Cylinders & Accessories - 62 - Page 2 - Extreame Savings! Save up to 43%
Extreame Savings! Up to 43% off on Cylinders & Accessories at In The National Interest, Page 2. Top brands include Baomain, Chief, AES Industries, CWA Hydraulics, Magister Hydraulics, SMC, Hydraforce, Hydroworks, Sydien, TORNADO HEAVY EQUIPMENT PARTS, Mighty, NMD, HYDRAFORE, uxcell, Kit King USA, Tool Tuff, & Maxim. Hurry! Limited time offers. Offers valid only while supplies last.
Baomain Pneumatic Air Cylinder SC 63 x 400 PT 3/8, Bore: 2 1/2 inch, Stroke: 16 inch, Screwed Piston Rod Dual Action
mpn: SC 63X400, ean: 0711811434358,
4.6 out of 5 stars with 184 reviews
Features: 63mm bore and 400mm stroke, double action and single rod,Adjustable cushion on both cylinder end covers to make sure the cylinder works very smoothly, safely and with low noise.With self-lubricating bearing, the piston rod is lubrication free.It is widely applied to the automatic equipment in light industry, chemical industry, textile industry, electronic and machinery industry.If you need accessories, please search ASIN: B077N6ZKT2; B077MWTQHS; B077N85BQG; B077N5V3L9 to find.Port
Chief WT Welded Cylinder: 3 Bore x 20 Stroke, 3000 PSI, 1.75" Rod Diameter with SAE #8 Port Size, Retracted: 28.0 and Extended Length: 48.0, 1" Pin Dia., 212734
mpn: 212734, ean: 0615986021040,
4.5 out of 5 stars with 137 reviews
The Chiefª WT is a high quality welded cylinder designed for heavier loads. The rod and base ends are welded cross-tubes with grease zerks. Designed for performance, the Chiefª WT has a heavy-duty piston as well as a piston stem complete with wear rings to reduce friction. The screw-in gland is removable from the rod end. These Cylinders are ideally suited for construction and agricultural applications, as well as other industries like metal fabricating, waste/recycling and OEM trailer
10 Ton Threaded Ram with 10" Stroke for Auto Body Pulling Post
mpn: AES-81110, ean: 0840998113258,
4.8 out of 5 stars with 14 reviews
10 Ton Threaded Ram with 10'' Stroke10 Ton Ram (with 10'' Stroke) made in Taiwan under American Quality Control. 10,000 PSI maximum pressure; Ram is threaded on both ends. Also compatible with 10 ton Porta Power kits. Thread Diameter: 1-5/8''; Ram Diameter: 2-1/4''. Height: 18'' (Collapsed); Height: 28'' (Extended).
CWA Hydraulics TR Tie Rod Cylinder 4" Bore x 10" Stroke x 1 1/4" Rod x 2500 PSI - Port: SAE 8 and 1/2 NPT
4.3 out of 5 stars with 56 reviews
CWA Hydraulics TR 2500 PSI Tie Rod Cylinder is ideal for agriculture, transportation, construction, forestry, material handling, oil/gas and any industrial application. This cylinder provides value pricing without sacrificing quality. All cylinders have full pressure test and ensures maximum reliability and performance.CWA Hydraulics Model No: 4010TR-ORB/NPT. Retracted Length: 20 1/4''. Extended Length: 30 1/4''. Port Size: SAE 8 and 1/2 NPT. Pin Size: 1''.
Tie-rod Hydraulic Cylinder Double Acting 2" Bore 24" Stroke Tie Rod
mpn: TRC 2x24, ean: 0854335007490,
4.5 out of 5 stars with 145 reviews
These high quality tie-rod hydraulic cylinders are manufactured in accordance with the needs and standards of the U.S. market. The product created for use in various types of machinery such as construction, transportation, agriculture, and waste. Rigid welded construction, durable ductile iron clevis end mounts and quality seals allow Magister Hydraulics cylinders to work in harsh conditions. All cylinders are fully and easily maintainable. Each units node runs through 150% pressure test before
"SMC Corporation C4SF-Z BOWL ASSEMBLY (AF, AFD, AFM40)"
You Save: 43%
4.6 out of 5 stars with 281 reviews
Product Line: AIRLINE EQUIPMENT. Product Family: AF MASS PRO. Product Class: AF MASS PRO NO SIZE RATING. Part Description: BOWL ASSEMBLY (AF,AFD,AFM40).
