TOPGREENER TSOS5-White In Wall PIR Motion Sensor Light Switch, Occupancy Sensor Switch, On/Off Override, Single-Pole, Fluorescent 500VA/Motor 1/8Hp/Incandescent 500W, Neutral Wire REQUIRED, White
Huge Savings Item! Save 11% on the TOPGREENER TSOS5-White In Wall PIR Motion Sensor Light Switch, Occupancy Sensor Switch, On/Off Override, Single-Pole, Fluorescent 500VA/Motor 1/8Hp/Incandescent 500W, Neutral Wire REQUIRED, White by TOPGREENER at In The National Interest. MPN: TSOS5-W-STICKERED. Hurry! Limited time offer. Offer valid only while supplies last. TOPGREENER TSOS5-W Motion Sensor Light Switch detects room occupancy to automate the On Off Light Control for energy saving and make life easier.
Delay Time Variable delay time between 15 seconds, 10 minutes, 20 minutes and 30 minutes
When you slide the switch to AUTO mode, TSOS5 PIR motion-activated sensor will detect motion and turn on load such as a lights, fans, motors, or heaters automatically; and turn off the load when no motion is sensed for preset delay time. The maximum coverage area is up to 707 sq. ft., 180-degree field of view; sensitivity level is adjustable in 4 positions from 30% to 100%. Passive Infrared PIR sensors detect occupancy by sensing the difference between heat emitted from the human body in motion and background space. Motion Sensor Switch is to provide adequate coverage with-in a space, motion activated sensors utilize a unique Fresnel lens which divides the coverage area into zones, thus enhancing the detection of small movement.
With TOPGREENER’s TSOS5 in-wall motion sensor light switch, you will enjoy the energy efficient benefits and avoid energy waste by preventing lights to turn on at Daylight even when motion is detected.
This motion sensor switch can be done easily by sliding the sliding switch on the front of the motion sensor. Use the TSOS5 as occupancy motion detector sensor, or set it to be in manual OFF or ON mode just like your standard ON/OFF. TOPGREENER’s TSOS5 PIR motion sensor light switch is perfect for areas like your hallway, stairway, closet, bathroom garage, and more!
Specifications: • Incandescent: 500-Watt @ 120 VAC • Fluorescent: 500-Volt Amp @ 120 VAC • Motor: 1/8HP @ 120 VAC • Coverage: 180 degrees, 707 square feet • Single-Pole use only • Neutral wire required
Features & Highlights
- Motion sensor switch automatically turns on/off lights, fans, and motors based on the occupancy and vacancy detected in a room
- AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch
- Max Sensor Coverage Area 707 sq ft, 180º Field of View. Motion sensor wall switch features adjustable range and sensitivity from 30% to 100%
- Occupancy sensor light switch variable time delay from 15 sec (test mode) to 30 min
- Neutral wire required for installation. 120VAC, Incandescent: 500W, Motor: 1/8HP. Single pole use only. Standard decorator wall plate included
|Color:||White - 1 Pack Motion Sensor Switch|
|Item Size:||0.0146 x 0.0273 x 0.0273 inches|
|Package Weight:||0.35 pounds|
|Package Size:||3 x 2.25 x 2.25 inches|