Sydien 16x150mm Thread Piston Rod Double Action Air Cylinder with Y Connector and 2Pcs Pneumatic Quick Fitting (MAL16x150)
Sydien 16x150mm Thread Piston Rod Double Action Air Cylinder with Y Connector and 2Pcs Pneumatic Quick Fitting (MAL16x150) by Sydien at In The National Interest. Hurry! Limited time offer. Offer valid only while supplies last. 1Pcs Pneumatic Cylinder with 1pcs Y connector and 2pcs pneumatic quick fitting in a packModel: MAL16 x 150Material: Aluminum alloy and metalMain
1Pcs Pneumatic Cylinder with 1pcs Y connector and 2pcs pneumatic quick fitting in a pack
Model: MAL16 x 150
Material: Aluminum alloy and metal
Main Color: Green, Silver
Action Type: Double Action
Rod Type: Single Rod
Screw Hole Diameter: 5mm/0.2inch (Approx.)
Thread Rod Diameter: 6mm/0.24inch (Approx.)
Total Size: 25.5 x 2.2cm/ 10 x 0.87inch (L*D)
Packing Weight: 239g
Packing Size: 10.5x26x3cm
Y connector and pneumatic quick fitting is fit for Pneumatic Cylinder
High quality dust ring to protect bearing
Oil-bearing bearing life is longer, better piston rod, tightness, suitable for long-term use
Features & Highlights
- 1Pcs MAL16 x 150 Pneumatic Cylinder with 1pcs Y connector and 2pcs pnermatic quick fitting in a pack, double acting, single rod
- 16mm bore and 150mm stroke, Fluid: Air; Power: Pneumatic; Max.Press: 0.7MPa; Max.Press: 0.7MPa; Screw Hole Dia: 5mm/0.2inch (Approx.); Thread Rod Dia: 6mm/0.24inch (Approx.)
- Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease
- Two screw hole connections to get the air in and out, and a rod connected to the plunger that goes in and out.
- Cylinder is a mechanical devices which utilize the power of compressed gas to produce a force in a reciprocating linear motion.
|Manufacturer:||Shenzhenshi saidien dianzishangwuyouxiangongsi|
|Publisher:||Shenzhenshi saidien dianzishangwuyouxiangongsi|
|Studio:||Shenzhenshi saidien dianzishangwuyouxiangongsi|
|Package Weight:||0.42 pounds|
|Package Size:||3.11 x 0.83 x 0.83 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Sydien, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 203002, ean: 0615986001318,
Intended Use: Double-acting applications • Piston: Ductile iron • Gland: Ductile iron, drilled oil passages • Tube: Precision honed steel • Rod: Hard chrome plated • End Mounts: Ductile iron female clevises with pins and clips included • ...
mpn: CY-100, ean: 0711811435553,
It is widely applied to the automatic equipment in light industry, chemical industry, textile industry, electronic and machinery industry.Model NO. : CY-100. NA: 44.4mm; ΦNC: 20mm; ND: 80mm; NE: 112mm; NF: 40mm; NG: 30mm. NH: M20×1.5; NM: 20mm; NP:...
A lightweight hydraulic cylinder capable of lifting 10tons 6 inches.Tonnage=10. Stroke=6". Oil capacity (in3)=15.50. Recommended pump= B-700C. Working hydraulic pressure 10000 PSI. ...
Low height hydraulic cylinder with the lifting capacity of 20ton with a stroket of 1".Tonnage=20 ton 1st stage, 7 ton 2nd stage. Stroke=1". Oil Capacity(in3)=3.11. Closed height=2.19". Recommended pump=B-700C. ...
By ToolTuff Direct
Bore: 3"--3000psi Stroke: 14" Rod: 1-1/2" Retracted: 24-1/4" Extended: 38-1/4" Port: #8 SAE Pin Diameter: 1"...
By Prince Manufacturing
This Prince Sword hydraulic cylinder is an actuator for converting hydraulic power into mechanical motion. It is a double-acting cylinder with two 1/2" National Pipe Taper Female (NPTF) hydraulic ports for both extension and retraction of the rod. It...
mpn: RSM1500, ean: 0662005302413,
The RSM Series, Flat Jac Cylinders are a compact, flat design for use where most other cylinders will not fit. These single acting, spring return cylinders have handles for easy carrying, and mounting holes permit easy fixturing. The baked enamel fin...
All steel welded construction, weld-on clevis, ideal for construction and agricultural applications as well as like metal fabricating, waste/recycling and OEM manufacture of trailers. Heavy wall steel tubing, ground and polished chrome piston rod wit...
mpn: 204500, ean: 0615986021927,
The MAXIMª TC 2500 PSI tie-rod cylinder was originally designed for rugged agricultural applications, making it well suited to perform in demanding applications in any industry. This cylinder provides value pricing without sacrificing quality. Each ...
By Tool Tuff
mpn: CTCL2008, ean: 0748296491590,
2" Bore x 8" Stroke Hydraulic Welded Cross-Tube / Tie Rod Cylinder - 3000 psi - SAE Ports - 1 Year Replacement Warranty! From Tool Tuff Direct - Your Source for High Quality, Affordable Hydraulics Since 2012! - 2" Bore - 8" Stroke - 3000 PSI ...