
The FAG KM series standard right-hand locknut with metric dimensions locks bearings onto shafts or adapter sleeves so that bearings stay in place. It is a right-handed locknut with 12 threads per inch and is made of steel for durability and resistanc...
By Small Parts
The 18-8 stainless steel hex nut has a self-locking toothed washer and a plain finish. It has six flat sides that a wrench can grip to turn from the side, enabling use when there is no space above the nut. The self-locking toothed washer digs into ma...
Package Description: Features: Brand new and high quality stainless steel screws and nuts. Material : Stainless Steel Type:M6x16mm Package includes: 50PCS Cage Nuts 50PCS screws 50PCS washers Warning： Choking Hazard--Small parts, not for chrild...
By Lexar Industrial
Lot of (300) hex lock nuts. These zinc plated nuts are 7/16-20 fine thread with a 5/8" hex and nylon thread locking insert.Thread Diameter: 7/16-20. Hex: 5/8. Finish: Zinc. ...
By RAW PRODUCTS CORP
mpn: 756554524546, ean: 0756554524546,
Keps K-Lock Nuts 18-8 Stainless Steel - #10/32 Qty-100A Keps nut, also called a K-nut or washer nut, is a nut with an attached, free-spinning washer.. It is used to make assembly more convenient. Common washer types are star-type lock washers, conica...
160 Pcs Stainless Steel Self-Locking Nylon Insert Hex Lock Nuts Kit,M3 M4 M5 M6 M8 M10 M12 LocknutsNylon Insert Lock Nuts are also known as stop nuts. Lock nuts are used for fastening to a bolt when mechanically joining materials together. The bolt t...
By Speedway Motors
This Thin Nylock Nut Kit contains 25 pieces. These nylocks are 5/8 Inch-18 thread with a self locking nylon insert in the thread. They are designed to increase locking force and prevent the nut from coming loose.Item Details5/8" - 18...
By ASMC Industrial
ASMC Industrial offers a comprehensive selection industrial, automotive, and construction fasteners. Our parts are high-quality, at low prices, shipped from stock. We also feature a full line of USA-made fasteners, including Grade 5 and Grade 8 hex c...
By BCP Fasteners
mpn: BCP274, ean: 0688938503222,
Zinc plated for corrosion resistancePackage of 385 pieces in 9 different sizesSizes include the following: 6-32(50pcs), 8-32(50pcs), 10-24(50pcs), 10-32(50pcs), 1/4-20(50pcs), 5/16-18 (50pcs), 3/8-16(40pcs), 7/16-14(25pcs) & 1/2-13(20pcs)Each size co...