Yonico 14976 Bottom Cleaning Dado Router Bit with 1-1/2-Inch X 9/16-Inch 1/2-Inch Shank
Yonico 14976 Bottom Cleaning Dado Router Bit with 1-1/2-Inch X 9/16-Inch 1/2-Inch Shank by Yonico at In The National Interest. MPN: 14976. Hurry! Limited time offer. Offer valid only while supplies last. Cut perfectly clean 1-1/2'' wide dados with the Yonico 14976 bottom cleaning router bit. The two cutters meet in the center of the bit which leaves
Cut perfectly clean 1-1/2" wide dados with the Yonico 14976 bottom cleaning router bit. The two cutters meet in the center of the bit which leaves behind a very cleanly routed path. Can also be used to clear larger areas of material. 1/2" shank.
Features & Highlights
- Industrial Quality Router Bits
- C3 Micro-grain Tungsten Carbide Cutters
- Solid Hardened Steel Bodies with Anti-Kickback Design
- Build-up & Heat Resistant Teflon Coating
- Satisfaction Guaranteed & Lifetime Warranty
- Build-up and Heat Resistant Teflon Coating
- Satisfaction Guaranteed and Lifetime Warranty
|Item Weight:||0.33 pounds|
|Item Size:||1.5 x 1.5 x 1.5 inches|
|Package Weight:||0.45 pounds|
|Package Size:||2.6 x 1.3 x 1.3 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Yonico, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 32210-SC, ean: 0765573829631,
Best used for: Laminate or veneer-finish plunging and dadoing.• Cutting Diameter: 1/8" • Cutting Height: 1/2" • Shank Diameter: 1/4" • Overall Length: 2" • Flutes: 2 Down cut end mills shear in a downward direction causing the uppermost lay...
mpn: J3.3001Tix10pcs-SN, ean: 7147905897274,
Specification: Material: blade carbide (tungsten steel) Degree: 30° Shank Diameter: 3.175mm Cutting Edge Diameter: 0.1mm Total Length: 30mm Quantity: 1set (10pcs) Guaranty: Within 90 days product quality is not completely satisfied, please CONTACT ...
By Whiteside Router Bits
mpn: UD2102, ean: 0844278007022,
Whiteside Machine Company has been in the router bit business for over 30 years providing customer with quality products while at the same time striving to achieve complete customer satisfaction. Several woodworking magazines have tested Whiteside ve...
mpn: 070336_5x, ean: 0706795875419,
Specification: 100% Brand new , never used, Precision grinding Product Type: Flat bottom engraving bits Shank diameter: 3.175mm Tip diameter: 0.1mm Total length: 30mm Shape: V-shape Degree: 60 degree Material: solid carbide Application: It i...
mpn: 85078, ean: 0767654937136,
Large Diameter: 3/8"Small Diameter: 3/16"Overall Length: 1-7/8"Cutting Edge Length: 3/16"Shank: 1/4"Keyhole Bits Are Used To Cut Keyhole Slots In Plaques, Picture Frames And Other Wall Hanging ItemsWide And Narrow Flute Design Requires Lower Feed Rat...
By Amana Tool
mpn: 45210, ean: 0738685852101,
Straight Plunge Cutting Router Bits-1/4 Shank-2 Flute - High ProductionNew Superior Geometric Design for Super Clean Cuts. 1/4-Inch Cutting Diameter. 1-Inch Cutting Height, 2-1/4-Inch Length. 1/4-Inch Shank, 2 Flute. Carbide Tipped, Industrial Qualit...
mpn: A16042700UX0259, ean: 0602451756538,
Double Fluted design for sharp and long lasting cutting.Suitable for softwoods, hardwoods, chipboard, plywood and etc.Use on hand-held and table-mounted portable routers (routers are not included here).good for cleaning out dadoes and wide, square Gr...
mpn: 04-108, ean: 0881599014742,
Freud straight bits cut smoother than other bits because of the precise shear and hook angles. End of bit relief allows for fast plunging. 1/4" Overall Dia (D), 1" Carbide Height (h), 1/4" Shank, 2-1/2" Overall Length (H) Ideal For: Clean cuts in any...
mpn: 14169q, ean: 0765573826302,
Yonico 14169q Hinge Mortising Router Bit will rout clean cutouts for hinges or other shallow cutout projects. Shank bearing ideal for use with a hinge template. Two flute carbide cutters with 1/4" shank.Industrial Quality Router Bits. C3 Micro-grain ...
mpn: 34221-SC, ean: 0765573829365,
Best used for: Smooth contour milling & carving. • Cutting Diameter: 1/4" • Cutting Length: 1" • Shank Diameter: 1/4" • Overall Length: 2-1/2" • Flutes: 2 The ball nose end mills' rounded tip is designed to reduce tool markings on work pie...