HY 6301024 DS 24 VDC - Hydra force Coil 2 Spade 24 Volt DC Fits 08, 80, 88, and 98 series Hydraforce Stems (1/2" Hole)
mpn: HY 6301024 DS 24 VDC,
4.5 out of 5 stars with 211 reviews
Hydra force Coil 2 Spade 24 Volt DC Fits 08, 80, 88, and 98 series Hydraforce Stems (1/2'' Hole)Hydra force Coil 2 Spade 24 Volt DC Fits 08, 80, 88, and 98 series Hydraforce Stems (1/2'' Hole).
Hydroworks Double Acting 3-Inch Bore 24-Inch Stroke Tie Rod Hydraulic Cylinder, 2500psi
You Save: 33%
mpn: T25302412, ean: 6943940752025,
4.9 out of 5 stars with 144 reviews
New Hydroworks Double Acting 3-Inch Bore 24-Inch Stroke Tie Rod HydraulicDuctile iron components provides excellent ductility and higher impact. Polyurethane u-cup double lip provides positive seal. High strength steel piston rod with hard chrome plated and precision ground & polished, 100hr salt spray tested. 2500PSI model is designed to withstand shock loads of up to 5000PSI. Ideal for agricultural and industrial application.
Sydien 16x100mm Double Action Single Rod Air Pneumatic Cylinder with Y Connector and 2Pcs Pneumatic Quick Fitting (MAL16x100)
4.7 out of 5 stars with 265 reviews
1Pcs Pneumatic Cylinder with 1pcs Y connector and 2pcs pneumatic quick fitting in a packModel: MAL16 x 100Material: Aluminum alloy and metalMain Color: Green, SilverAction Type: Double ActionRod Type: Single RodFluid: AirPower: PneumaticBore: 16mm/0.63inchStroke: 100mm/3.94inchMax.Press: 0.7MPaScrew Hole Diameter: 5mm/0.2inch (Approx.)Thread Rod Diameter: 6mm/0.24inch (Approx.)Total Size: 20.6 x 2cm/ 8.1 x 0.8inch (L*D)Packing Weight: 199gPacking Size: 10x21x3cmFeatureY connector and pneumatic
BOBCAT 6803312 HYDRAULIC CYLINDER SEAL KIT 863
By TORNADO HEAVY EQUIPMENT PARTS
4.5 out of 5 stars with 99 reviews
6803312 HYDRAULIC CYLINDER SEAL KIT FOR BOBCAT EQUIPMENT
Fits OEM Cylinder, Please verify kit before ordering.
Use With Cylinder Number: 6800973
ROD SEAL TYPE: U SEAL
PISTON SEAL TYPE: PISTON SEAL
863 SKID STEER (LIFT -S/N 514411001 & UP).
Baomain Pneumatic Air Cylinder SC 32 x 100 PT 1/8, Bore: 1 1/4 inch, Stroke: 4 inch, Screwed Piston Rod Dual Action 1 MPA
You Save: 7%
mpn: SC 32X100, ean: 0711811434822,
4.2 out of 5 stars with 17 reviews
Features: 32mm bore and 100mm stroke, double action and single rod,Adjustable cushion on both cylinder end covers to make sure the cylinder works very smoothly, safely and with low noise.With self-lubricating bearing, the piston rod is lubrication free.It is widely applied to the automatic equipment in light industry, chemical industry, textile industry, electronic and machinery industry.If you need accessories, please search ASIN: B077MX7P7D; B077N91GS3 to find them.Port size: PT 1/8. Bore: 1
Mighty Double Acting Hydraulic Welded Cylinder, Tube Cross - 2.5" Bore x 32" Stroke
4.9 out of 5 stars with 20 reviews
All steel welded construction, weld-on cross tube, ideal for construction and agricultural applications as well as like metal fabricating, waste/recycling and OEM manufacture of trailers. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. 3000PSI operating pressure, double acting.Shaft Diameter: 1-1/2'', Pin Diameter: 1''. Closed Length: 40''. Extended Length: 72''. Work Port: SAE 8. Max Load:
CWA Hydraulics WT Weld Cross Tube Hydraulic Cylinder 1 1/2" Bore x 6" Stroke x 1" Rod x SAE 4 Port x 3000 PSI
4.8 out of 5 stars with 57 reviews
CWA Hydraulics WT 3000 PSI Weld Cross Tube Cylinder is ideal for agriculture, transportation, construction, forestry, material handling, oil/gas and any industrial application. This cylinder provides value pricing without sacrificing quality. All cylinders have full pressure test and ensures maximum reliability and performance.CWA Hydraulics Model No: 1506WT. Retracted Length: 14''. Extended Length: 20''. Port Size: SAE 4. Pin Size: 3/4''.
CASE G33239 HYDRAULIC CYLINDER SEAL KIT (PACKING ASSEMBLY)
By TORNADO HEAVY EQUIPMENT PARTS
4.6 out of 5 stars with 292 reviews
G33239 (PACKING ASSEMBLY) HYDRAULIC CYLINDER SEAL KIT FOR CASE/DROTT EQUIPMENT
Fits OEM Cylinder, Please verify kit before ordering.
2 PIECE PISTON
ROD SEAL TYPE: NONE
PISTON SEAL TYPE: ''DA VEE SET''
530 LOADER/BACKHOE (BACKHOE SWING - BH MODELS 32,32S, BACKHOE BOOM - BH MODELS 31,32,32S, BACKHOE DIPPER - BH MODELS 31,32,32S)
580 LOADER/BACKHOE WITH BACKHOE MODELS 33, 33S (BACKHOE BOOM, BACKHOE DIPPER, BACKHOE SWING)
680 LOADER/BACKKHOE (BACKHOE
uxcell 10 Pcs 1/8" PT to 6mm Tube 90 Degree Pneumatic Push in Quick Connectors
You Save: 1%
mpn: a12060800ux0082, ean: 0608641099737,
4.5 out of 5 stars with 270 reviews
Elliptical sleeve configuration, hex nut.Push in to connect pneumatic fitting. Elbow type.Used to connect polyethylene, nylon and PU tubing.Simple push in design for connecting to the tube and provide secure connection, requires no extra sealing.Elliptical release ring on one end facilitates pneumatic installations in confined spaces. This Quick fittings are only used for industrial automatic apparatus and can not be applied on any medicinal equipment.Item Name : Push in to Connect
Kit King - John Deere AH149813 Aftermarket Hydraulic Cylinder Seal Kit
mpn: John Deere AH149813,
4.8 out of 5 stars with 52 reviews
Kit King USA Branded cylinder seal Kit that contains necessary seals for a hydraulic reseal. All parts are quality checked and protected by a poly bag to ensure they are ready for your professional repair and install. BE sure to double check part number with OEM before purchase for your intended application. Picture is of the actual Kit, but some part variation may occur due to part upgrades or various suppliers. Kit King USA kits meet or exceed OEM specifications, provide great performance and
3.5" Bore x 30" Stroke Hydraulic Tie Rod Cylinder, 2500 PSI, 1/2" NPT Ports
mpn: TRCL3530NPT, ean: 0748296491712,
4.0 out of 5 stars with 201 reviews
3.5'' Bore x 30'' Stroke Hydraulic Tie Rod Cylinder - 2500 psi - 1/2'' NPT Ports - 1 Year Replacement Warranty! From Tool Tuff Direct - Your Source for High Quality, Affordable Hydraulics Since 2012! - 3.5'' Bore - 30'' Stroke - 2500 PSI Working Pressure - 1-1/2'' Rod Diameter (piston - 40-1/4'' Retracted Dimension (Center of Pin to Center of Pin) - 70-1/4'' Extended Dimension (Center of Pin to Center of Pin) - 1/2'' NPT (Pipe Thread) Ports - 1'' Clevis Pin Diameter - 1 Year
Browse Our Catalog